[Mon Apr 30 21:32:49 2012] Detection parameters:
  Position = (317.6, 280.8) = 16 42 39.12 -54 30 48.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.8 +/- 19.5
  Background counts = 52.6
  Rate = 0.004 +/- 0.0005

[Mon Apr 30 21:32:55 2012] Off-axis axis estimate = 1.89'
[Tue May  1 08:34:50 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Tue May  1 08:34:50 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Tue May  1 08:34:50 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.038
[Tue May  1 08:34:50 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.37"
[Tue May  1 12:20:51 2012] fullrun_mos2_xmm0603220201_pi300-10000_cl_pass0_src10.ximg exists
[Tue May  1 12:20:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603220201_pi300-10000_cl_pass0_src10.csv
[Tue May  1 12:20:51 2012] fullrun_mos2_xmm0603220201_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue May  1 12:20:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603220201_pi300-10000_cl_pass0_src10.csv
[Tue May  1 12:20:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603220201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603220201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 12:20:52 2012] fullrun_mos2_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue May  1 12:20:52 2012] fullrun_mos2_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue May  1 12:20:52 2012] Fit fullrun_mos2_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue May  1 12:22:23 2012] Source 11 is offset by 5.486625 and 6.627829 pixels which is larger than
2 X fitted extent = 0.847412 x 0.847412, not incorporating fit results
[Tue May  1 12:22:23 2012] Spatial fit model total counts = 969.016000, observed total counts = 968.000000
[Tue May  1 12:22:23 2012] Offset between fit and detection position for source 11 = 0.434680 pixels
[Tue May  1 12:22:23 2012] Warning, changing simple spatial fit ID from 10 to 57
[Tue May  1 12:22:23 2012] 961.337800 total counts/ 884.656000 bgd. counts: snr = 2.578132
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.434680 pixels
  Position = (317.6, 281.3) = 16 42 39.12 -54 30 46.0
  Extent = 8.1 (5.8-12.6)", rotation angle = 0
  Source counts = 76.7 +/- 31.0
  Background counts = 884.7
  Rate = 0.002 +/- 0.0008
[Tue May  1 12:22:23 2012] Vigneting correction estimate = 1.000000
[Tue May  1 12:22:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 12:22:23 2012] Assessing source extent using major axis lower bound
[Tue May  1 12:22:23 2012] Source does appear to be extended
[Tue May  1 12:22:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 12:22:23 2012] Source is confused with source 59
[Tue May  1 12:22:23 2012] Source is confused with source 55
[Wed May  2 03:48:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  2 03:48:40 2012] Initial guess for spatial extent in simple fitting = 8.08"
[Wed May  2 03:48:40 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.124
[Wed May  2 03:48:40 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 8.08"
[Wed May  2 07:09:18 2012] fullrun_mos2_xmm0603220201_pi300-10000_cl_pass1_src10.ximg exists
[Wed May  2 07:09:18 2012] fullrun_mos2_xmm0603220201_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed May  2 07:09:18 2012] Fit fullrun_mos2_xmm0603220201_pi300-10000_cl_pass1_src10 appears to have run properly
[Wed May  2 07:09:19 2012] fullrun_mos2_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed May  2 07:09:19 2012] fullrun_mos2_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed May  2 07:09:19 2012] Fit fullrun_mos2_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed May  2 07:10:41 2012] Warning, spatial fit 10 centroid is now closest to src. 59
[Wed May  2 07:10:41 2012] Spatial fit model total counts = 971.580000, observed total counts = 968.000000
[Wed May  2 07:10:41 2012] Offset between fit and detection position for source 11 = 0.068207 pixels
[Wed May  2 07:10:41 2012] Warning, changing simple spatial fit ID from 10 to 48
[Wed May  2 07:10:41 2012] 967.172000 total counts/ 897.703000 bgd. counts: snr = 2.318594
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.068207 pixels
  Position = (317.6, 281.3) = 16 42 39.15 -54 30 46.0
  Extent = 7.7 (4.8-12.5)", rotation angle = 0
  Source counts = 69.5 +/- 31.1
  Background counts = 897.7
  Rate = 0.002 +/- 0.0008
[Wed May  2 07:10:41 2012] Vigneting correction estimate = 1.000000
[Wed May  2 07:10:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 07:10:41 2012] Assessing source extent using major axis lower bound
[Wed May  2 07:10:41 2012] Source does appear to be extended
[Wed May  2 07:10:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 21:14:10 2012] XMMSAS src. selection expression = ellipse(27580.136000, 24423.140000, 462.110413, 462.110413, 0.000000, X, Y)
[Wed May  2 21:14:10 2012] Writing source region out to fullrun_mos2_xmm0603220201_pi300-10000_pass1_cl_src11_src.reg
[Wed May  2 21:14:10 2012] Extracting stamp from image fullrun_mos2_xmm0603220201_pi300-10000_cl_sm2.00.img.gz, (291, 255) - (344, 308)
[Wed May  2 21:14:10 2012] XMMSAS bgd. selection expression = annulus(27580.136000, 24423.140000, 770.184022, 1540.368044, X, Y) && !ellipse(29376.589220, 24500.246800, 306.387209, 306.387209, 0.000000, X, Y) && !ellipse(30796.716000, 25829.565200, 2522.704073, 2522.704073, 0.000000, X, Y) && !ellipse(29775.618000, 25688.244000, 1272.696037, 1272.696037, 0.000000, X, Y) && !ellipse(28181.161200, 24484.688600, 1213.848035, 1213.848035, 0.000000, X, Y) && !ellipse(28824.922000, 25185.094000, 1672.160048, 1672.160048, 0.000000, X, Y) && !ellipse(26837.041200, 26430.656600, 956.808028, 956.808028, 0.000000, X, Y) && !ellipse(28313.932770, 25777.362915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25954.158500, 21898.008800, 1201.800035, 1201.800035, 0.000000, X, Y) && !ellipse(27807.462036, 24999.131348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29575.454010, 26032.099701, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 21:14:10 2012] Writing fullrun_mos2_xmm0603220201_pi300-10000_pass1_cl_src11.gif
[Wed May  2 21:19:37 2012] Mean detx,y = (2858.25, -103.88) 
[Wed May  2 21:19:40 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 21:19:57 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 21:19:58 2012] Setting source spectrum file to fullrun_mos2_xmm0603220201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed May  2 21:19:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603220201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed May  2 21:54:03 2012] Not generating rmf since there are only 69 counts
[Wed May  2 21:54:03 2012] rmf not generated due to insufficient counts
[Wed May  2 23:18:43 2012] Updating aperture counts using extracted products
[Wed May  2 23:18:43 2012] Error reading totcts from fullrun_mos2_xmm0603220201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed May  2 23:18:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 23:18:46 2012] Using photon index=1.80, rate=0.00178, arf fullrun_mos2_xmm0603220201_pi300-10000_pass1_cl_src11.arf
[Wed May  2 23:18:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 23:18:46 2012] Updating source flux to 2e-14
[Wed May  2 23:29:15 2012] Flag b found in src. 11 procflags, skipping spectral fitting
[Wed May  2 23:29:15 2012] Flag c found in src. 11 procflags, skipping spectral fitting
[Wed May  2 23:29:15 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting