[Sat Jun 15 03:47:38 2013] Detection parameters:
  Position = (285.1, 370.2) = 17 20 21.83 57 58 25.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2532.2 +/- 60.6
  Background counts = 24.6
  Rate = 0.2 +/- 0.004

[Sat Jun 15 03:47:39 2013] Off-axis axis estimate = 5.29'
[Sat Jun 15 04:18:41 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 04:18:41 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Sat Jun 15 04:18:41 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.935
[Sat Jun 15 04:18:41 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.07"
[Sat Jun 15 04:35:41 2013] fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 15 04:35:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_src1.csv
[Sat Jun 15 04:35:41 2013] fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 15 04:35:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_src1.csv
[Sat Jun 15 04:35:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 04:35:41 2013] fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 15 04:35:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 15 04:35:41 2013] fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 15 04:35:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 15 04:35:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603190401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 04:55:38 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.606820 pixels away
[Sat Jun 15 04:55:38 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 04:55:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 04:55:38 2013] Assessing source extent using major
[Sat Jun 15 04:55:38 2013] Source does appear to be extended
[Sat Jun 15 04:55:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 05:27:35 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 05:27:35 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Sat Jun 15 05:27:35 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.935
[Sat Jun 15 05:27:35 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.07"
[Sat Jun 15 05:46:04 2013] fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 15 05:46:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_src1.csv
[Sat Jun 15 05:46:04 2013] fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 15 05:46:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_src1.csv
[Sat Jun 15 05:46:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 05:46:04 2013] fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 15 05:46:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 15 05:46:04 2013] fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 15 05:46:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 15 05:46:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603190401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 06:02:57 2013] Source 1 is offset by -0.985253 and -8.678522 pixels which is larger than
2 X fitted extent = 1.042878 x 1.042878, not incorporating fit results
[Sat Jun 15 06:02:57 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 06:02:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 06:02:57 2013] Assessing source extent using major
[Sat Jun 15 06:02:57 2013] Source does appear to be extended
[Sat Jun 15 06:02:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 06:28:05 2013] Counts = 2532.221436, rescaling region sizes by 2.000000
[Sat Jun 15 06:28:05 2013] XMMSAS src. selection expression = ellipse(24758.312225, 32155.810608, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jun 15 06:28:05 2013] Writing source region out to fullrun_mos1_xmm0603190401_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 15 06:28:05 2013] Extracting stamp from image fullrun_mos1_xmm0603190401_pi300-10000_cl_sm2.00.img.gz, (210, 295) - (360, 445)
[Sat Jun 15 06:28:05 2013] XMMSAS bgd. selection expression = annulus(24758.312225, 32155.810608, 4350.000000, 8700.000000, X, Y) && !ellipse(22270.451538, 36685.303864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32311.140420, 32646.690280, 458.635213, 458.635213, 0.000000, X, Y) && !ellipse(19899.905975, 28322.373108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25377.915200, 23374.614600, 414.811212, 414.811212, 0.000000, X, Y) && !ellipse(29173.660560, 33838.697200, 334.373836, 334.373836, 0.000000, X, Y) && !ellipse(17877.494700, 26388.156400, 998.520029, 323.726409, 54.468300, X, Y) && !ellipse(21378.073624, 27690.677917, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 06:28:05 2013] Writing fullrun_mos1_xmm0603190401_pi300-10000_pass1_cl_src1.gif
[Sat Jun 15 06:28:08 2013] Mean detx,y = (4803.43, 43.81) 
[Sat Jun 15 06:28:09 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 06:30:24 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 06:30:24 2013] Setting source spectrum file to fullrun_mos1_xmm0603190401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 15 06:30:24 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0603190401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 15 06:34:15 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 06:34:15 2013] rmf not generated due to insufficient counts
[Sat Jun 15 07:02:57 2013] Updating aperture counts using extracted products
[Sat Jun 15 07:02:57 2013] Total counts from fullrun_mos1_xmm0603190401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 2494.00
[Sat Jun 15 07:02:57 2013] Total counts from fullrun_mos1_xmm0603190401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 8661.00
[Sat Jun 15 07:02:57 2013] Got source and background scale factors 4950456.000000, 157546271.000000
[Sat Jun 15 07:02:57 2013] User source parameters:
  Position = (285.1, 370.2) = 17 20 21.83 57 58 25.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2221.9 +/- 50.9
  Background aperture counts = 272.1
  Rate = 0.2 +/- 0.004

[Sat Jun 15 07:02:57 2013] Updating counts from extracted products
[Sat Jun 15 07:02:57 2013] Set source signif. to 2221.85/16.50 = 134.68
[Sat Jun 15 07:02:59 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 07:02:59 2013] Using photon index=1.80, rate=0.154, arf fullrun_mos1_xmm0603190401_pi300-10000_pass1_cl_src1.arf
[Sat Jun 15 07:02:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 07:02:59 2013] Updating source flux to 1.6e-12
[Sat Jun 15 07:03:03 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 07:03:06 2013] xmm0603190401/analysis//spectral/fullrun_mos1_xmm0603190401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete