[Mon Apr 30 21:32:24 2012] Detection parameters:
  Position = (319.1, 281.9) = 16 42 38.41 -54 30 44.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 385.5 +/- 33.7
  Background counts = 255.7
  Rate = 0.01 +/- 0.001

[Mon Apr 30 21:32:37 2012] Off-axis axis estimate = 1.91'
[Mon Apr 30 21:38:49 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 21:38:49 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Mon Apr 30 21:38:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.828
[Mon Apr 30 21:38:49 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 7.39"
[Tue May  1 03:48:14 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src33.ximg exists
[Tue May  1 03:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src33.csv
[Tue May  1 03:48:14 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue May  1 03:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src33.csv
[Tue May  1 03:48:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 03:48:16 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue May  1 03:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Tue May  1 03:48:16 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue May  1 03:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Tue May  1 03:48:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 12:21:36 2012] Warning, spatial fit 33 centroid is now closest to src. 147
[Tue May  1 12:21:37 2012] Vigneting correction estimate = 1.000000
[Tue May  1 12:21:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 12:21:37 2012] Assessing source extent using major
[Tue May  1 12:21:37 2012] Source does appear to be extended
[Tue May  1 12:21:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 12:21:37 2012] Source is confused with source 50
[Tue May  1 12:21:37 2012] Source is confused with source 149
[Tue May  1 12:23:13 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Tue May  1 12:23:13 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Tue May  1 12:23:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.828
[Tue May  1 12:23:13 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 7.39"
[Tue May  1 21:49:11 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src31.ximg exists
[Tue May  1 21:49:11 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src31_1.ximg exists
[Tue May  1 21:49:11 2012] Fit fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src31 appears to have run properly
[Tue May  1 21:49:13 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Tue May  1 21:49:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src31.csv
[Tue May  1 21:49:13 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Tue May  1 21:49:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src31.csv
[Tue May  1 21:49:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 07:09:58 2012] Source 33 is offset by 7.385249 and 0.530556 pixels which is larger than
2 X fitted extent = 7.330989 x 7.330989, not incorporating fit results
[Wed May  2 07:09:59 2012] Vigneting correction estimate = 1.000000
[Wed May  2 07:09:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 07:09:59 2012] Assessing source extent using major
[Wed May  2 07:09:59 2012] Source does appear to be extended
[Wed May  2 07:09:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 07:11:34 2012] XMMSAS src. selection expression = ellipse(27709.220642, 24480.694397, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  2 07:11:34 2012] Writing source region out to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src33_src.reg
[Wed May  2 07:11:34 2012] Extracting stamp from image fullrun_pn_xmm0603220201_pi300-10000_cl_sm2.00.img.gz, (282, 244) - (357, 319)
[Wed May  2 07:11:34 2012] XMMSAS bgd. selection expression = annulus(27709.220642, 24480.694397, 1087.500000, 2175.000000, X, Y) && !ellipse(29130.046295, 25190.102295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29364.514587, 24561.463043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25620.100380, 26831.993600, 364.757610, 364.757610, 0.000000, X, Y) && !ellipse(29485.929077, 26824.543640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28178.608582, 24649.774628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30356.842407, 27459.477966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26458.205353, 27316.640045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29962.135132, 26724.329559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30544.996368, 26707.544464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27615.399872, 27032.047455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28217.085266, 26992.880463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28488.665558, 26406.150848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29344.678864, 26061.243958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26701.472412, 25621.995911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28205.939453, 25432.102905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27709.063995, 25085.796814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25770.154510, 25185.490509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29320.754395, 24002.743988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26326.675201, 22470.513306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26058.634064, 21964.393036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26718.671692, 21769.427597, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 07:11:34 2012] Writing fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src33.gif
[Wed May  2 09:03:56 2012] Mean detx,y = (-2871.42, 10.32) 
[Wed May  2 09:04:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 09:04:30 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 09:04:31 2012] Setting source spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed May  2 09:04:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Wed May  2 14:20:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  2 14:20:49 2012] rmf not generated due to insufficient counts
[Wed May  2 23:18:11 2012] Updating aperture counts using extracted products
[Wed May  2 23:18:11 2012] Error reading totcts from fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed May  2 23:18:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 23:18:21 2012] Using photon index=1.80, rate=0.0133, arf fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src33.arf
[Wed May  2 23:18:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 23:18:21 2012] Updating source flux to 4.2e-14
[Wed May  2 23:36:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting