[Mon Apr 30 21:32:41 2012] Detection parameters:
  Position = (332.1, 341.1) = 16 42 31.92 -54 26 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.5 +/- 18.2
  Background counts = 58.2
  Rate = 0.006 +/- 0.0007

[Mon Apr 30 21:32:47 2012] Off-axis axis estimate = 3.94'
[Tue May  1 03:48:19 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Tue May  1 03:48:19 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Tue May  1 03:48:19 2012] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.888
[Tue May  1 03:48:19 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.40"
[Tue May  1 08:34:46 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src10.ximg exists
[Tue May  1 08:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src10.csv
[Tue May  1 08:34:46 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue May  1 08:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src10.csv
[Tue May  1 08:34:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 08:34:48 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue May  1 08:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May  1 08:34:48 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue May  1 08:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May  1 08:34:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 12:22:02 2012] Spatial fit model total counts = 393.523000, observed total counts = 648.000000
[Tue May  1 12:22:02 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  1 12:22:02 2012] Source 23 is offset by 2.907989 and 7.672166 pixels which is larger than
2 X fitted extent = 0.975297 x 0.975297, not incorporating fit results
[Tue May  1 12:22:03 2012] Vigneting correction estimate = 1.000000
[Tue May  1 12:22:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 12:22:03 2012] Assessing source extent using major
[Tue May  1 12:22:03 2012] Source does appear to be extended
[Tue May  1 12:22:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 12:22:03 2012] Source is confused with source 24
[Tue May  1 21:49:15 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Tue May  1 21:49:15 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Tue May  1 21:49:15 2012] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.888
[Tue May  1 21:49:15 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 8.40"
[Wed May  2 03:48:34 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_src10.ximg exists
[Wed May  2 03:48:34 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed May  2 03:48:34 2012] Fit fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_src10 appears to have run properly
[Wed May  2 03:48:36 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed May  2 03:48:36 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed May  2 03:48:36 2012] Fit fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed May  2 07:10:24 2012] Warning, spatial fit 10 centroid is now closest to src. 11
[Wed May  2 07:10:24 2012] Source 23 is offset by 2.907989 and 7.633453 pixels which is larger than
2 X fitted extent = 0.975297 x 0.975297, not incorporating fit results
[Wed May  2 07:10:25 2012] Vigneting correction estimate = 1.000000
[Wed May  2 07:10:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 07:10:25 2012] Assessing source extent using major
[Wed May  2 07:10:25 2012] Source does appear to be extended
[Wed May  2 07:10:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:48:25 2012] XMMSAS src. selection expression = ellipse(28844.689056, 29631.026428, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  2 17:48:25 2012] Writing source region out to fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src23_src.reg
[Wed May  2 17:48:25 2012] Extracting stamp from image fullrun_mos1_xmm0603220201_pi300-10000_cl_sm2.00.img.gz, (295, 304) - (370, 379)
[Wed May  2 17:48:25 2012] XMMSAS bgd. selection expression = annulus(28844.689056, 29631.026428, 1087.500000, 2175.000000, X, Y) && !ellipse(28751.326800, 27967.867000, 741.408821, 741.408821, 0.000000, X, Y) && !ellipse(31588.576874, 27871.907562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28738.197600, 28480.394000, 269.844808, 269.844808, 0.000000, X, Y) && !ellipse(31544.309570, 27364.656250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31001.005615, 27528.216675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30827.348114, 28080.165405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28421.547800, 28336.646000, 1422.704041, 1422.704041, 0.000000, X, Y) && !ellipse(29259.606415, 29545.513245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28096.331879, 28137.179504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27132.874600, 27238.811400, 331.459210, 331.459210, 0.000000, X, Y) && !ellipse(29678.227539, 30866.682373, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 17:48:25 2012] Writing fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src23.gif
[Wed May  2 17:53:17 2012] Mean detx,y = (-5080.07, -4416.87) 
[Wed May  2 17:53:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 17:53:47 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 17:53:48 2012] Setting source spectrum file to fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed May  2 17:53:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed May  2 19:00:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  2 19:00:17 2012] rmf not generated due to insufficient counts
[Wed May  2 23:18:32 2012] Updating aperture counts using extracted products
[Wed May  2 23:18:32 2012] Error reading totcts from fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed May  2 23:18:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 23:18:38 2012] Using photon index=1.80, rate=0.00575, arf fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src23.arf
[Wed May  2 23:18:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 23:18:38 2012] Updating source flux to 8.1e-14
[Wed May  2 23:18:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting