[Fri May 31 01:15:39 2013] Detection parameters:
  Position = (295.2, 329.7) = 4 9 35.99 -7 50 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 277.5 +/- 25.0
  Background counts = 114.8
  Rate = 0.01 +/- 0.001

[Fri May 31 01:15:40 2013] Off-axis axis estimate = 2.28'
[Fri May 31 01:29:45 2013] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Fri May 31 01:29:45 2013] Initial guess for spatial extent in simple fitting = 7.57"
[Fri May 31 01:29:45 2013] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.997
[Fri May 31 01:29:45 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.57"
[Fri May 31 01:55:22 2013] fullrun_pn_xmm0603170301_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 31 01:55:22 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0603170301_pi300-10000_cl_pass0_src1.csv
[Fri May 31 01:55:22 2013] fullrun_pn_xmm0603170301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 31 01:55:22 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0603170301_pi300-10000_cl_pass0_src1.csv
[Fri May 31 01:55:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603170301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603170301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 01:55:22 2013] fullrun_pn_xmm0603170301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 31 01:55:22 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0603170301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 31 01:55:22 2013] fullrun_pn_xmm0603170301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 31 01:55:22 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0603170301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 31 01:55:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603170301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603170301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 02:42:48 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.222023 pixels away
[Fri May 31 02:42:48 2013] Spatial fit model total counts = 1995.210000, observed total counts = 1942.000000
[Fri May 31 02:42:48 2013] Offset between fit and detection position for source 1 = 2.142303 pixels
[Fri May 31 02:42:48 2013] Warning, changing simple spatial fit ID from 1 to 2
[Fri May 31 02:42:48 2013] 1919.709000 total counts/ 1486.350000 bgd. counts: snr = 11.240543
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.142303 pixels
  Position = (294.3, 327.7) = 4 9 36.25 -7 50 32.8
  Extent = 14.8 (14.7-29.6)" x 4.4 (3.7-5.0)", rotation angle = 289 (286-292) degrees
  Source counts = 433.4 +/- 43.8
  Background counts = 1486.3
  Rate = 0.01 +/- 0.001
[Fri May 31 02:42:48 2013] Vigneting correction estimate = 1.000000
[Fri May 31 02:42:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 02:42:48 2013] Assessing source extent using major axis lower bound
[Fri May 31 02:42:48 2013] Source does appear to be extended
[Fri May 31 02:42:48 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.92
[Fri May 31 02:42:48 2013] Source is asymmetric
[Fri May 31 02:42:48 2013] Source is confused with source 2
[Fri May 31 02:43:04 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 02:43:04 2013] Initial guess for spatial extent in simple fitting = 9.60"
[Fri May 31 02:43:04 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.854
[Fri May 31 02:43:04 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.60"
[Fri May 31 04:09:40 2013] fullrun_pn_xmm0603170301_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 31 04:09:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603170301_pi300-10000_cl_pass1_src1.csv
[Fri May 31 04:09:40 2013] fullrun_pn_xmm0603170301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 31 04:09:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603170301_pi300-10000_cl_pass1_src1.csv
[Fri May 31 04:09:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603170301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603170301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 04:09:40 2013] fullrun_pn_xmm0603170301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 31 04:09:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603170301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 31 04:09:40 2013] fullrun_pn_xmm0603170301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 31 04:09:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603170301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 31 04:09:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603170301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603170301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 04:39:35 2013] Spatial fit model total counts = 2362.990000, observed total counts = 2010.000000
[Fri May 31 04:39:35 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 04:39:35 2013] Vigneting correction estimate = 1.000000
[Fri May 31 04:39:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 04:39:35 2013] Assessing source extent using major axis lower bound
[Fri May 31 04:39:35 2013] Source does appear to be extended
[Fri May 31 04:39:35 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.92
[Fri May 31 04:39:35 2013] Source is asymmetric
[Fri May 31 04:39:48 2013] XMMSAS src. selection expression = ellipse(25557.494800, 28465.129400, 888.498026, 262.954208, 289.295000, X, Y)
[Fri May 31 04:39:48 2013] Writing source region out to fullrun_pn_xmm0603170301_pi300-10000_pass1_cl_src1_src.reg
[Fri May 31 04:39:48 2013] Extracting stamp from image fullrun_pn_xmm0603170301_pi300-10000_cl_sm2.00.img.gz, (243, 277) - (345, 379)
[Fri May 31 04:39:48 2013] XMMSAS bgd. selection expression = annulus(25557.494800, 28465.129400, 1480.830043, 2961.660085, X, Y) && !ellipse(25416.822200, 28063.060400, 1524.200044, 359.088810, 110.631700, X, Y) && !ellipse(25354.669200, 27871.774000, 1145.824033, 368.551211, 114.079200, X, Y) && !ellipse(24217.864460, 24871.335600, 1444.785661, 1444.785661, 0.000000, X, Y)
[Fri May 31 04:39:48 2013] Writing fullrun_pn_xmm0603170301_pi300-10000_pass1_cl_src1.gif
[Fri May 31 04:46:54 2013] Mean detx,y = (132.58, 3669.19) 
[Fri May 31 04:47:08 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 04:47:37 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 04:47:38 2013] Setting source spectrum file to fullrun_pn_xmm0603170301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 31 04:47:38 2013] Setting bgd. spectrum file to fullrun_pn_xmm0603170301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May 31 06:22:23 2013] Updating aperture counts using extracted products
[Fri May 31 06:22:23 2013] Total counts from fullrun_pn_xmm0603170301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 780.00
[Fri May 31 06:22:23 2013] Total counts from fullrun_pn_xmm0603170301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 9582.00
[Fri May 31 06:22:23 2013] Got source and background scale factors 702830.000000, 9740145.000000
[Fri May 31 06:22:23 2013] User source parameters:
  Position = (294.3, 327.7) = 4 9 36.25 -7 50 32.8
  Extent = 14.8 (14.7-29.6)" x 4.4 (3.7-5.0)", rotation angle = 289 (286-292) degrees
  Source aperture counts = 88.6 +/- 28.9
  Background aperture counts = 691.4
  Rate = 0.002 +/- 0.0008

[Fri May 31 06:22:24 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 06:22:24 2013] Using photon index=1.80, rate=0.0118, arf fullrun_pn_xmm0603170301_pi300-10000_pass1_cl_src1.arf
[Fri May 31 06:22:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 06:22:24 2013] Updating source flux to 5.1e-14
[Fri May 31 06:22:33 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Fri May 31 06:22:33 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri May 31 06:22:40 2013] xmm0603170301/analysis//spectral/fullrun_pn_xmm0603170301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete