[Mon Apr 30 21:32:22 2012] Detection parameters:
  Position = (334.2, 325.8) = 16 42 30.86 -54 27 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 458.7 +/- 33.8
  Background counts = 219.6
  Rate = 0.02 +/- 0.001

[Mon Apr 30 21:32:37 2012] Off-axis axis estimate = 3.26'
[Mon Apr 30 21:38:49 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 21:38:49 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Mon Apr 30 21:38:49 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.129
[Mon Apr 30 21:38:49 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.06"
[Tue May  1 03:48:13 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src15.ximg exists
[Tue May  1 03:48:13 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue May  1 03:48:13 2012] Fit fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src15 appears to have run properly
[Tue May  1 03:48:16 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue May  1 03:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue May  1 03:48:16 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue May  1 03:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue May  1 03:48:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 12:21:36 2012] Warning, spatial fit 15 centroid is now closest to src. 47
[Tue May  1 12:21:36 2012] Source 15 is offset by 0.794052 and -7.796371 pixels which is larger than
2 X fitted extent = 0.947756 x 0.947756, not incorporating fit results
[Tue May  1 12:21:37 2012] Vigneting correction estimate = 1.000000
[Tue May  1 12:21:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 12:21:37 2012] Assessing source extent using major
[Tue May  1 12:21:37 2012] Source does appear to be extended
[Tue May  1 12:21:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 12:21:37 2012] Source is confused with source 19
[Tue May  1 12:23:13 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Tue May  1 12:23:13 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Tue May  1 12:23:13 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.129
[Tue May  1 12:23:13 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 8.06"
[Tue May  1 21:49:10 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src14.ximg exists
[Tue May  1 21:49:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src14.csv
[Tue May  1 21:49:10 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src14_1.ximg exists
[Tue May  1 21:49:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src14.csv
[Tue May  1 21:49:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 21:49:13 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Tue May  1 21:49:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Tue May  1 21:49:13 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Tue May  1 21:49:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Tue May  1 21:49:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 07:09:58 2012] Spatial fit model total counts = 3401.910000, observed total counts = 2960.000000
[Wed May  2 07:09:58 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  2 07:09:59 2012] Vigneting correction estimate = 1.000000
[Wed May  2 07:09:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 07:09:59 2012] Assessing source extent using major
[Wed May  2 07:09:59 2012] Source does appear to be extended
[Wed May  2 07:09:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 07:11:30 2012] XMMSAS src. selection expression = ellipse(29027.944489, 28294.853729, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  2 07:11:30 2012] Writing source region out to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src15_src.reg
[Wed May  2 07:11:30 2012] Extracting stamp from image fullrun_pn_xmm0603220201_pi300-10000_cl_sm2.00.img.gz, (297, 288) - (372, 363)
[Wed May  2 07:11:30 2012] XMMSAS bgd. selection expression = annulus(29027.944489, 28294.853729, 1087.500000, 2175.000000, X, Y) && !ellipse(31549.013200, 28167.085200, 1443.704042, 621.618418, -0.000000, X, Y) && !ellipse(28206.122650, 28418.721466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30970.708800, 28200.122400, 952.472027, 952.472027, 0.000000, X, Y) && !ellipse(30335.882400, 28183.741630, 782.668023, 782.668023, 0.000000, X, Y) && !ellipse(29663.145200, 28223.650000, 1318.328038, 591.476017, 3.640440, X, Y) && !ellipse(28142.715240, 27692.990448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29485.929077, 26824.543640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31349.432000, 31721.587400, 1540.896044, 1540.896044, 0.000000, X, Y) && !ellipse(31833.384000, 31683.972200, 1564.312045, 1564.312045, 0.000000, X, Y) && !ellipse(27586.651215, 28584.915680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30356.842407, 27459.477966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29950.543274, 27623.460541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31629.307678, 27355.236206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26458.205353, 27316.640045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29962.135132, 26724.329559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30544.996368, 26707.544464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27615.399872, 27032.047455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31294.304047, 26699.191742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28217.085266, 26992.880463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31704.014893, 26647.957642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28488.665558, 26406.150848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29344.678864, 26061.243958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31620.386780, 25473.794830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26701.472412, 25621.995911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28205.939453, 25432.102905, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 07:11:30 2012] Writing fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src15.gif
[Wed May  2 07:36:56 2012] Mean detx,y = (-4295.27, 3769.59) 
[Wed May  2 07:37:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 07:37:34 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 07:37:34 2012] Setting source spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed May  2 07:37:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed May  2 13:10:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  2 13:10:24 2012] rmf not generated due to insufficient counts
[Wed May  2 23:18:10 2012] Updating aperture counts using extracted products
[Wed May  2 23:18:10 2012] Error reading totcts from fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed May  2 23:18:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 23:18:20 2012] Using photon index=1.80, rate=0.0187, arf fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src15.arf
[Wed May  2 23:18:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 23:18:20 2012] Updating source flux to 7e-14
[Wed May  2 23:36:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting