[Mon Apr 30 21:32:23 2012] Detection parameters:
  Position = (335.4, 290.1) = 16 42 30.25 -54 30 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 364.6 +/- 32.3
  Background counts = 235.9
  Rate = 0.01 +/- 0.001

[Mon Apr 30 21:32:37 2012] Off-axis axis estimate = 2.75'
[Mon Apr 30 21:38:49 2012] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 21:38:49 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Mon Apr 30 21:38:49 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.951
[Mon Apr 30 21:38:49 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 7.80"
[Tue May  1 03:48:14 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src30.ximg exists
[Tue May  1 03:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src30.csv
[Tue May  1 03:48:14 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue May  1 03:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src30.csv
[Tue May  1 03:48:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 03:48:16 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue May  1 03:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Tue May  1 03:48:16 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue May  1 03:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Tue May  1 03:48:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 12:21:36 2012] Spatial fit model total counts = 3977.730000, observed total counts = 3212.000000
[Tue May  1 12:21:36 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  1 12:21:37 2012] Vigneting correction estimate = 1.000000
[Tue May  1 12:21:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 12:21:37 2012] Assessing source extent using major
[Tue May  1 12:21:37 2012] Source does appear to be extended
[Tue May  1 12:21:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 12:23:13 2012] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Tue May  1 12:23:13 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Tue May  1 12:23:13 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.951
[Tue May  1 12:23:13 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 7.80"
[Tue May  1 21:49:11 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src28.ximg exists
[Tue May  1 21:49:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src28.csv
[Tue May  1 21:49:11 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue May  1 21:49:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src28.csv
[Tue May  1 21:49:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 21:49:13 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue May  1 21:49:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src28.csv
[Tue May  1 21:49:13 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue May  1 21:49:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src28.csv
[Tue May  1 21:49:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 07:09:58 2012] Warning, spatial fit 28 centroid is now closest to src. 32
[Wed May  2 07:09:59 2012] Vigneting correction estimate = 1.000000
[Wed May  2 07:09:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 07:09:59 2012] Assessing source extent using major
[Wed May  2 07:09:59 2012] Source does appear to be extended
[Wed May  2 07:09:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 07:11:33 2012] XMMSAS src. selection expression = ellipse(29130.046295, 25190.102295, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  2 07:11:33 2012] Writing source region out to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src30_src.reg
[Wed May  2 07:11:33 2012] Extracting stamp from image fullrun_pn_xmm0603220201_pi300-10000_cl_sm2.00.img.gz, (298, 253) - (373, 328)
[Wed May  2 07:11:34 2012] XMMSAS bgd. selection expression = annulus(29130.046295, 25190.102295, 1087.500000, 2175.000000, X, Y) && !ellipse(31549.013200, 28167.085200, 1443.704042, 621.618418, -0.000000, X, Y) && !ellipse(30970.708800, 28200.122400, 952.472027, 952.472027, 0.000000, X, Y) && !ellipse(29663.145200, 28223.650000, 1318.328038, 591.476017, 3.640440, X, Y) && !ellipse(29364.514587, 24561.463043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27709.220642, 24480.694397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28142.715240, 27692.990448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29485.929077, 26824.543640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28178.608582, 24649.774628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30356.842407, 27459.477966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29950.543274, 27623.460541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31629.307678, 27355.236206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26458.205353, 27316.640045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29962.135132, 26724.329559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30544.996368, 26707.544464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27615.399872, 27032.047455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31294.304047, 26699.191742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28217.085266, 26992.880463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31704.014893, 26647.957642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28488.665558, 26406.150848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29344.678864, 26061.243958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31620.386780, 25473.794830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26701.472412, 25621.995911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28205.939453, 25432.102905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27709.063995, 25085.796814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29320.754395, 24002.743988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26326.675201, 22470.513306, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 07:11:34 2012] Writing fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src30.gif
[Wed May  2 09:01:11 2012] Mean detx,y = (-4302.69, 699.59) 
[Wed May  2 09:01:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 09:01:57 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 09:01:57 2012] Setting source spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed May  2 09:01:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Wed May  2 14:19:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  2 14:19:54 2012] rmf not generated due to insufficient counts
[Wed May  2 23:18:11 2012] Updating aperture counts using extracted products
[Wed May  2 23:18:11 2012] Error reading totcts from fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed May  2 23:18:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 23:18:21 2012] Using photon index=1.80, rate=0.0138, arf fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src30.arf
[Wed May  2 23:18:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 23:18:21 2012] Updating source flux to 4.8e-14
[Wed May  2 23:36:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting