[Wed Jul  4 10:14:00 2012] Detection parameters:
  Position = (259.5, 509.1) = 17 20 33.24 58 8 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 422.3 +/- 24.0
  Background counts = 7.1
  Rate = 0.02 +/- 0.001

[Wed Jul  4 10:14:00 2012] Off-axis axis estimate = 15.53'
[Wed Jul  4 11:16:31 2012] Using EEF radius (= 14.19 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 11:16:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul  4 11:16:31 2012] Initial guess for spatial extent in simple fitting = 14.19"
[Wed Jul  4 11:16:31 2012] source mask rpix=3.3, npix_max = 56, mask sum = 52, frac = 0.918
[Wed Jul  4 11:16:31 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 14.19"
[Wed Jul  4 11:39:06 2012] fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jul  4 11:39:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_src4.csv
[Wed Jul  4 11:39:06 2012] fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jul  4 11:39:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_src4.csv
[Wed Jul  4 11:39:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 11:39:06 2012] fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jul  4 11:39:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jul  4 11:39:06 2012] fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jul  4 11:39:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jul  4 11:39:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603190201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 11:39:20 2012] Spatial fit model total counts = 584.724000, observed total counts = 439.000000
[Wed Jul  4 11:39:20 2012] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul  4 11:39:20 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 11:39:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 11:39:20 2012] Assessing source extent using major
[Wed Jul  4 11:39:20 2012] Source does appear to be extended
[Wed Jul  4 11:39:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 12:34:36 2012] Using EEF radius (= 14.19 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 12:34:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul  4 12:34:36 2012] Initial guess for spatial extent in simple fitting = 14.19"
[Wed Jul  4 12:34:36 2012] source mask rpix=3.3, npix_max = 56, mask sum = 52, frac = 0.918
[Wed Jul  4 12:34:36 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 14.19"
[Wed Jul  4 12:55:10 2012] fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jul  4 12:55:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_src4.csv
[Wed Jul  4 12:55:10 2012] fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jul  4 12:55:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_src4.csv
[Wed Jul  4 12:55:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 12:55:10 2012] fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jul  4 12:55:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jul  4 12:55:10 2012] fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jul  4 12:55:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jul  4 12:55:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603190201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 12:55:20 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 15.608206 pixels away
[Wed Jul  4 12:55:20 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 12:55:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 12:55:20 2012] Assessing source extent using major
[Wed Jul  4 12:55:20 2012] Source does appear to be extended
[Wed Jul  4 12:55:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 13:51:39 2012] XMMSAS src. selection expression = ellipse(22526.136169, 44239.300293, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul  4 13:51:39 2012] Writing source region out to fullrun_mos2_xmm0603190201_pi300-10000_pass1_cl_src11_src.reg
[Wed Jul  4 13:51:39 2012] Extracting stamp from image fullrun_mos2_xmm0603190201_pi300-10000_cl_sm2.00.img.gz, (222, 472) - (297, 547)
[Wed Jul  4 13:51:39 2012] XMMSAS bgd. selection expression = annulus(22526.136169, 44239.300293, 1087.500000, 2175.000000, X, Y)
[Wed Jul  4 13:51:39 2012] Writing fullrun_mos2_xmm0603190201_pi300-10000_pass1_cl_src11.gif
[Wed Jul  4 13:54:14 2012] Mean detx,y = (-6874.48, 15145.04) 
[Wed Jul  4 13:54:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 13:54:35 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 13:54:35 2012] Setting source spectrum file to fullrun_mos2_xmm0603190201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Jul  4 13:54:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603190201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Jul  4 14:01:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul  4 14:01:13 2012] rmf not generated due to insufficient counts
[Wed Jul  4 14:06:33 2012] Updating aperture counts using extracted products
[Wed Jul  4 14:06:33 2012] Error reading totcts from fullrun_mos2_xmm0603190201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Jul  4 14:06:33 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 14:06:33 2012] Using photon index=1.80, rate=0.0215, arf fullrun_mos2_xmm0603190201_pi300-10000_pass1_cl_src11.arf
[Wed Jul  4 14:06:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 14:06:33 2012] Updating source flux to 8.2e-13
[Wed Jul  4 14:07:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting