[Wed Jul  4 10:13:39 2012] Detection parameters:
  Position = (251.8, 238.0) = 17 20 37.25 57 48 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.1 +/- 11.4
  Background counts = 7.4
  Rate = 0.006 +/- 0.0009

[Wed Jul  4 10:13:39 2012] Off-axis axis estimate = 5.54'
[Wed Jul  4 10:55:15 2012] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 10:55:15 2012] Initial guess for spatial extent in simple fitting = 9.20"
[Wed Jul  4 10:55:15 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.097
[Wed Jul  4 10:55:15 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.20"
[Wed Jul  4 11:16:31 2012] fullrun_mos1_xmm0603190201_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jul  4 11:16:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190201_pi300-10000_cl_pass0_src5.csv
[Wed Jul  4 11:16:31 2012] fullrun_mos1_xmm0603190201_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jul  4 11:16:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190201_pi300-10000_cl_pass0_src5.csv
[Wed Jul  4 11:16:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603190201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603190201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 11:16:31 2012] fullrun_mos1_xmm0603190201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jul  4 11:16:31 2012] fullrun_mos1_xmm0603190201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jul  4 11:16:31 2012] Fit fullrun_mos1_xmm0603190201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jul  4 11:39:17 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 12.557896 pixels away
[Wed Jul  4 11:39:17 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 11:39:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 11:39:17 2012] Assessing source extent using major
[Wed Jul  4 11:39:17 2012] Source does appear to be extended
[Wed Jul  4 11:39:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 12:17:57 2012] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 12:17:57 2012] Initial guess for spatial extent in simple fitting = 9.20"
[Wed Jul  4 12:17:57 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.097
[Wed Jul  4 12:17:57 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.20"
[Wed Jul  4 12:34:35 2012] fullrun_mos1_xmm0603190201_pi300-10000_cl_pass1_src5.ximg exists
[Wed Jul  4 12:34:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190201_pi300-10000_cl_pass1_src5.csv
[Wed Jul  4 12:34:35 2012] fullrun_mos1_xmm0603190201_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Jul  4 12:34:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190201_pi300-10000_cl_pass1_src5.csv
[Wed Jul  4 12:34:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603190201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603190201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 12:34:36 2012] fullrun_mos1_xmm0603190201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Jul  4 12:34:36 2012] fullrun_mos1_xmm0603190201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jul  4 12:34:36 2012] Fit fullrun_mos1_xmm0603190201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Jul  4 12:55:17 2012] Spatial fit model total counts = 149.233000, observed total counts = 151.000000
[Wed Jul  4 12:55:17 2012] Offset between fit and detection position for source 14 = 0.134015 pixels
[Wed Jul  4 12:55:17 2012] 146.436200 total counts/ 91.779400 bgd. counts: snr = 5.705209
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.134015 pixels
  Position = (251.6, 238.0) = 17 20 37.32 57 48 50.8
  Extent = 5.9 (4.5-7.9)", rotation angle = 0
  Source counts = 54.7 +/- 12.1
  Background counts = 91.8
  Rate = 0.003 +/- 0.0006
[Wed Jul  4 12:55:17 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 12:55:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 12:55:17 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 12:55:17 2012] Source does appear to be extended
[Wed Jul  4 12:55:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 13:36:51 2012] XMMSAS src. selection expression = ellipse(21844.090600, 20658.675600, 353.782210, 353.782210, 0.000000, X, Y)
[Wed Jul  4 13:36:51 2012] Writing source region out to fullrun_mos1_xmm0603190201_pi300-10000_pass1_cl_src14_src.reg
[Wed Jul  4 13:36:51 2012] Extracting stamp from image fullrun_mos1_xmm0603190201_pi300-10000_cl_sm2.00.img.gz, (231, 218) - (272, 258)
[Wed Jul  4 13:36:51 2012] XMMSAS bgd. selection expression = annulus(21844.090600, 20658.675600, 589.637017, 1179.274034, X, Y)
[Wed Jul  4 13:36:51 2012] Writing fullrun_mos1_xmm0603190201_pi300-10000_pass1_cl_src14.gif
[Wed Jul  4 13:38:05 2012] Mean detx,y = (-3198.73, -7770.48) 
[Wed Jul  4 13:38:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 13:38:12 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 13:38:12 2012] Setting source spectrum file to fullrun_mos1_xmm0603190201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Jul  4 13:38:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603190201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Jul  4 13:50:54 2012] Not generating rmf since there are only 54 counts
[Wed Jul  4 13:50:54 2012] rmf not generated due to insufficient counts
[Wed Jul  4 14:06:32 2012] Updating aperture counts using extracted products
[Wed Jul  4 14:06:32 2012] Error reading totcts from fullrun_mos1_xmm0603190201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Jul  4 14:06:33 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 14:06:33 2012] Using photon index=1.80, rate=0.00279, arf fullrun_mos1_xmm0603190201_pi300-10000_pass1_cl_src14.arf
[Wed Jul  4 14:06:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 14:06:33 2012] Updating source flux to 5.1e-14
[Wed Jul  4 14:06:34 2012] Source 14 has fewer than 100.000000 counts, skipping spectral fitting