[Tue Mar  6 10:24:37 2012] Detection parameters:
  Position = (292.9, 325.9) = 4 9 36.84 -7 50 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 386.8 +/- 30.6
  Background counts = 132.1
  Rate = 0.02 +/- 0.001

[Tue Mar  6 10:24:38 2012] Off-axis axis estimate = 2.03'
[Tue Mar  6 10:35:48 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 10:35:48 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Tue Mar  6 10:35:48 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818
[Tue Mar  6 10:35:48 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.44"
[Tue Mar  6 10:42:50 2012] fullrun_pn_xmm0603170501_pi300-10000_cl_pass0_src2.ximg exists
[Tue Mar  6 10:42:50 2012] fullrun_pn_xmm0603170501_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Mar  6 10:42:50 2012] Fit fullrun_pn_xmm0603170501_pi300-10000_cl_pass0_src2 appears to have run properly
[Tue Mar  6 10:42:50 2012] fullrun_pn_xmm0603170501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Mar  6 10:42:50 2012] fullrun_pn_xmm0603170501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Mar  6 10:42:50 2012] Fit fullrun_pn_xmm0603170501_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Mar  6 11:18:11 2012] Spatial fit model total counts = 2206.970000, observed total counts = 2136.000000
[Tue Mar  6 11:18:11 2012] Offset between fit and detection position for source 2 = 2.547855 pixels
[Tue Mar  6 11:18:11 2012] 2093.954000 total counts/ 1351.970000 bgd. counts: snr = 20.179528
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.547855 pixels
  Position = (293.9, 328.3) = 4 9 36.57 -7 50 28.8
  Extent = 13.7 (11.3-14.9)", rotation angle = 0
  Source counts = 742.0 +/- 45.8
  Background counts = 1352.0
  Rate = 0.02 +/- 0.001
[Tue Mar  6 11:18:11 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 11:18:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 11:18:11 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 11:18:11 2012] Source does appear to be extended
[Tue Mar  6 11:18:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 11:18:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar  6 11:18:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar  6 11:18:25 2012] Initial guess for spatial extent in simple fitting = 13.68"
[Tue Mar  6 11:18:25 2012] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.053
[Tue Mar  6 11:18:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.68"
[Tue Mar  6 13:34:38 2012] fullrun_pn_xmm0603170501_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar  6 13:34:38 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0603170501_pi300-10000_cl_pass1_src1.csv
[Tue Mar  6 13:34:38 2012] fullrun_pn_xmm0603170501_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar  6 13:34:38 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0603170501_pi300-10000_cl_pass1_src1.csv
[Tue Mar  6 13:34:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603170501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603170501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 13:34:38 2012] fullrun_pn_xmm0603170501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar  6 13:34:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603170501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Mar  6 13:34:38 2012] fullrun_pn_xmm0603170501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar  6 13:34:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603170501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Mar  6 13:34:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603170501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603170501_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 13:51:39 2012] Warning, spatial fit 1 centroid is now closest to src. 1
[Tue Mar  6 13:51:39 2012] Source 1 in spatial fitting is no longer close to this source
[Tue Mar  6 13:51:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 13:51:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 13:51:39 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 13:51:39 2012] Source does appear to be extended
[Tue Mar  6 13:51:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 13:51:47 2012] XMMSAS src. selection expression = ellipse(25518.708400, 28512.589000, 821.094024, 821.094024, 0.000000, X, Y)
[Tue Mar  6 13:51:47 2012] Writing source region out to fullrun_pn_xmm0603170501_pi300-10000_pass1_cl_src2_src.reg
[Tue Mar  6 13:51:47 2012] Extracting stamp from image fullrun_pn_xmm0603170501_pi300-10000_cl_sm2.00.img.gz, (247, 281) - (341, 375)
[Tue Mar  6 13:51:47 2012] XMMSAS bgd. selection expression = annulus(25518.708400, 28512.589000, 1368.490039, 2736.980079, X, Y) && !ellipse(24790.852000, 26876.160000, 1132.784033, 1132.784033, 0.000000, X, Y) && !ellipse(24263.559400, 24831.682200, 1544.116844, 1544.116844, 0.000000, X, Y)
[Tue Mar  6 13:51:47 2012] Writing fullrun_pn_xmm0603170501_pi300-10000_pass1_cl_src2.gif
[Tue Mar  6 13:57:36 2012] Mean detx,y = (151.85, 3591.32) 
[Tue Mar  6 13:57:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar  6 13:58:24 2012] Binned source spectrum to 10 counts/bin
[Tue Mar  6 13:58:25 2012] Setting source spectrum file to fullrun_pn_xmm0603170501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar  6 13:58:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603170501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Mar  6 15:20:46 2012] Updating aperture counts using extracted products
[Tue Mar  6 15:20:46 2012] Error reading totcts from fullrun_pn_xmm0603170501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar  6 15:20:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar  6 15:20:46 2012] Using photon index=1.80, rate=0.02, arf fullrun_pn_xmm0603170501_pi300-10000_pass1_cl_src2.arf
[Tue Mar  6 15:20:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar  6 15:20:46 2012] Updating source flux to 7.2e-14
[Tue Mar  6 15:22:12 2012] Reading fit data from xmm0603170501/analysis//spectral/fullrun_pn_xmm0603170501_pi300-10000_pass1_cl_src2_pl.csv
[Tue Mar  6 15:22:12 2012] Spectral fit parameter nH value = 2.2037e+21
[Tue Mar  6 15:22:12 2012] Spectral fit parameter PhoIndex value = 3.36815
[Tue Mar  6 15:22:12 2012] Failed to get F(0.3-8.0) from xmm0603170501/analysis//spectral/fullrun_pn_xmm0603170501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Mar  6 15:22:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar  6 15:22:12 2012] Using Nh = 2.2e+21, photon index=3.37, rate=0.02, arf fullrun_pn_xmm0603170501_pi300-10000_pass1_cl_src2.arf
[Tue Mar  6 15:22:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar  6 15:22:12 2012] Updating source flux to 5.1e-14