[Mon Apr 30 21:32:50 2012] Detection parameters:
  Position = (352.8, 328.1) = 16 42 21.61 -54 27 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.8 +/- 14.9
  Background counts = 36.2
  Rate = 0.003 +/- 0.0005

[Mon Apr 30 21:32:55 2012] Off-axis axis estimate = 4.49'
[Tue May  1 08:34:50 2012] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Tue May  1 08:34:50 2012] Initial guess for spatial extent in simple fitting = 8.67"
[Tue May  1 08:34:50 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.005
[Tue May  1 08:34:50 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 8.67"
[Tue May  1 12:20:51 2012] fullrun_mos2_xmm0603220201_pi300-10000_cl_pass0_src24.ximg exists
[Tue May  1 12:20:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603220201_pi300-10000_cl_pass0_src24.csv
[Tue May  1 12:20:51 2012] fullrun_mos2_xmm0603220201_pi300-10000_cl_pass0_src24_1.ximg exists
[Tue May  1 12:20:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603220201_pi300-10000_cl_pass0_src24.csv
[Tue May  1 12:20:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603220201_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603220201_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 12:20:53 2012] fullrun_mos2_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Tue May  1 12:20:53 2012] fullrun_mos2_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Tue May  1 12:20:53 2012] Fit fullrun_mos2_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Tue May  1 12:22:23 2012] Spatial fit model total counts = 753.033000, observed total counts = 710.000000
[Tue May  1 12:22:23 2012] Offset between fit and detection position for source 31 = 1.855473 pixels
[Tue May  1 12:22:23 2012] 687.312200 total counts/ 588.178000 bgd. counts: snr = 4.087607
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.855473 pixels
  Position = (353.0, 329.9) = 16 42 21.50 -54 27 14.1
  Extent = 13.2 (6.0-17.3)", rotation angle = 0
  Source counts = 99.1 +/- 26.2
  Background counts = 588.2
  Rate = 0.003 +/- 0.0007
[Tue May  1 12:22:23 2012] Vigneting correction estimate = 1.000000
[Tue May  1 12:22:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 12:22:23 2012] Assessing source extent using major axis lower bound
[Tue May  1 12:22:23 2012] Source does appear to be extended
[Tue May  1 12:22:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 12:22:23 2012] Source is confused with source 29
[Wed May  2 03:48:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  2 03:48:40 2012] Initial guess for spatial extent in simple fitting = 13.20"
[Wed May  2 03:48:40 2012] source mask rpix=3.0, npix_max = 49, mask sum = 56, frac = 1.121
[Wed May  2 03:48:40 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 13.20"
[Wed May  2 07:09:18 2012] fullrun_mos2_xmm0603220201_pi300-10000_cl_pass1_src23.ximg exists
[Wed May  2 07:09:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603220201_pi300-10000_cl_pass1_src23.csv
[Wed May  2 07:09:18 2012] fullrun_mos2_xmm0603220201_pi300-10000_cl_pass1_src23_1.ximg exists
[Wed May  2 07:09:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603220201_pi300-10000_cl_pass1_src23.csv
[Wed May  2 07:09:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603220201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603220201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 07:09:19 2012] fullrun_mos2_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Wed May  2 07:09:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src23.csv
[Wed May  2 07:09:19 2012] fullrun_mos2_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Wed May  2 07:09:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src23.csv
[Wed May  2 07:09:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 07:10:41 2012] Spatial fit model total counts = 1113.800000, observed total counts = 859.000000
[Wed May  2 07:10:41 2012] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  2 07:10:41 2012] Vigneting correction estimate = 1.000000
[Wed May  2 07:10:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 07:10:41 2012] Assessing source extent using major axis lower bound
[Wed May  2 07:10:41 2012] Source does appear to be extended
[Wed May  2 07:10:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 21:14:10 2012] XMMSAS src. selection expression = ellipse(30661.070400, 28657.092400, 791.982023, 791.982023, 0.000000, X, Y)
[Wed May  2 21:14:10 2012] Writing source region out to fullrun_mos2_xmm0603220201_pi300-10000_pass1_cl_src31_src.reg
[Wed May  2 21:14:10 2012] Extracting stamp from image fullrun_mos2_xmm0603220201_pi300-10000_cl_sm2.00.img.gz, (307, 284) - (398, 375)
[Wed May  2 21:14:11 2012] XMMSAS bgd. selection expression = annulus(30661.070400, 28657.092400, 1319.970038, 2639.940076, X, Y) && !ellipse(29815.383000, 27690.790600, 596.940017, 596.940017, 0.000000, X, Y) && !ellipse(32035.726288, 28921.445953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32389.914380, 29723.513400, 629.376818, 629.376818, 0.000000, X, Y) && !ellipse(29051.261400, 28743.728400, 1313.592038, 1313.592038, 0.000000, X, Y) && !ellipse(30796.716000, 25829.565200, 2522.704073, 2522.704073, 0.000000, X, Y) && !ellipse(31804.802460, 28352.536896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29775.618000, 25688.244000, 1272.696037, 1272.696037, 0.000000, X, Y) && !ellipse(30699.290741, 27183.293854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28824.922000, 25185.094000, 1672.160048, 1672.160048, 0.000000, X, Y) && !ellipse(30913.846313, 27890.962708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28313.932770, 25777.362915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28733.746002, 27112.407227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27621.325897, 27569.332458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30101.263977, 28465.306610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29575.454010, 26032.099701, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 21:14:11 2012] Writing fullrun_mos2_xmm0603220201_pi300-10000_pass1_cl_src31.gif
[Wed May  2 21:25:38 2012] Mean detx,y = (5903.62, -4282.76) 
[Wed May  2 21:25:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 21:26:37 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 21:26:37 2012] Setting source spectrum file to fullrun_mos2_xmm0603220201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed May  2 21:26:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603220201_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Wed May  2 22:06:24 2012] Not generating rmf since there are only 99 counts
[Wed May  2 22:06:24 2012] rmf not generated due to insufficient counts
[Wed May  2 23:18:43 2012] Updating aperture counts using extracted products
[Wed May  2 23:18:43 2012] Error reading totcts from fullrun_mos2_xmm0603220201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed May  2 23:18:47 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 23:18:47 2012] Using photon index=1.80, rate=0.00253, arf fullrun_mos2_xmm0603220201_pi300-10000_pass1_cl_src31.arf
[Wed May  2 23:18:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 23:18:47 2012] Updating source flux to 3.6e-14
[Wed May  2 23:29:15 2012] Flag p found in src. 31 procflags, skipping spectral fitting
[Wed May  2 23:29:15 2012] Flag c found in src. 31 procflags, skipping spectral fitting
[Wed May  2 23:29:15 2012] Source 31 has fewer than 100.000000 counts, skipping spectral fitting