[Wed Jul  4 10:13:38 2012] Detection parameters:
  Position = (280.0, 370.2) = 17 20 21.92 57 58 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2489.3 +/- 59.5
  Background counts = 8.5
  Rate = 0.2 +/- 0.004

[Wed Jul  4 10:13:39 2012] Off-axis axis estimate = 5.37'
[Wed Jul  4 10:55:15 2012] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 10:55:15 2012] Initial guess for spatial extent in simple fitting = 9.11"
[Wed Jul  4 10:55:15 2012] source mask rpix=2.1, npix_max = 26, mask sum = 27, frac = 1.002
[Wed Jul  4 10:55:15 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.11"
[Wed Jul  4 11:16:31 2012] fullrun_mos1_xmm0603190201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul  4 11:16:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0603190201_pi300-10000_cl_pass0_src1.csv
[Wed Jul  4 11:16:31 2012] fullrun_mos1_xmm0603190201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul  4 11:16:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0603190201_pi300-10000_cl_pass0_src1.csv
[Wed Jul  4 11:16:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603190201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603190201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 11:16:31 2012] fullrun_mos1_xmm0603190201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul  4 11:16:31 2012] fullrun_mos1_xmm0603190201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul  4 11:16:31 2012] Fit fullrun_mos1_xmm0603190201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul  4 11:39:17 2012] Spatial fit model total counts = 2458.590000, observed total counts = 2323.000000
[Wed Jul  4 11:39:17 2012] Offset between fit and detection position for source 1 = 0.334142 pixels
[Wed Jul  4 11:39:17 2012] 2463.147000 total counts/ 554.997000 bgd. counts: snr = 80.996676
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.334142 pixels
  Position = (279.9, 369.9) = 17 20 22.00 57 58 24.5
  Extent = 6.0 (5.8-6.3)", rotation angle = 0
  Source counts = 1908.2 +/- 49.6
  Background counts = 555.0
  Rate = 0.1 +/- 0.003
[Wed Jul  4 11:39:17 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 11:39:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 11:39:17 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 11:39:17 2012] Source does appear to be extended
[Wed Jul  4 11:39:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 12:17:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul  4 12:17:57 2012] Initial guess for spatial extent in simple fitting = 6.04"
[Wed Jul  4 12:17:57 2012] source mask rpix=1.4, npix_max = 14, mask sum = 15, frac = 1.053
[Wed Jul  4 12:17:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.04"
[Wed Jul  4 12:34:35 2012] fullrun_mos1_xmm0603190201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul  4 12:34:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190201_pi300-10000_cl_pass1_src1.csv
[Wed Jul  4 12:34:35 2012] fullrun_mos1_xmm0603190201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul  4 12:34:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603190201_pi300-10000_cl_pass1_src1.csv
[Wed Jul  4 12:34:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603190201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603190201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 12:34:36 2012] fullrun_mos1_xmm0603190201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul  4 12:34:36 2012] fullrun_mos1_xmm0603190201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul  4 12:34:36 2012] Fit fullrun_mos1_xmm0603190201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul  4 12:55:17 2012] Spatial fit model total counts = 2445.440000, observed total counts = 2301.000000
[Wed Jul  4 12:55:17 2012] Offset between fit and detection position for source 1 = 0.014236 pixels
[Wed Jul  4 12:55:17 2012] 2441.436000 total counts/ 564.946000 bgd. counts: snr = 78.948300
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014236 pixels
  Position = (279.9, 369.9) = 17 20 22.00 57 58 24.6
  Extent = 5.9 (5.7-6.2)", rotation angle = 0
  Source counts = 1876.5 +/- 49.4
  Background counts = 564.9
  Rate = 0.1 +/- 0.003
[Wed Jul  4 12:55:17 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 12:55:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 12:55:17 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 12:55:17 2012] Source does appear to be extended
[Wed Jul  4 12:55:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 13:36:51 2012] Counts = 1876.490000, rescaling region sizes by 2.000000
[Wed Jul  4 13:36:51 2012] XMMSAS src. selection expression = ellipse(24299.311120, 32132.092400, 708.706820, 708.706820, 0.000000, X, Y)
[Wed Jul  4 13:36:51 2012] Writing source region out to fullrun_mos1_xmm0603190201_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul  4 13:36:51 2012] Extracting stamp from image fullrun_mos1_xmm0603190201_pi300-10000_cl_sm2.00.img.gz, (239, 329) - (321, 411)
[Wed Jul  4 13:36:51 2012] XMMSAS bgd. selection expression = annulus(24299.311120, 32132.092400, 2362.356068, 4724.712136, X, Y) && !ellipse(21815.639709, 36662.972412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19452.712600, 28296.543800, 472.229614, 472.229614, 0.000000, X, Y) && !ellipse(20921.822180, 27694.739180, 346.381610, 346.381610, 0.000000, X, Y) && !ellipse(26443.548400, 32037.319400, 384.644811, 384.644811, 0.000000, X, Y)
[Wed Jul  4 13:36:51 2012] Writing fullrun_mos1_xmm0603190201_pi300-10000_pass1_cl_src1.gif
[Wed Jul  4 13:36:53 2012] Mean detx,y = (4559.35, 1035.39) 
[Wed Jul  4 13:36:54 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 13:37:26 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 13:37:26 2012] Setting source spectrum file to fullrun_mos1_xmm0603190201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul  4 13:37:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603190201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul  4 14:06:32 2012] Updating aperture counts using extracted products
[Wed Jul  4 14:06:32 2012] Error reading totcts from fullrun_mos1_xmm0603190201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul  4 14:06:33 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 14:06:33 2012] Using photon index=1.80, rate=0.0957, arf fullrun_mos1_xmm0603190201_pi300-10000_pass1_cl_src1.arf
[Wed Jul  4 14:06:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 14:06:33 2012] Updating source flux to 1.1e-12
[Wed Jul  4 14:07:07 2012] Reading fit data from xmm0603190201/analysis//spectral/fullrun_mos1_xmm0603190201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul  4 14:07:07 2012] Spectral fit parameter nH value = 1.21837e+22
[Wed Jul  4 14:07:07 2012] Spectral fit parameter PhoIndex value = 9.972
[Wed Jul  4 14:07:07 2012] Failed to get F(0.3-8.0) from xmm0603190201/analysis//spectral/fullrun_mos1_xmm0603190201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul  4 14:07:07 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 14:07:07 2012] Using Nh = 1.2e+22, photon index=9.97, rate=0.0957, arf fullrun_mos1_xmm0603190201_pi300-10000_pass1_cl_src1.arf
[Wed Jul  4 14:07:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 14:07:07 2012] Updating source flux to 6.2e-13