[Sat Jun 15 03:47:19 2013] Detection parameters:
  Position = (229.4, 326.1) = 17 20 52.28 57 55 13.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 707.3 +/- 33.7
  Background counts = 66.3
  Rate = 0.07 +/- 0.003

[Sat Jun 15 03:47:20 2013] Off-axis axis estimate = 5.39'
[Sat Jun 15 03:49:30 2013] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:49:30 2013] Initial guess for spatial extent in simple fitting = 9.13"
[Sat Jun 15 03:49:30 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.111
[Sat Jun 15 03:49:30 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 9.13"
[Sat Jun 15 04:18:40 2013] fullrun_pn_xmm0603190401_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jun 15 04:18:40 2013] fullrun_pn_xmm0603190401_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jun 15 04:18:40 2013] Fit fullrun_pn_xmm0603190401_pi300-10000_cl_pass0_src6 appears to have run properly
[Sat Jun 15 04:18:40 2013] fullrun_pn_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun 15 04:18:40 2013] fullrun_pn_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun 15 04:18:40 2013] Fit fullrun_pn_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Jun 15 04:55:35 2013] Spatial fit model total counts = 605.863000, observed total counts = 568.000000
[Sat Jun 15 04:55:35 2013] Offset between fit and detection position for source 6 = 0.076221 pixels
[Sat Jun 15 04:55:35 2013] 610.118000 total counts/ 259.496000 bgd. counts: snr = 21.765760
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.076221 pixels
  Position = (229.4, 326.1) = 17 20 52.24 57 55 12.4
  Extent = 6.1 (5.4-6.8)" x 4.7 (4.7-4.7)", rotation angle = 92 (75-112) degrees
  Source counts = 350.6 +/- 24.7
  Background counts = 259.5
  Rate = 0.04 +/- 0.003
[Sat Jun 15 04:55:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 04:55:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 04:55:36 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 04:55:36 2013] Source does appear to be extended
[Sat Jun 15 04:55:36 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.15
[Sat Jun 15 04:55:50 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 04:55:50 2013] Initial guess for spatial extent in simple fitting = 5.36"
[Sat Jun 15 04:55:50 2013] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 1.000
[Sat Jun 15 04:55:50 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 5.36"
[Sat Jun 15 05:27:35 2013] fullrun_pn_xmm0603190401_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jun 15 05:27:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603190401_pi300-10000_cl_pass1_src6.csv
[Sat Jun 15 05:27:35 2013] fullrun_pn_xmm0603190401_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jun 15 05:27:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603190401_pi300-10000_cl_pass1_src6.csv
[Sat Jun 15 05:27:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603190401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603190401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 05:27:35 2013] fullrun_pn_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jun 15 05:27:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jun 15 05:27:35 2013] fullrun_pn_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jun 15 05:27:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jun 15 05:27:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 06:02:55 2013] Warning, spatial fit 6 centroid is now closest to src. 15
[Sat Jun 15 06:02:55 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 06:02:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 06:02:55 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 06:02:55 2013] Source does appear to be extended
[Sat Jun 15 06:02:55 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.15
[Sat Jun 15 06:03:07 2013] XMMSAS src. selection expression = ellipse(19911.332600, 28323.304600, 363.157210, 280.189208, 91.507150, X, Y)
[Sat Jun 15 06:03:07 2013] Writing source region out to fullrun_pn_xmm0603190401_pi300-10000_pass1_cl_src6_src.reg
[Sat Jun 15 06:03:07 2013] Extracting stamp from image fullrun_pn_xmm0603190401_pi300-10000_cl_sm2.00.img.gz, (209, 305) - (250, 347)
[Sat Jun 15 06:03:07 2013] XMMSAS bgd. selection expression = annulus(19911.332600, 28323.304600, 605.262017, 1210.524035, X, Y) && !ellipse(21414.424200, 27712.721200, 393.347211, 214.595206, 65.228078, X, Y) && !ellipse(17940.879333, 26335.487244, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 06:03:07 2013] Writing fullrun_pn_xmm0603190401_pi300-10000_pass1_cl_src6.gif
[Sat Jun 15 06:09:59 2013] Mean detx,y = (-5603.30, -3128.32) 
[Sat Jun 15 06:10:01 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 06:10:13 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 06:10:14 2013] Setting source spectrum file to fullrun_pn_xmm0603190401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun 15 06:10:14 2013] Setting bgd. spectrum file to fullrun_pn_xmm0603190401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jun 15 07:02:51 2013] Updating aperture counts using extracted products
[Sat Jun 15 07:02:51 2013] Total counts from fullrun_pn_xmm0603190401_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 391.00
[Sat Jun 15 07:02:51 2013] Total counts from fullrun_pn_xmm0603190401_pi300-10000_pass1_cl_src6_bgd.pi.gz = 320.00
[Sat Jun 15 07:02:51 2013] Got source and background scale factors 323200.000000, 3034946.000000
[Sat Jun 15 07:02:51 2013] User source parameters:
  Position = (229.4, 326.1) = 17 20 52.24 57 55 12.4
  Extent = 6.1 (5.4-6.8)" x 4.7 (4.7-4.7)", rotation angle = 92 (75-112) degrees
  Source aperture counts = 356.9 +/- 20.8
  Background aperture counts = 34.1
  Rate = 0.04 +/- 0.002

[Sat Jun 15 07:02:56 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 07:02:56 2013] Using photon index=1.80, rate=0.0368, arf fullrun_pn_xmm0603190401_pi300-10000_pass1_cl_src6.arf
[Sat Jun 15 07:02:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 07:02:56 2013] Updating source flux to 1.8e-13
[Sat Jun 15 07:03:12 2013] xmm0603190401/analysis//spectral/fullrun_pn_xmm0603190401_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete