[Wed Aug  8 10:24:20 2012] Detection parameters:
  Position = (100.7, 250.0) = 17 21 59.06 57 49 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 683.1 +/- 41.3
  Background counts = 20.8
  Rate = 0.04 +/- 0.002

[Wed Aug  8 10:24:21 2012] Off-axis axis estimate = 14.76'
[Wed Aug  8 10:28:01 2012] Using EEF radius (= 13.81 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 10:28:01 2012] Initial guess for spatial extent in simple fitting = 13.81"
[Wed Aug  8 10:28:01 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.907
[Wed Aug  8 10:28:01 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.81"
[Wed Aug  8 11:43:57 2012] fullrun_pn_xmm0603190101_pi300-10000_cl_pass0_src11.ximg exists
[Wed Aug  8 11:43:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603190101_pi300-10000_cl_pass0_src11.csv
[Wed Aug  8 11:43:57 2012] fullrun_pn_xmm0603190101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Aug  8 11:43:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603190101_pi300-10000_cl_pass0_src11.csv
[Wed Aug  8 11:43:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603190101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603190101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 11:43:58 2012] fullrun_pn_xmm0603190101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Aug  8 11:43:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603190101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Aug  8 11:43:58 2012] fullrun_pn_xmm0603190101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Aug  8 11:43:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603190101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Aug  8 11:43:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603190101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603190101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 12:47:12 2012] Warning, spatial fit 11 centroid is now closest to src. 1
[Wed Aug  8 12:47:12 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 12:47:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 12:47:12 2012] Assessing source extent using major
[Wed Aug  8 12:47:12 2012] Source does appear to be extended
[Wed Aug  8 12:47:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 12:47:12 2012] Source is confused with source 1
[Wed Aug  8 12:47:36 2012] Using EEF radius (= 13.81 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 12:47:36 2012] Initial guess for spatial extent in simple fitting = 13.81"
[Wed Aug  8 12:47:36 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.907
[Wed Aug  8 12:47:36 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 13.81"
[Wed Aug  8 14:19:25 2012] fullrun_pn_xmm0603190101_pi300-10000_cl_pass1_src11.ximg exists
[Wed Aug  8 14:19:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603190101_pi300-10000_cl_pass1_src11.csv
[Wed Aug  8 14:19:25 2012] fullrun_pn_xmm0603190101_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Aug  8 14:19:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603190101_pi300-10000_cl_pass1_src11.csv
[Wed Aug  8 14:19:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603190101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603190101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 14:19:26 2012] fullrun_pn_xmm0603190101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Aug  8 14:19:26 2012] fullrun_pn_xmm0603190101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Aug  8 14:19:26 2012] Fit fullrun_pn_xmm0603190101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Aug  8 15:15:05 2012] Spatial fit model total counts = 2128.890000, observed total counts = 2027.000000
[Wed Aug  8 15:15:05 2012] Offset between fit and detection position for source 12 = 0.464419 pixels
[Wed Aug  8 15:15:05 2012] 1964.706000 total counts/ 1351.770000 bgd. counts: snr = 16.671080
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.464419 pixels
  Position = (100.5, 249.6) = 17 21 59.20 57 49 38.5
  Extent = 6.4 (5.9-6.8)", rotation angle = 0
  Source counts = 612.9 +/- 44.3
  Background counts = 1351.8
  Rate = 0.04 +/- 0.003
[Wed Aug  8 15:15:05 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 15:15:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 15:15:05 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 15:15:05 2012] Source does appear to be extended
[Wed Aug  8 15:15:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 15:15:27 2012] XMMSAS src. selection expression = ellipse(8693.277176, 21664.950000, 381.364211, 381.364211, 0.000000, X, Y)
[Wed Aug  8 15:15:27 2012] Writing source region out to fullrun_pn_xmm0603190101_pi300-10000_pass1_cl_src12_src.reg
[Wed Aug  8 15:15:27 2012] Extracting stamp from image fullrun_pn_xmm0603190101_pi300-10000_cl_sm2.00.img.gz, (79, 228) - (122, 271)
[Wed Aug  8 15:15:27 2012] XMMSAS bgd. selection expression = annulus(8693.277176, 21664.950000, 635.607018, 1271.214037, X, Y) && !ellipse(8821.915710, 21056.022552, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  8 15:15:27 2012] Writing fullrun_pn_xmm0603190101_pi300-10000_pass1_cl_src12.gif
[Wed Aug  8 15:36:57 2012] Mean detx,y = (-17152.06, -5994.80) 
[Wed Aug  8 15:37:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 15:37:21 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 15:37:21 2012] Setting source spectrum file to fullrun_pn_xmm0603190101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Aug  8 15:37:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603190101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed Aug  8 16:52:17 2012] Updating aperture counts using extracted products
[Wed Aug  8 16:52:17 2012] Error reading totcts from fullrun_pn_xmm0603190101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Aug  8 16:52:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 16:52:21 2012] Using photon index=1.80, rate=0.036, arf fullrun_pn_xmm0603190101_pi300-10000_pass1_cl_src12.arf
[Wed Aug  8 16:52:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 16:52:22 2012] Updating source flux to 7.5e-13
[Wed Aug  8 16:53:11 2012] Flag c found in src. 12 procflags, skipping spectral fitting
[Wed Aug  8 16:53:30 2012] Reading fit data from xmm0603190101/analysis//spectral/fullrun_pn_xmm0603190101_pi300-10000_pass1_cl_src12_pl.csv
[Wed Aug  8 16:53:30 2012] Spectral fit parameter nH value = 1.61195e+21
[Wed Aug  8 16:53:30 2012] Spectral fit parameter PhoIndex value = 2.94966
[Wed Aug  8 16:53:30 2012] Failed to get F(0.3-8.0) from xmm0603190101/analysis//spectral/fullrun_pn_xmm0603190101_pi300-10000_pass1_cl_src12_pl.csv, possibly due to different flux energy range selected
[Wed Aug  8 16:53:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 16:53:30 2012] Using Nh = 1.6e+21, photon index=2.95, rate=0.036, arf fullrun_pn_xmm0603190101_pi300-10000_pass1_cl_src12.arf
[Wed Aug  8 16:53:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 16:53:30 2012] Updating source flux to 5.7e-13