[Thu May  9 14:31:26 2013] Detection parameters:
  Position = (161.6, 175.5) = 4 10 15.24 -8 1 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.6 +/- 13.7
  Background counts = 21.1
  Rate = 0.003 +/- 0.0004

[Thu May  9 14:31:26 2013] Off-axis axis estimate = 13.34'
[Thu May  9 14:48:36 2013] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Thu May  9 14:48:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  9 14:48:36 2013] Initial guess for spatial extent in simple fitting = 13.10"
[Thu May  9 14:48:36 2013] source mask rpix=3.0, npix_max = 49, mask sum = 26, frac = 0.527
[Thu May  9 14:48:36 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 13.10"
[Thu May  9 14:55:20 2013] fullrun_mos1_xmm0603170401_pi300-10000_cl_pass0_src6.ximg exists
[Thu May  9 14:55:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603170401_pi300-10000_cl_pass0_src6.csv
[Thu May  9 14:55:20 2013] fullrun_mos1_xmm0603170401_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu May  9 14:55:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603170401_pi300-10000_cl_pass0_src6.csv
[Thu May  9 14:55:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603170401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603170401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 14:55:21 2013] fullrun_mos1_xmm0603170401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu May  9 14:55:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603170401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu May  9 14:55:21 2013] fullrun_mos1_xmm0603170401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu May  9 14:55:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603170401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu May  9 14:55:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603170401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603170401_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 15:02:15 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.198679 pixels away
[Thu May  9 15:02:15 2013] Vigneting correction estimate = 1.000000
[Thu May  9 15:02:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 15:02:15 2013] Assessing source extent using major
[Thu May  9 15:02:15 2013] Source does appear to be extended
[Thu May  9 15:02:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 15:02:15 2013] Deleting source due to low Poisson probability 0.8