[Mon Apr 30 21:32:44 2012] Detection parameters:
  Position = (311.9, 300.6) = 16 42 41.98 -54 29 23.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.0 +/- 17.0
  Background counts = 73.7
  Rate = 0.002 +/- 0.0005

[Mon Apr 30 21:32:47 2012] Off-axis axis estimate = 0.99'
[Tue May  1 03:48:19 2012] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting
[Tue May  1 03:48:19 2012] Initial guess for spatial extent in simple fitting = 6.92"
[Tue May  1 03:48:19 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.914
[Tue May  1 03:48:19 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 6.92"
[Tue May  1 08:34:47 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src61.ximg exists
[Tue May  1 08:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src61.csv
[Tue May  1 08:34:47 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src61_1.ximg exists
[Tue May  1 08:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src61.csv
[Tue May  1 08:34:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 08:34:49 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Tue May  1 08:34:49 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Tue May  1 08:34:49 2012] Fit fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Tue May  1 12:22:03 2012] Source 55 is offset by -4.996363 and 0.900718 pixels which is larger than
2 X fitted extent = 2.314952 x 2.314952, not incorporating fit results
[Tue May  1 12:22:03 2012] Vigneting correction estimate = 1.000000
[Tue May  1 12:22:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 12:22:03 2012] Assessing source extent using major
[Tue May  1 12:22:03 2012] Source does appear to be extended
[Tue May  1 12:22:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 12:22:03 2012] Source is confused with source 57
[Tue May  1 21:49:15 2012] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting
[Tue May  1 21:49:15 2012] Initial guess for spatial extent in simple fitting = 6.92"
[Tue May  1 21:49:15 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.914
[Tue May  1 21:49:15 2012] Giving source the simple spatial ID 60 for pass 1, mean size = 6.92"
[Wed May  2 03:48:35 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_src60.ximg exists
[Wed May  2 03:48:35 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_src60_1.ximg exists
[Wed May  2 03:48:35 2012] Fit fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_src60 appears to have run properly
[Wed May  2 03:48:38 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Wed May  2 03:48:38 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Wed May  2 03:48:38 2012] Fit fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src60 appears to have run properly
[Wed May  2 07:10:25 2012] Source 55 is offset by 6.269039 and 6.014522 pixels which is larger than
2 X fitted extent = 0.795775 x 0.795775, not incorporating fit results
[Wed May  2 07:10:25 2012] Vigneting correction estimate = 1.000000
[Wed May  2 07:10:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 07:10:25 2012] Assessing source extent using major
[Wed May  2 07:10:25 2012] Source does appear to be extended
[Wed May  2 07:10:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:48:27 2012] XMMSAS src. selection expression = ellipse(27087.046387, 26107.903442, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  2 17:48:27 2012] Writing source region out to fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src55_src.reg
[Wed May  2 17:48:27 2012] Extracting stamp from image fullrun_mos1_xmm0603220201_pi300-10000_cl_sm2.00.img.gz, (274, 263) - (349, 338)
[Wed May  2 17:48:27 2012] XMMSAS bgd. selection expression = annulus(27087.046387, 26107.903442, 1087.500000, 2175.000000, X, Y) && !ellipse(29359.832720, 24557.030300, 446.842413, 446.842413, 0.000000, X, Y) && !ellipse(28751.326800, 27967.867000, 741.408821, 741.408821, 0.000000, X, Y) && !ellipse(28738.197600, 28480.394000, 269.844808, 269.844808, 0.000000, X, Y) && !ellipse(28421.547800, 28336.646000, 1422.704041, 1422.704041, 0.000000, X, Y) && !ellipse(27546.470020, 26021.286800, 420.864012, 420.864012, 0.000000, X, Y) && !ellipse(28096.331879, 28137.179504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27132.874600, 27238.811400, 331.459210, 331.459210, 0.000000, X, Y) && !ellipse(25630.174960, 26879.235800, 393.939268, 393.939268, 0.000000, X, Y) && !ellipse(30091.281067, 25386.293030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26850.430000, 25359.117200, 1126.360032, 1126.360032, 0.000000, X, Y) && !ellipse(27125.288000, 25237.624000, 1713.208049, 1713.208049, 0.000000, X, Y) && !ellipse(28854.969330, 25189.645630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28320.955322, 24925.406494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27426.580800, 24145.992000, 1182.512034, 1182.512034, 0.000000, X, Y)
[Wed May  2 17:48:27 2012] Writing fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src55.gif
[Wed May  2 18:27:12 2012] Mean detx,y = (-1568.83, -2573.96) 
[Wed May  2 18:27:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 18:27:32 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 18:27:32 2012] Setting source spectrum file to fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Wed May  2 18:27:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Wed May  2 20:33:00 2012] Not generating rmf since there are only 80 counts
[Wed May  2 20:33:00 2012] rmf not generated due to insufficient counts
[Wed May  2 23:18:35 2012] Updating aperture counts using extracted products
[Wed May  2 23:18:35 2012] Error reading totcts from fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Wed May  2 23:18:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 23:18:40 2012] Using photon index=1.80, rate=0.0023, arf fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src55.arf
[Wed May  2 23:18:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 23:18:41 2012] Updating source flux to 2.5e-14
[Wed May  2 23:18:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting