[Mon Apr 30 21:32:25 2012] Detection parameters:
  Position = (371.0, 337.7) = 16 42 12.53 -54 26 38.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.8 +/- 20.8
  Background counts = 191.0
  Rate = 0.005 +/- 0.0005

[Mon Apr 30 21:32:37 2012] Off-axis axis estimate = 5.98'
[Mon Apr 30 21:38:49 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 21:38:49 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Mon Apr 30 21:38:49 2012] source mask rpix=2.2, npix_max = 28, mask sum = 15, frac = 0.528
[Mon Apr 30 21:38:49 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 9.42"
[Tue May  1 03:48:14 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src45.ximg exists
[Tue May  1 03:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src45.csv
[Tue May  1 03:48:14 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src45_1.ximg exists
[Tue May  1 03:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src45.csv
[Tue May  1 03:48:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 03:48:17 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Tue May  1 03:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src45.csv
[Tue May  1 03:48:17 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Tue May  1 03:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src45.csv
[Tue May  1 03:48:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 12:21:37 2012] Warning, spatial fit 45 centroid is now closest to src. 122
[Tue May  1 12:21:37 2012] Vigneting correction estimate = 1.000000
[Tue May  1 12:21:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 12:21:37 2012] Assessing source extent using major
[Tue May  1 12:21:37 2012] Source does appear to be extended
[Tue May  1 12:21:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 12:21:37 2012] Source is confused with source 45
[Tue May  1 12:23:13 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Tue May  1 12:23:13 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Tue May  1 12:23:13 2012] source mask rpix=2.2, npix_max = 28, mask sum = 15, frac = 0.528
[Tue May  1 12:23:13 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 9.42"
[Tue May  1 21:49:11 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src42.ximg exists
[Tue May  1 21:49:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src42.csv
[Tue May  1 21:49:11 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src42_1.ximg exists
[Tue May  1 21:49:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src42.csv
[Tue May  1 21:49:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 21:49:13 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Tue May  1 21:49:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src42.csv
[Tue May  1 21:49:13 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Tue May  1 21:49:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src42.csv
[Tue May  1 21:49:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 07:09:58 2012] Warning, spatial fit 42 centroid is now closest to src. 122
[Wed May  2 07:09:59 2012] Vigneting correction estimate = 1.000000
[Wed May  2 07:09:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 07:09:59 2012] Assessing source extent using major
[Wed May  2 07:09:59 2012] Source does appear to be extended
[Wed May  2 07:09:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 07:11:35 2012] XMMSAS src. selection expression = ellipse(32225.985687, 29334.544617, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  2 07:11:35 2012] Writing source region out to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src46_src.reg
[Wed May  2 07:11:35 2012] Extracting stamp from image fullrun_pn_xmm0603220201_pi300-10000_cl_sm2.00.img.gz, (333, 300) - (408, 375)
[Wed May  2 07:11:35 2012] XMMSAS bgd. selection expression = annulus(32225.985687, 29334.544617, 1087.500000, 2175.000000, X, Y) && !ellipse(31549.013200, 28167.085200, 1443.704042, 621.618418, -0.000000, X, Y) && !ellipse(30970.708800, 28200.122400, 952.472027, 952.472027, 0.000000, X, Y) && !ellipse(30335.882400, 28183.741630, 782.668023, 782.668023, 0.000000, X, Y) && !ellipse(29663.145200, 28223.650000, 1318.328038, 591.476017, 3.640440, X, Y) && !ellipse(32641.415466, 29626.595184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29485.929077, 26824.543640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29123.074000, 32461.454800, 1514.712044, 1514.712044, 0.000000, X, Y) && !ellipse(30284.778000, 32046.356200, 1540.896044, 1540.896044, 0.000000, X, Y) && !ellipse(30826.835693, 31826.127655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31349.432000, 31721.587400, 1540.896044, 1540.896044, 0.000000, X, Y) && !ellipse(31833.384000, 31683.972200, 1564.312045, 1564.312045, 0.000000, X, Y) && !ellipse(32724.841797, 31559.775116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32621.314240, 30950.403412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35109.387329, 28753.884399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32124.515778, 28728.632416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33234.190582, 28383.189209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30356.842407, 27459.477966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29950.543274, 27623.460541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31629.307678, 27355.236206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35119.325104, 27081.709778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34528.748352, 26997.951569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29962.135132, 26724.329559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30544.996368, 26707.544464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31294.304047, 26699.191742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31704.014893, 26647.957642, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 07:11:35 2012] Writing fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src46.gif
[Wed May  2 09:21:54 2012] Mean detx,y = (-7352.55, 4790.91) 
[Wed May  2 09:22:00 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 09:22:41 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 09:22:42 2012] Setting source spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Wed May  2 09:22:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Wed May  2 14:38:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  2 14:38:58 2012] rmf not generated due to insufficient counts
[Wed May  2 23:18:12 2012] Updating aperture counts using extracted products
[Wed May  2 23:18:12 2012] Error reading totcts from fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Wed May  2 23:18:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 23:18:22 2012] Using photon index=1.80, rate=0.00467, arf fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src46.arf
[Wed May  2 23:18:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 23:18:22 2012] Updating source flux to 2.5e-14
[Wed May  2 23:36:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting