[Mon Apr 30 21:32:40 2012] Detection parameters: Position = (436.7, 347.2) = 16 41 39.78 -54 25 56.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 98.2 +/- 14.2 Background counts = 23.2 Rate = 0.002 +/- 0.0004 [Mon Apr 30 21:32:47 2012] Off-axis axis estimate = 10.63' [Tue May 1 03:48:19 2012] Using EEF radius (= 11.74 ")to estimate initial spatial extent for simple fitting [Tue May 1 03:48:19 2012] Initial guess for spatial extent in simple fitting = 11.74" [Tue May 1 03:48:19 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.026 [Tue May 1 03:48:19 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 11.74" [Tue May 1 08:34:47 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src55.ximg exists [Tue May 1 08:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src55.csv [Tue May 1 08:34:47 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src55_1.ximg exists [Tue May 1 08:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src55.csv [Tue May 1 08:34:47 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src55_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 1 08:34:49 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src55.ximg exists [Tue May 1 08:34:49 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists [Tue May 1 08:34:49 2012] Fit fullrun_mos1_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly [Tue May 1 12:22:03 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 12.517819 pixels away [Tue May 1 12:22:03 2012] Vigneting correction estimate = 1.000000 [Tue May 1 12:22:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 1 12:22:03 2012] Assessing source extent using major [Tue May 1 12:22:03 2012] Source does appear to be extended [Tue May 1 12:22:03 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 1 12:22:03 2012] Source is confused with source 21 [Tue May 1 21:49:15 2012] Using EEF radius (= 11.74 ")to estimate initial spatial extent for simple fitting [Tue May 1 21:49:15 2012] Initial guess for spatial extent in simple fitting = 11.74" [Tue May 1 21:49:15 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.026 [Tue May 1 21:49:15 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 11.74" [Wed May 2 03:48:35 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_src55.ximg exists [Wed May 2 03:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_src55.csv [Wed May 2 03:48:35 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_src55_1.ximg exists [Wed May 2 03:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_src55.csv [Wed May 2 03:48:35 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_src55_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 2 03:48:38 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src55.ximg exists [Wed May 2 03:48:38 2012] fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists [Wed May 2 03:48:38 2012] Fit fullrun_mos1_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly [Wed May 2 07:10:25 2012] Source 20 is offset by -9.506637 and 2.012284 pixels which is larger than 2 X fitted extent = 1.711081 x 1.711081, not incorporating fit results [Wed May 2 07:10:25 2012] Source 20 is offset by 5.725547 and 1.661433 pixels which is larger than 2 X fitted extent = 2.533347 x 2.533347, not incorporating fit results [Wed May 2 07:10:25 2012] Vigneting correction estimate = 1.000000 [Wed May 2 07:10:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 2 07:10:25 2012] Assessing source extent using major [Wed May 2 07:10:25 2012] Source does appear to be extended [Wed May 2 07:10:25 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 2 17:48:27 2012] XMMSAS src. selection expression = ellipse(37942.834595, 30157.980713, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 2 17:48:27 2012] Writing source region out to fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src20_src.reg [Wed May 2 17:48:27 2012] Extracting stamp from image fullrun_mos1_xmm0603220201_pi300-10000_cl_sm2.00.img.gz, (399, 310) - (474, 385) [Wed May 2 17:48:27 2012] XMMSAS bgd. selection expression = annulus(37942.834595, 30157.980713, 1087.500000, 2175.000000, X, Y) && !ellipse(37357.768340, 29982.556200, 467.654413, 467.654413, 0.000000, X, Y) && !ellipse(34525.210000, 29363.070800, 1679.992048, 1679.992048, 0.000000, X, Y) && !ellipse(34253.476000, 27717.232000, 1606.288046, 1606.288046, 0.000000, X, Y) && !ellipse(37644.784000, 28703.456000, 1190.912034, 1190.912034, 0.000000, X, Y) && !ellipse(36742.041840, 28231.934845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40018.756000, 29011.458000, 1465.568042, 1465.568042, 0.000000, X, Y) && !ellipse(40577.972000, 29796.340000, 1790.288052, 1790.288052, 0.000000, X, Y) && !ellipse(37353.567700, 27811.968400, 313.061609, 313.061609, 0.000000, X, Y) && !ellipse(40356.256226, 28828.578339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36812.603800, 27687.207800, 317.616809, 317.616809, 0.000000, X, Y) && !ellipse(39845.318400, 28930.874600, 1282.416037, 1282.416037, 0.000000, X, Y) && !ellipse(39485.650000, 26428.510600, 1561.200045, 239.469607, 336.579000, X, Y) [Wed May 2 17:48:27 2012] Writing fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src20.gif [Wed May 2 18:23:25 2012] Mean detx,y = (-5531.40, -13298.21) [Wed May 2 18:23:28 2012] Setting backscal keywords in source and bgd. spectrum [Wed May 2 18:23:48 2012] Binned source spectrum to 10 counts/bin [Wed May 2 18:23:49 2012] Setting source spectrum file to fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src20_src_b10.pi.gz [Wed May 2 18:23:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src20_bgd.pi.gz [Wed May 2 20:22:14 2012] Not generating rmf since there are only 98 counts [Wed May 2 20:22:14 2012] rmf not generated due to insufficient counts [Wed May 2 23:18:34 2012] Updating aperture counts using extracted products [Wed May 2 23:18:35 2012] Error reading totcts from fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src20_src_b10.pi.gz [Wed May 2 23:18:40 2012] Calculating source flux in energy range 0.30-8.00 [Wed May 2 23:18:40 2012] Using photon index=1.80, rate=0.00249, arf fullrun_mos1_xmm0603220201_pi300-10000_pass1_cl_src20.arf [Wed May 2 23:18:40 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 2 23:18:40 2012] Updating source flux to 7e-14 [Wed May 2 23:18:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting