[Mon Apr 30 21:32:23 2012] Detection parameters:
  Position = (487.4, 309.9) = 16 41 14.37 -54 28 41.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175.7 +/- 24.5
  Background counts = 123.7
  Rate = 0.005 +/- 0.0006

[Mon Apr 30 21:32:37 2012] Off-axis axis estimate = 13.73'
[Mon Apr 30 21:38:49 2012] Using EEF radius (= 13.29 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 21:38:49 2012] Initial guess for spatial extent in simple fitting = 13.29"
[Mon Apr 30 21:38:49 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.969
[Mon Apr 30 21:38:49 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 13.29"
[Tue May  1 03:48:13 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src20.ximg exists
[Tue May  1 03:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src20.csv
[Tue May  1 03:48:13 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue May  1 03:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src20.csv
[Tue May  1 03:48:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 03:48:16 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue May  1 03:48:16 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue May  1 03:48:16 2012] Fit fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Tue May  1 12:21:36 2012] Warning, spatial fit 20 centroid is now closest to src. 21
[Tue May  1 12:21:36 2012] Source 20 is offset by -7.110942 and -3.347096 pixels which is larger than
2 X fitted extent = 1.539172 x 1.539172, not incorporating fit results
[Tue May  1 12:21:36 2012] Spatial fit model total counts = 2035.010000, observed total counts = 1986.000000
[Tue May  1 12:21:36 2012] Offset between fit and detection position for source 20 = 4.095891 pixels
[Tue May  1 12:21:36 2012] Warning, changing simple spatial fit ID from 20 to 26
[Tue May  1 12:21:36 2012] 1529.705320 total counts/ 0.005320 bgd. counts: snr = 20971.664429
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 4.095891 pixels
  Position = (491.3, 311.3) = 16 41 12.46 -54 28 33.1
  Extent = 24.3 (20.8-26.7)", rotation angle = 0
  Source counts = 1529.7 +/- 39.1
  Background counts = 0.0
  Rate = 0.04 +/- 0.001
[Tue May  1 12:21:37 2012] Vigneting correction estimate = 1.000000
[Tue May  1 12:21:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 12:21:37 2012] Assessing source extent using major axis lower bound
[Tue May  1 12:21:37 2012] Source does appear to be extended
[Tue May  1 12:21:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 12:21:37 2012] Source is confused with source 21
[Tue May  1 12:21:37 2012] Source is confused with source 24
[Tue May  1 12:21:37 2012] Source is confused with source 25
[Tue May  1 12:21:37 2012] Source is confused with source 26
[Tue May  1 12:23:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  1 12:23:13 2012] Initial guess for spatial extent in simple fitting = 24.30"
[Tue May  1 12:23:13 2012] source mask rpix=5.6, npix_max = 148, mask sum = 141, frac = 0.952
[Tue May  1 12:23:13 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 24.30"
[Tue May  1 21:49:10 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src19.ximg exists
[Tue May  1 21:49:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src19.csv
[Tue May  1 21:49:10 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue May  1 21:49:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src19.csv
[Tue May  1 21:49:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 21:49:13 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue May  1 21:49:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src19.csv
[Tue May  1 21:49:13 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue May  1 21:49:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src19.csv
[Tue May  1 21:49:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 07:09:58 2012] Warning, spatial fit 19 centroid is now closest to src. 25
[Wed May  2 07:09:58 2012] Spatial fit model total counts = 2068.040000, observed total counts = 1986.000000
[Wed May  2 07:09:58 2012] Offset between fit and detection position for source 20 = 0.391331 pixels
[Wed May  2 07:09:58 2012] Warning, changing simple spatial fit ID from 19 to 24
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.391331 pixels
  Position = (491.3, 311.7) = 16 41 12.43 -54 28 31.4
  Extent = 22.2 (19.2-25.8)", rotation angle = 0
  Source counts = 1212.1 +/- 34.8
  Background counts = 0.0
  Rate = 0.03 +/- 0.001
[Wed May  2 07:09:59 2012] Vigneting correction estimate = 1.000000
[Wed May  2 07:09:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 07:09:59 2012] Assessing source extent using major axis lower bound
[Wed May  2 07:09:59 2012] Source does appear to be extended
[Wed May  2 07:09:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 07:11:30 2012] Counts = 1212.110000, rescaling region sizes by 2.000000
[Wed May  2 07:11:30 2012] XMMSAS src. selection expression = ellipse(42698.667200, 27067.076000, 2660.664077, 2660.664077, 0.000000, X, Y)
[Wed May  2 07:11:30 2012] Writing source region out to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src20_src.reg
[Wed May  2 07:11:30 2012] Extracting stamp from image fullrun_pn_xmm0603220201_pi300-10000_cl_sm2.00.img.gz, (338, 159) - (595, 465)
[Wed May  2 07:11:31 2012] XMMSAS bgd. selection expression = annulus(42698.667200, 27067.076000, 8868.880255, 17737.760510, X, Y) && !ellipse(39246.456000, 25059.474000, 1951.760056, 1951.760056, 0.000000, X, Y) && !ellipse(25184.863922, 14155.819122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30949.468842, 37102.061157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33917.557953, 13797.893295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41634.697968, 30822.725708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42507.175110, 30563.979828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40846.946000, 30672.006000, 2042.768059, 2042.768059, 0.000000, X, Y) && !ellipse(39163.672821, 28577.763031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31549.013200, 28167.085200, 1443.704042, 621.618418, -0.000000, X, Y) && !ellipse(29027.944489, 28294.853729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28206.122650, 28418.721466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30970.708800, 28200.122400, 952.472027, 952.472027, 0.000000, X, Y) && !ellipse(30335.882400, 28183.741630, 782.668023, 782.668023, 0.000000, X, Y) && !ellipse(29663.145200, 28223.650000, 1318.328038, 591.476017, 3.640440, X, Y) && !ellipse(42848.186000, 27210.444000, 2125.320061, 2125.320061, 0.000000, X, Y) && !ellipse(41974.756775, 26650.872864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41586.364000, 26375.556000, 2037.704059, 2037.704059, 0.000000, X, Y) && !ellipse(42453.394000, 26605.132000, 3992.368115, 3992.368115, 0.000000, X, Y) && !ellipse(40997.600000, 26022.608400, 1996.184057, 1996.184057, 0.000000, X, Y) && !ellipse(40536.622000, 25718.698000, 2357.440068, 2357.440068, 0.000000, X, Y) && !ellipse(39770.172000, 25225.540000, 1996.184057, 1996.184057, 0.000000, X, Y) && !ellipse(29130.046295, 25190.102295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29364.514587, 24561.463043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27709.220642, 24480.694397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35150.040000, 36847.279800, 884.456025, 884.456025, 0.000000, X, Y) && !ellipse(33311.303253, 36797.104492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32765.461090, 36800.375488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42889.547119, 31525.511963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39234.801000, 30222.495200, 1976.064057, 247.007207, 335.454800, X, Y) && !ellipse(32641.415466, 29626.595184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32225.985687, 29334.544617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28142.715240, 27692.990448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25620.100380, 26831.993600, 364.757610, 364.757610, 0.000000, X, Y) && !ellipse(29485.929077, 26824.543640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28178.608582, 24649.774628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33431.249512, 18996.127365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27189.875671, 38618.343079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35026.298000, 36730.034000, 2003.888058, 2003.888058, 0.000000, X, Y) && !ellipse(31915.655243, 36911.217651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23320.312000, 35959.358000, 1847.112053, 1847.112053, 0.000000, X, Y) && !ellipse(23831.748107, 35569.713405, 1641.880047, 205.235206, 220.753234, X, Y) && !ellipse(24451.632000, 35051.540000, 1615.856046, 1615.856046, 0.000000, X, Y) && !ellipse(25196.248000, 34257.600000, 3231.712093, 3231.712093, 0.000000, X, Y) && !ellipse(30536.013000, 34359.921200, 370.916011, 370.916011, 0.000000, X, Y) && !ellipse(25695.774940, 34161.939800, 1579.480045, 197.435206, 31.904000, X, Y) && !ellipse(30143.651520, 34033.309265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23508.956000, 33872.673200, 1599.248046, 1599.248046, 0.000000, X, Y) && !ellipse(26283.342468, 33384.377625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29123.074000, 32461.454800, 1514.712044, 1514.712044, 0.000000, X, Y) && !ellipse(30284.778000, 32046.356200, 1540.896044, 1540.896044, 0.000000, X, Y) && !ellipse(30826.835693, 31826.127655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38362.748718, 31771.041107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31349.432000, 31721.587400, 1540.896044, 1540.896044, 0.000000, X, Y) && !ellipse(31833.384000, 31683.972200, 1564.312045, 1564.312045, 0.000000, X, Y) && !ellipse(36806.118317, 31461.061127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32724.841797, 31559.775116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36297.464000, 31356.368400, 569.011216, 569.011216, 0.000000, X, Y) && !ellipse(32621.314240, 30950.403412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39857.771820, 30475.535492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39397.262000, 29848.614400, 2007.760058, 2007.760058, 0.000000, X, Y) && !ellipse(38447.579559, 29873.603180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41675.057068, 29962.753754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40549.651215, 30072.037415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40048.657806, 29913.864044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37149.891510, 29385.138855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35954.395538, 28978.348541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39879.033295, 28907.042419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35109.387329, 28753.884399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32124.515778, 28728.632416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27586.651215, 28584.915680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38642.652527, 28262.053497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40229.613983, 28197.496460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33234.190582, 28383.189209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38174.071716, 28092.126312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37413.575745, 27732.385773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30356.842407, 27459.477966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36428.440399, 27429.306213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29950.543274, 27623.460541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31629.307678, 27355.236206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26458.205353, 27316.640045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35119.325104, 27081.709778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34528.748352, 26997.951569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29962.135132, 26724.329559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30544.996368, 26707.544464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27615.399872, 27032.047455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31294.304047, 26699.191742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28217.085266, 26992.880463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31704.014893, 26647.957642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28488.665558, 26406.150848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29344.678864, 26061.243958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32675.360016, 25536.798676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31620.386780, 25473.794830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26701.472412, 25621.995911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28205.939453, 25432.102905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27709.063995, 25085.796814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25770.154510, 25185.490509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37604.583862, 24717.031830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37074.438232, 24473.042603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37492.605347, 24327.435486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36527.340240, 24154.632904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33338.671295, 23828.457245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29320.754395, 24002.743988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35961.487122, 24041.130402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26326.675201, 22470.513306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26058.634064, 21964.393036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26718.671692, 21769.427597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25659.761047, 21432.848206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25106.437012, 21001.955536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23667.196000, 20072.218000, 1477.672043, 1477.672043, 0.000000, X, Y) && !ellipse(24762.493896, 20734.129456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34876.103180, 18259.631531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26100.068451, 8686.121582, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 07:11:31 2012] Writing fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src20.gif
[Wed May  2 07:43:16 2012] Mean detx,y = (-16925.03, 2298.01) 
[Wed May  2 07:43:26 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 07:50:38 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 07:50:38 2012] Setting source spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed May  2 07:50:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed May  2 23:18:10 2012] Updating aperture counts using extracted products
[Wed May  2 23:18:10 2012] Error reading totcts from fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed May  2 23:18:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 23:18:21 2012] Using photon index=1.80, rate=0.0347, arf fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src20.arf
[Wed May  2 23:18:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 23:18:21 2012] Updating source flux to 2.8e-13
[Wed May  2 23:36:14 2012] Flag b found in src. 20 procflags, skipping spectral fitting
[Wed May  2 23:36:14 2012] Flag c found in src. 20 procflags, skipping spectral fitting