[Wed Jul  4 10:14:00 2012] Detection parameters:
  Position = (224.1, 325.8) = 17 20 52.45 57 55 12.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.6 +/- 18.0
  Background counts = 7.7
  Rate = 0.02 +/- 0.001

[Wed Jul  4 10:14:00 2012] Off-axis axis estimate = 5.75'
[Wed Jul  4 11:16:31 2012] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 11:16:31 2012] Initial guess for spatial extent in simple fitting = 9.30"
[Wed Jul  4 11:16:31 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.078
[Wed Jul  4 11:16:31 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.30"
[Wed Jul  4 11:39:06 2012] fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jul  4 11:39:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_src5.csv
[Wed Jul  4 11:39:06 2012] fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jul  4 11:39:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_src5.csv
[Wed Jul  4 11:39:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 11:39:06 2012] fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jul  4 11:39:06 2012] fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jul  4 11:39:06 2012] Fit fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jul  4 11:39:20 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.925036 pixels away
[Wed Jul  4 11:39:20 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 11:39:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 11:39:20 2012] Assessing source extent using major
[Wed Jul  4 11:39:20 2012] Source does appear to be extended
[Wed Jul  4 11:39:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 12:34:36 2012] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 12:34:36 2012] Initial guess for spatial extent in simple fitting = 9.30"
[Wed Jul  4 12:34:36 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.078
[Wed Jul  4 12:34:36 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.30"
[Wed Jul  4 12:55:10 2012] fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_src5.ximg exists
[Wed Jul  4 12:55:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_src5.csv
[Wed Jul  4 12:55:10 2012] fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Jul  4 12:55:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_src5.csv
[Wed Jul  4 12:55:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 12:55:10 2012] fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Jul  4 12:55:10 2012] fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jul  4 12:55:10 2012] Fit fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Jul  4 12:55:20 2012] Spatial fit model total counts = 276.169000, observed total counts = 277.000000
[Wed Jul  4 12:55:20 2012] Offset between fit and detection position for source 6 = 0.197425 pixels
[Wed Jul  4 12:55:20 2012] 281.111000 total counts/ 139.947000 bgd. counts: snr = 11.932794
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.197425 pixels
  Position = (224.0, 325.6) = 17 20 52.50 57 55 11.7
  Extent = 4.9 (4.2-5.9)", rotation angle = 0
  Source counts = 141.2 +/- 16.8
  Background counts = 139.9
  Rate = 0.007 +/- 0.0009
[Wed Jul  4 12:55:20 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 12:55:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 12:55:20 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 12:55:20 2012] Source does appear to be extended
[Wed Jul  4 12:55:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 13:51:39 2012] XMMSAS src. selection expression = ellipse(19437.873340, 28280.851200, 292.884608, 292.884608, 0.000000, X, Y)
[Wed Jul  4 13:51:39 2012] Writing source region out to fullrun_mos2_xmm0603190201_pi300-10000_pass1_cl_src6_src.reg
[Wed Jul  4 13:51:39 2012] Extracting stamp from image fullrun_mos2_xmm0603190201_pi300-10000_cl_sm2.00.img.gz, (207, 309) - (241, 342)
[Wed Jul  4 13:51:39 2012] XMMSAS bgd. selection expression = annulus(19437.873340, 28280.851200, 488.141014, 976.282028, X, Y) && !ellipse(20924.455231, 27692.501923, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul  4 13:51:39 2012] Writing fullrun_mos2_xmm0603190201_pi300-10000_pass1_cl_src6.gif
[Wed Jul  4 13:54:37 2012] Mean detx,y = (5007.23, 4110.08) 
[Wed Jul  4 13:54:38 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 13:54:45 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 13:54:45 2012] Setting source spectrum file to fullrun_mos2_xmm0603190201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jul  4 13:54:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603190201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Jul  4 14:06:33 2012] Updating aperture counts using extracted products
[Wed Jul  4 14:06:33 2012] Error reading totcts from fullrun_mos2_xmm0603190201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jul  4 14:06:33 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 14:06:33 2012] Using photon index=1.80, rate=0.00719, arf fullrun_mos2_xmm0603190201_pi300-10000_pass1_cl_src6.arf
[Wed Jul  4 14:06:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 14:06:33 2012] Updating source flux to 1.2e-13