[Mon Apr 30 21:32:42 2012] Detection parameters:
  Position = (422.9, 325.1) = 16 41 46.62 -54 27 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.5 +/- 14.1
  Background counts = 25.9
  Rate = 0.003 +/- 0.0004

[Mon Apr 30 21:32:47 2012] Off-axis axis estimate = 9.23'
[Tue May  1 03:48:19 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Tue May  1 03:48:19 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Tue May  1 03:48:19 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.975
[Tue May  1 03:48:19 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 11.04"
[Tue May  1 08:34:47 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src53.ximg exists
[Tue May  1 08:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src53.csv
[Tue May  1 08:34:47 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src53_1.ximg exists
[Tue May  1 08:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src53.csv
[Tue May  1 08:34:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 08:34:49 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Tue May  1 08:34:49 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Tue May  1 08:34:49 2012] Fit fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Tue May  1 12:22:03 2012] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 10.403418 pixels away
[Tue May  1 12:22:03 2012] Vigneting correction estimate = 1.000000
[Tue May  1 12:22:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 12:22:03 2012] Assessing source extent using major
[Tue May  1 12:22:03 2012] Source does appear to be extended
[Tue May  1 12:22:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 12:22:03 2012] Source is confused with source 45
[Tue May  1 21:49:15 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Tue May  1 21:49:15 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Tue May  1 21:49:15 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.975
[Tue May  1 21:49:15 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 11.04"
[Wed May  2 03:48:35 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_src53.ximg exists
[Wed May  2 03:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_src53.csv
[Wed May  2 03:48:35 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_src53_1.ximg exists
[Wed May  2 03:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_src53.csv
[Wed May  2 03:48:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 03:48:38 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Wed May  2 03:48:38 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Wed May  2 03:48:38 2012] Fit fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Wed May  2 07:10:25 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 20.479443 pixels away
[Wed May  2 07:10:25 2012] Warning, spatial fit 53 centroid is now closest to src. 45
[Wed May  2 07:10:25 2012] Warning: source 74 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 20.266201 pixels away
[Wed May  2 07:10:25 2012] Vigneting correction estimate = 1.000000
[Wed May  2 07:10:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 07:10:25 2012] Assessing source extent using major
[Wed May  2 07:10:25 2012] Source does appear to be extended
[Wed May  2 07:10:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:48:27 2012] XMMSAS src. selection expression = ellipse(36742.041840, 28231.934845, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  2 17:48:27 2012] Writing source region out to fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src37_src.reg
[Wed May  2 17:48:27 2012] Extracting stamp from image fullrun_mos1_xmm0603220201_pi300-10000_cl_sm2.00.img.gz, (385, 288) - (460, 363)
[Wed May  2 17:48:27 2012] XMMSAS bgd. selection expression = annulus(36742.041840, 28231.934845, 1087.500000, 2175.000000, X, Y) && !ellipse(34460.753052, 27355.844208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34076.683400, 27926.864000, 1568.376045, 1568.376045, 0.000000, X, Y) && !ellipse(33626.866000, 25002.391000, 1560.216045, 1560.216045, 0.000000, X, Y) && !ellipse(34441.797200, 29357.320200, 441.401613, 441.401613, 0.000000, X, Y) && !ellipse(37357.768340, 29982.556200, 467.654413, 467.654413, 0.000000, X, Y) && !ellipse(34525.210000, 29363.070800, 1679.992048, 1679.992048, 0.000000, X, Y) && !ellipse(34253.476000, 27717.232000, 1606.288046, 1606.288046, 0.000000, X, Y) && !ellipse(34960.950000, 30559.846000, 425.560012, 425.560012, 0.000000, X, Y) && !ellipse(37644.784000, 28703.456000, 1190.912034, 1190.912034, 0.000000, X, Y) && !ellipse(37942.834595, 30157.980713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40018.756000, 29011.458000, 1465.568042, 1465.568042, 0.000000, X, Y) && !ellipse(40577.972000, 29796.340000, 1790.288052, 1790.288052, 0.000000, X, Y) && !ellipse(37353.567700, 27811.968400, 313.061609, 313.061609, 0.000000, X, Y) && !ellipse(36812.603800, 27687.207800, 317.616809, 317.616809, 0.000000, X, Y) && !ellipse(39845.318400, 28930.874600, 1282.416037, 1282.416037, 0.000000, X, Y) && !ellipse(39485.650000, 26428.510600, 1561.200045, 239.469607, 336.579000, X, Y) && !ellipse(36830.199432, 25567.644806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36403.516000, 25353.462000, 1756.584051, 1756.584051, 0.000000, X, Y)
[Wed May  2 17:48:27 2012] Writing fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src37.gif
[Wed May  2 18:22:25 2012] Mean detx,y = (-3532.64, -12292.77) 
[Wed May  2 18:22:28 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 18:22:51 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 18:22:51 2012] Setting source spectrum file to fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Wed May  2 18:22:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Wed May  2 20:21:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  2 20:21:49 2012] rmf not generated due to insufficient counts
[Wed May  2 23:18:34 2012] Updating aperture counts using extracted products
[Wed May  2 23:18:34 2012] Error reading totcts from fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Wed May  2 23:18:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 23:18:40 2012] Using photon index=1.80, rate=0.00255, arf fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src37.arf
[Wed May  2 23:18:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 23:18:40 2012] Updating source flux to 6.2e-14
[Wed May  2 23:18:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting