[Sat Jun 15 03:47:19 2013] Detection parameters:
  Position = (229.3, 143.2) = 17 20 52.10 57 41 58.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 228.4 +/- 21.9
  Background counts = 47.6
  Rate = 0.01 +/- 0.001

[Sat Jun 15 03:47:20 2013] Off-axis axis estimate = 12.32'
[Sat Jun 15 03:49:30 2013] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:49:30 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 03:49:30 2013] Initial guess for spatial extent in simple fitting = 12.59"
[Sat Jun 15 03:49:30 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.063
[Sat Jun 15 03:49:30 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 12.59"
[Sat Jun 15 04:18:40 2013] fullrun_pn_xmm0603190401_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 15 04:18:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603190401_pi300-10000_cl_pass0_src5.csv
[Sat Jun 15 04:18:40 2013] fullrun_pn_xmm0603190401_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 15 04:18:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603190401_pi300-10000_cl_pass0_src5.csv
[Sat Jun 15 04:18:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603190401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603190401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 04:18:40 2013] fullrun_pn_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 15 04:18:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun 15 04:18:40 2013] fullrun_pn_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 15 04:18:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun 15 04:18:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 04:55:35 2013] Warning, spatial fit 5 centroid is now closest to src. 22
[Sat Jun 15 04:55:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 04:55:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 04:55:35 2013] Assessing source extent using major
[Sat Jun 15 04:55:35 2013] Source does appear to be extended
[Sat Jun 15 04:55:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 04:55:50 2013] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 04:55:50 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 04:55:50 2013] Initial guess for spatial extent in simple fitting = 12.59"
[Sat Jun 15 04:55:50 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.063
[Sat Jun 15 04:55:50 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 12.59"
[Sat Jun 15 05:27:35 2013] fullrun_pn_xmm0603190401_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun 15 05:27:35 2013] fullrun_pn_xmm0603190401_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun 15 05:27:35 2013] Fit fullrun_pn_xmm0603190401_pi300-10000_cl_pass1_src5 appears to have run properly
[Sat Jun 15 05:27:35 2013] fullrun_pn_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun 15 05:27:35 2013] fullrun_pn_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun 15 05:27:35 2013] Fit fullrun_pn_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jun 15 06:02:55 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.629680 pixels away
[Sat Jun 15 06:02:55 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 06:02:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 06:02:55 2013] Assessing source extent using major
[Sat Jun 15 06:02:55 2013] Source does appear to be extended
[Sat Jun 15 06:02:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 06:03:07 2013] XMMSAS src. selection expression = ellipse(19896.374786, 12409.668747, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 06:03:07 2013] Writing source region out to fullrun_pn_xmm0603190401_pi300-10000_pass1_cl_src5_src.reg
[Sat Jun 15 06:03:07 2013] Extracting stamp from image fullrun_pn_xmm0603190401_pi300-10000_cl_sm2.00.img.gz, (192, 106) - (267, 181)
[Sat Jun 15 06:03:07 2013] XMMSAS bgd. selection expression = annulus(19896.374786, 12409.668747, 1087.500000, 2175.000000, X, Y) && !ellipse(17895.203537, 11303.657883, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 06:03:07 2013] Writing fullrun_pn_xmm0603190401_pi300-10000_pass1_cl_src5.gif
[Sat Jun 15 06:09:16 2013] Mean detx,y = (-11975.97, 11449.21) 
[Sat Jun 15 06:09:19 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 06:09:51 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 06:09:51 2013] Setting source spectrum file to fullrun_pn_xmm0603190401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun 15 06:09:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0603190401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jun 15 06:21:51 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 06:21:51 2013] rmf not generated due to insufficient counts
[Sat Jun 15 07:02:51 2013] Updating aperture counts using extracted products
[Sat Jun 15 07:02:51 2013] Total counts from fullrun_pn_xmm0603190401_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 261.00
[Sat Jun 15 07:02:51 2013] Total counts from fullrun_pn_xmm0603190401_pi300-10000_pass1_cl_src5_bgd.pi.gz = 760.00
[Sat Jun 15 07:02:51 2013] Got source and background scale factors 1337600.000000, 9276255.000000
[Sat Jun 15 07:02:51 2013] User source parameters:
  Position = (229.3, 143.2) = 17 20 52.10 57 41 58.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 151.4 +/- 17.2
  Background aperture counts = 109.6
  Rate = 0.02 +/- 0.002

[Sat Jun 15 07:02:51 2013] Updating counts from extracted products
[Sat Jun 15 07:02:51 2013] Set source signif. to 151.41/10.47 = 14.46
[Sat Jun 15 07:02:56 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 07:02:56 2013] Using photon index=1.80, rate=0.0159, arf fullrun_pn_xmm0603190401_pi300-10000_pass1_cl_src5.arf
[Sat Jun 15 07:02:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 07:02:56 2013] Updating source flux to 1.3e-13
[Sat Jun 15 07:03:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 07:03:12 2013] xmm0603190401/analysis//spectral/fullrun_pn_xmm0603190401_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete