[Mon Apr 30 21:32:31 2012] Detection parameters:
  Position = (442.5, 343.9) = 16 41 36.88 -54 26 13.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.6 +/- 22.0
  Background counts = 137.7
  Rate = 0.003 +/- 0.0006

[Mon Apr 30 21:32:37 2012] Off-axis axis estimate = 10.95'
[Mon Apr 30 21:38:49 2012] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 21:38:49 2012] Initial guess for spatial extent in simple fitting = 11.90"
[Mon Apr 30 21:38:49 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.002
[Mon Apr 30 21:38:49 2012] Giving source the simple spatial ID 99 for pass 0, mean size = 11.90"
[Tue May  1 03:48:15 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src99.ximg exists
[Tue May  1 03:48:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src99.csv
[Tue May  1 03:48:15 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src99_1.ximg exists
[Tue May  1 03:48:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src99.csv
[Tue May  1 03:48:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src99_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 03:48:19 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src99.ximg exists
[Tue May  1 03:48:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src99.csv
[Tue May  1 03:48:19 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src99_1.ximg exists
[Tue May  1 03:48:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src99.csv
[Tue May  1 03:48:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src99_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 12:21:37 2012] Warning, spatial fit 99 centroid is now closest to src. 44
[Tue May  1 12:21:37 2012] Vigneting correction estimate = 1.000000
[Tue May  1 12:21:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 12:21:37 2012] Assessing source extent using major
[Tue May  1 12:21:37 2012] Source does appear to be extended
[Tue May  1 12:21:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 12:21:37 2012] Source is confused with source 44
[Tue May  1 12:23:13 2012] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Tue May  1 12:23:13 2012] Initial guess for spatial extent in simple fitting = 11.90"
[Tue May  1 12:23:13 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.002
[Tue May  1 12:23:13 2012] Giving source the simple spatial ID 96 for pass 1, mean size = 11.90"
[Tue May  1 21:49:12 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src96.ximg exists
[Tue May  1 21:49:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src96.csv
[Tue May  1 21:49:12 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src96_1.ximg exists
[Tue May  1 21:49:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src96.csv
[Tue May  1 21:49:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src96_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 21:49:15 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src96.ximg exists
[Tue May  1 21:49:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src96.csv
[Tue May  1 21:49:15 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src96_1.ximg exists
[Tue May  1 21:49:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src96.csv
[Tue May  1 21:49:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src96_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 07:09:58 2012] Source 102 is offset by 0.560708 and 3.464933 pixels which is larger than
2 X fitted extent = 1.446303 x 1.446303, not incorporating fit results
[Wed May  2 07:09:59 2012] Warning, spatial fit 96 centroid is now closest to src. 100
[Wed May  2 07:09:59 2012] Vigneting correction estimate = 1.000000
[Wed May  2 07:09:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 07:09:59 2012] Assessing source extent using major
[Wed May  2 07:09:59 2012] Source does appear to be extended
[Wed May  2 07:09:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 07:11:38 2012] XMMSAS src. selection expression = ellipse(38447.579559, 29873.603180, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  2 07:11:38 2012] Writing source region out to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src102_src.reg
[Wed May  2 07:11:38 2012] Extracting stamp from image fullrun_pn_xmm0603220201_pi300-10000_cl_sm2.00.img.gz, (405, 306) - (480, 381)
[Wed May  2 07:11:38 2012] XMMSAS bgd. selection expression = annulus(38447.579559, 29873.603180, 1087.500000, 2175.000000, X, Y) && !ellipse(40846.946000, 30672.006000, 2042.768059, 2042.768059, 0.000000, X, Y) && !ellipse(39163.672821, 28577.763031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41586.364000, 26375.556000, 2037.704059, 2037.704059, 0.000000, X, Y) && !ellipse(42453.394000, 26605.132000, 3992.368115, 3992.368115, 0.000000, X, Y) && !ellipse(40997.600000, 26022.608400, 1996.184057, 1996.184057, 0.000000, X, Y) && !ellipse(40536.622000, 25718.698000, 2357.440068, 2357.440068, 0.000000, X, Y) && !ellipse(39234.801000, 30222.495200, 1976.064057, 247.007207, 335.454800, X, Y) && !ellipse(38362.748718, 31771.041107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36806.118317, 31461.061127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36297.464000, 31356.368400, 569.011216, 569.011216, 0.000000, X, Y) && !ellipse(39857.771820, 30475.535492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39397.262000, 29848.614400, 2007.760058, 2007.760058, 0.000000, X, Y) && !ellipse(40549.651215, 30072.037415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40048.657806, 29913.864044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37149.891510, 29385.138855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35954.395538, 28978.348541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39879.033295, 28907.042419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38642.652527, 28262.053497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40229.613983, 28197.496460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38174.071716, 28092.126312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37413.575745, 27732.385773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36428.440399, 27429.306213, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 07:11:38 2012] Writing fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src102.gif
[Wed May  2 11:03:32 2012] Mean detx,y = (-13694.94, 5218.06) 
[Wed May  2 11:03:37 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 11:04:04 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 11:04:05 2012] Setting source spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Wed May  2 11:04:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Wed May  2 16:54:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  2 16:54:59 2012] rmf not generated due to insufficient counts
[Wed May  2 23:18:15 2012] Updating aperture counts using extracted products
[Wed May  2 23:18:15 2012] Error reading totcts from fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Wed May  2 23:18:25 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 23:18:25 2012] Using photon index=1.80, rate=0.00312, arf fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src102.arf
[Wed May  2 23:18:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 23:18:25 2012] Updating source flux to 2.3e-14
[Wed May  2 23:36:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting