[Wed Aug  8 10:25:38 2012] Detection parameters:
  Position = (278.9, 370.1) = 17 20 22.07 57 58 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2514.3 +/- 60.1
  Background counts = 8.1
  Rate = 0.2 +/- 0.004

[Wed Aug  8 10:25:39 2012] Off-axis axis estimate = 5.38'
[Wed Aug  8 12:08:11 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 12:08:11 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Wed Aug  8 12:08:11 2012] source mask rpix=2.1, npix_max = 26, mask sum = 36, frac = 1.335
[Wed Aug  8 12:08:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.12"
[Wed Aug  8 12:47:00 2012] fullrun_mos2_xmm0603190101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug  8 12:47:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603190101_pi300-10000_cl_pass0_src1.csv
[Wed Aug  8 12:47:00 2012] fullrun_mos2_xmm0603190101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug  8 12:47:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603190101_pi300-10000_cl_pass0_src1.csv
[Wed Aug  8 12:47:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603190101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603190101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 12:47:01 2012] fullrun_mos2_xmm0603190101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug  8 12:47:01 2012] fullrun_mos2_xmm0603190101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug  8 12:47:01 2012] Fit fullrun_mos2_xmm0603190101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug  8 12:47:21 2012] Spatial fit model total counts = 2369.100000, observed total counts = 2325.000000
[Wed Aug  8 12:47:21 2012] Offset between fit and detection position for source 1 = 0.150923 pixels
[Wed Aug  8 12:47:21 2012] 2360.426000 total counts/ 519.696000 bgd. counts: snr = 80.744956
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.150923 pixels
  Position = (278.8, 370.1) = 17 20 22.15 57 58 25.6
  Extent = 5.7 (5.5-5.9)", rotation angle = 0
  Source counts = 1840.7 +/- 48.6
  Background counts = 519.7
  Rate = 0.1 +/- 0.003
[Wed Aug  8 12:47:21 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 12:47:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 12:47:21 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 12:47:21 2012] Source does appear to be extended
[Wed Aug  8 12:47:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 14:40:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  8 14:40:52 2012] Initial guess for spatial extent in simple fitting = 5.70"
[Wed Aug  8 14:40:52 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.221
[Wed Aug  8 14:40:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.70"
[Wed Aug  8 15:14:52 2012] fullrun_mos2_xmm0603190101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug  8 15:14:52 2012] fullrun_mos2_xmm0603190101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug  8 15:14:52 2012] Fit fullrun_mos2_xmm0603190101_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Aug  8 15:14:53 2012] fullrun_mos2_xmm0603190101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug  8 15:14:53 2012] fullrun_mos2_xmm0603190101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug  8 15:14:53 2012] Fit fullrun_mos2_xmm0603190101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  8 15:15:14 2012] Spatial fit model total counts = 2331.020000, observed total counts = 2290.000000
[Wed Aug  8 15:15:14 2012] Offset between fit and detection position for source 1 = 0.009034 pixels
[Wed Aug  8 15:15:14 2012] 2322.291000 total counts/ 505.461000 bgd. counts: snr = 80.810997
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.009034 pixels
  Position = (278.8, 370.1) = 17 20 22.15 57 58 25.6
  Extent = 5.6 (5.4-5.8)", rotation angle = 0
  Source counts = 1816.8 +/- 48.2
  Background counts = 505.5
  Rate = 0.1 +/- 0.003
[Wed Aug  8 15:15:14 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 15:15:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 15:15:14 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 15:15:14 2012] Source does appear to be extended
[Wed Aug  8 15:15:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 16:34:09 2012] Counts = 1816.830000, rescaling region sizes by 2.000000
[Wed Aug  8 16:34:09 2012] XMMSAS src. selection expression = ellipse(24202.951200, 32149.999200, 670.380019, 670.380019, 0.000000, X, Y)
[Wed Aug  8 16:34:09 2012] Writing source region out to fullrun_mos2_xmm0603190101_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug  8 16:34:09 2012] Extracting stamp from image fullrun_mos2_xmm0603190101_pi300-10000_cl_sm2.00.img.gz, (240, 332) - (317, 409)
[Wed Aug  8 16:34:09 2012] XMMSAS bgd. selection expression = annulus(24202.951200, 32149.999200, 2234.600064, 4469.200129, X, Y) && !ellipse(21695.994797, 36668.112549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19374.814194, 28301.759460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28659.015780, 33836.011600, 312.810409, 312.810409, 0.000000, X, Y) && !ellipse(20812.043430, 27667.753161, 606.581772, 408.384147, 314.258896, X, Y)
[Wed Aug  8 16:34:09 2012] Writing fullrun_mos2_xmm0603190101_pi300-10000_pass1_cl_src1.gif
[Wed Aug  8 16:34:14 2012] Mean detx,y = (-1315.50, 4321.13) 
[Wed Aug  8 16:34:16 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 16:35:14 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 16:35:14 2012] Setting source spectrum file to fullrun_mos2_xmm0603190101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  8 16:35:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603190101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug  8 16:52:25 2012] Updating aperture counts using extracted products
[Wed Aug  8 16:52:25 2012] Error reading totcts from fullrun_mos2_xmm0603190101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  8 16:52:25 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 16:52:25 2012] Using photon index=1.80, rate=0.0976, arf fullrun_mos2_xmm0603190101_pi300-10000_pass1_cl_src1.arf
[Wed Aug  8 16:52:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 16:52:25 2012] Updating source flux to 1.2e-12
[Wed Aug  8 16:53:11 2012] Reading fit data from xmm0603190101/analysis//spectral/fullrun_mos2_xmm0603190101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug  8 16:53:11 2012] Spectral fit parameter nH value = 1.17017e+22
[Wed Aug  8 16:53:11 2012] Spectral fit parameter PhoIndex value = 9.5
[Wed Aug  8 16:53:11 2012] Failed to get F(0.3-8.0) from xmm0603190101/analysis//spectral/fullrun_mos2_xmm0603190101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug  8 16:53:11 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 16:53:11 2012] Using Nh = 1.2e+22, photon index=9.50, rate=0.0976, arf fullrun_mos2_xmm0603190101_pi300-10000_pass1_cl_src1.arf
[Wed Aug  8 16:53:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 16:53:11 2012] Updating source flux to 7e-13