[Mon Apr 30 21:32:29 2012] Detection parameters:
  Position = (339.3, 371.6) = 16 42 28.36 -54 24 12.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.4 +/- 20.1
  Background counts = 158.9
  Rate = 0.005 +/- 0.001

[Mon Apr 30 21:32:37 2012] Off-axis axis estimate = 6.08'
[Mon Apr 30 21:38:49 2012] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 21:38:49 2012] Initial guess for spatial extent in simple fitting = 9.47"
[Mon Apr 30 21:38:49 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.873
[Mon Apr 30 21:38:49 2012] Giving source the simple spatial ID 76 for pass 0, mean size = 9.47"
[Tue May  1 03:48:14 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src76.ximg exists
[Tue May  1 03:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src76.csv
[Tue May  1 03:48:14 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src76_1.ximg exists
[Tue May  1 03:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src76.csv
[Tue May  1 03:48:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 03:48:18 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Tue May  1 03:48:18 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Tue May  1 03:48:18 2012] Fit fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src76 appears to have run properly
[Tue May  1 12:21:37 2012] Spatial fit model total counts = 1534.180000, observed total counts = 1548.000000
[Tue May  1 12:21:37 2012] Offset between fit and detection position for source 77 = 4.475455 pixels
[Tue May  1 12:21:37 2012] 1546.759000 total counts/ 1134.630000 bgd. counts: snr = 12.235058
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 4.475455 pixels
  Position = (335.3, 373.7) = 16 42 30.34 -54 24 4.0
  Extent = 18.9 (18.9-37.9)", rotation angle = 0
  Source counts = 412.1 +/- 39.3
  Background counts = 1134.6
  Rate = 0.01 +/- 0.001
[Tue May  1 12:21:37 2012] Vigneting correction estimate = 1.000000
[Tue May  1 12:21:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 12:21:37 2012] Assessing source extent using major axis lower bound
[Tue May  1 12:21:37 2012] Source does appear to be extended
[Tue May  1 12:21:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 12:23:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  1 12:23:13 2012] Initial guess for spatial extent in simple fitting = 18.93"
[Tue May  1 12:23:13 2012] source mask rpix=4.4, npix_max = 94, mask sum = 83, frac = 0.881
[Tue May  1 12:23:13 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 18.93"
[Tue May  1 21:49:12 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src73.ximg exists
[Tue May  1 21:49:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src73.csv
[Tue May  1 21:49:12 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src73_1.ximg exists
[Tue May  1 21:49:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src73.csv
[Tue May  1 21:49:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 21:49:14 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Tue May  1 21:49:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src73.csv
[Tue May  1 21:49:14 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Tue May  1 21:49:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src73.csv
[Tue May  1 21:49:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 07:09:59 2012] Warning, spatial fit 73 centroid is now closest to src. 82
[Wed May  2 07:09:59 2012] Vigneting correction estimate = 1.000000
[Wed May  2 07:09:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 07:09:59 2012] Assessing source extent using major axis lower bound
[Wed May  2 07:09:59 2012] Source does appear to be extended
[Wed May  2 07:09:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 07:11:37 2012] XMMSAS src. selection expression = ellipse(29123.074000, 32461.454800, 1136.034033, 1136.034033, 0.000000, X, Y)
[Wed May  2 07:11:37 2012] Writing source region out to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src77_src.reg
[Wed May  2 07:11:37 2012] Extracting stamp from image fullrun_pn_xmm0603220201_pi300-10000_cl_sm2.00.img.gz, (270, 308) - (401, 439)
[Wed May  2 07:11:37 2012] XMMSAS bgd. selection expression = annulus(29123.074000, 32461.454800, 1893.390054, 3786.780109, X, Y) && !ellipse(30949.468842, 37102.061157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31549.013200, 28167.085200, 1443.704042, 621.618418, -0.000000, X, Y) && !ellipse(29027.944489, 28294.853729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28206.122650, 28418.721466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30970.708800, 28200.122400, 952.472027, 952.472027, 0.000000, X, Y) && !ellipse(30335.882400, 28183.741630, 782.668023, 782.668023, 0.000000, X, Y) && !ellipse(29663.145200, 28223.650000, 1318.328038, 591.476017, 3.640440, X, Y) && !ellipse(33311.303253, 36797.104492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32765.461090, 36800.375488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32641.415466, 29626.595184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32225.985687, 29334.544617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31915.655243, 36911.217651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23831.748107, 35569.713405, 1641.880047, 205.235206, 220.753234, X, Y) && !ellipse(24451.632000, 35051.540000, 1615.856046, 1615.856046, 0.000000, X, Y) && !ellipse(25196.248000, 34257.600000, 3231.712093, 3231.712093, 0.000000, X, Y) && !ellipse(30536.013000, 34359.921200, 370.916011, 370.916011, 0.000000, X, Y) && !ellipse(25695.774940, 34161.939800, 1579.480045, 197.435206, 31.904000, X, Y) && !ellipse(30143.651520, 34033.309265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26283.342468, 33384.377625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30284.778000, 32046.356200, 1540.896044, 1540.896044, 0.000000, X, Y) && !ellipse(30826.835693, 31826.127655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31349.432000, 31721.587400, 1540.896044, 1540.896044, 0.000000, X, Y) && !ellipse(31833.384000, 31683.972200, 1564.312045, 1564.312045, 0.000000, X, Y) && !ellipse(32724.841797, 31559.775116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32621.314240, 30950.403412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32124.515778, 28728.632416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27586.651215, 28584.915680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33234.190582, 28383.189209, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 07:11:37 2012] Writing fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src77.gif
[Wed May  2 10:27:06 2012] Mean detx,y = (-4449.40, 7937.31) 
[Wed May  2 10:27:13 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 10:28:19 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 10:28:19 2012] Setting source spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Wed May  2 10:28:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Wed May  2 23:18:13 2012] Updating aperture counts using extracted products
[Wed May  2 23:18:13 2012] Error reading totcts from fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Wed May  2 23:18:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 23:18:23 2012] Using photon index=1.80, rate=0.0118, arf fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src77.arf
[Wed May  2 23:18:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 23:18:23 2012] Updating source flux to 4.9e-14