[Sat Jun 15 03:47:38 2013] Detection parameters:
  Position = (263.9, 509.2) = 17 20 33.55 58 8 30.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 481.7 +/- 26.1
  Background counts = 17.1
  Rate = 0.03 +/- 0.002

[Sat Jun 15 03:47:39 2013] Off-axis axis estimate = 15.49'
[Sat Jun 15 04:18:41 2013] Using EEF radius (= 14.17 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 04:18:41 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 04:18:41 2013] Initial guess for spatial extent in simple fitting = 14.17"
[Sat Jun 15 04:18:41 2013] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.133
[Sat Jun 15 04:18:41 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 14.17"
[Sat Jun 15 04:35:41 2013] fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun 15 04:35:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_src3.csv
[Sat Jun 15 04:35:41 2013] fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun 15 04:35:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_src3.csv
[Sat Jun 15 04:35:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 04:35:41 2013] fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun 15 04:35:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun 15 04:35:41 2013] fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun 15 04:35:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun 15 04:35:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 04:55:38 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.808191 pixels away
[Sat Jun 15 04:55:38 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 04:55:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 04:55:38 2013] Assessing source extent using major
[Sat Jun 15 04:55:38 2013] Source does appear to be extended
[Sat Jun 15 04:55:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 05:27:35 2013] Using EEF radius (= 14.17 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 05:27:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 05:27:35 2013] Initial guess for spatial extent in simple fitting = 14.17"
[Sat Jun 15 05:27:35 2013] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.133
[Sat Jun 15 05:27:35 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 14.17"
[Sat Jun 15 05:46:04 2013] fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jun 15 05:46:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_src3.csv
[Sat Jun 15 05:46:04 2013] fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jun 15 05:46:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_src3.csv
[Sat Jun 15 05:46:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 05:46:04 2013] fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun 15 05:46:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Jun 15 05:46:04 2013] fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun 15 05:46:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Jun 15 05:46:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 06:02:57 2013] Spatial fit model total counts = 548.499000, observed total counts = 469.000000
[Sat Jun 15 06:02:57 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 06:02:57 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 06:02:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 06:02:57 2013] Assessing source extent using major
[Sat Jun 15 06:02:57 2013] Source does appear to be extended
[Sat Jun 15 06:02:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 06:28:05 2013] XMMSAS src. selection expression = ellipse(22907.555023, 44255.187988, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 06:28:05 2013] Writing source region out to fullrun_mos1_xmm0603190401_pi300-10000_pass1_cl_src4_src.reg
[Sat Jun 15 06:28:05 2013] Extracting stamp from image fullrun_mos1_xmm0603190401_pi300-10000_cl_sm2.00.img.gz, (226, 472) - (301, 547)
[Sat Jun 15 06:28:05 2013] XMMSAS bgd. selection expression = annulus(22907.555023, 44255.187988, 1087.500000, 2175.000000, X, Y)
[Sat Jun 15 06:28:05 2013] Writing fullrun_mos1_xmm0603190401_pi300-10000_pass1_cl_src4.gif
[Sat Jun 15 06:30:38 2013] Mean detx,y = (16597.69, 3102.15) 
[Sat Jun 15 06:30:39 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 06:30:55 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 06:30:55 2013] Setting source spectrum file to fullrun_mos1_xmm0603190401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun 15 06:30:55 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0603190401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jun 15 06:34:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 06:34:28 2013] rmf not generated due to insufficient counts
[Sat Jun 15 07:02:57 2013] Updating aperture counts using extracted products
[Sat Jun 15 07:02:57 2013] Total counts from fullrun_mos1_xmm0603190401_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 407.00
[Sat Jun 15 07:02:57 2013] Total counts from fullrun_mos1_xmm0603190401_pi300-10000_pass1_cl_src4_bgd.pi.gz = 287.00
[Sat Jun 15 07:02:57 2013] Got source and background scale factors 979234.000000, 5780170.000000
[Sat Jun 15 07:02:57 2013] User source parameters:
  Position = (263.9, 509.2) = 17 20 33.55 58 8 30.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 358.4 +/- 21.2
  Background aperture counts = 48.6
  Rate = 0.02 +/- 0.001

[Sat Jun 15 07:02:57 2013] Updating counts from extracted products
[Sat Jun 15 07:02:57 2013] Set source signif. to 358.38/6.97 = 51.40
[Sat Jun 15 07:02:59 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 07:02:59 2013] Using photon index=1.80, rate=0.0249, arf fullrun_mos1_xmm0603190401_pi300-10000_pass1_cl_src4.arf
[Sat Jun 15 07:02:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 07:02:59 2013] Updating source flux to 7.6e-13
[Sat Jun 15 07:03:03 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 07:03:06 2013] xmm0603190401/analysis//spectral/fullrun_mos1_xmm0603190401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete