[Fri May 31 01:16:06 2013] Detection parameters:
  Position = (161.6, 175.2) = 4 10 15.12 -8 1 35.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.4 +/- 15.3
  Background counts = 16.5
  Rate = 0.004 +/- 0.0004

[Fri May 31 01:16:06 2013] Off-axis axis estimate = 13.35'
[Fri May 31 01:55:22 2013] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Fri May 31 01:55:22 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 31 01:55:22 2013] Initial guess for spatial extent in simple fitting = 13.10"
[Fri May 31 01:55:22 2013] source mask rpix=3.0, npix_max = 49, mask sum = 44, frac = 0.892
[Fri May 31 01:55:22 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 13.10"
[Fri May 31 02:13:48 2013] fullrun_mos1_xmm0603170301_pi300-10000_cl_pass0_src3.ximg exists
[Fri May 31 02:13:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603170301_pi300-10000_cl_pass0_src3.csv
[Fri May 31 02:13:48 2013] fullrun_mos1_xmm0603170301_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri May 31 02:13:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603170301_pi300-10000_cl_pass0_src3.csv
[Fri May 31 02:13:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603170301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603170301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 02:13:48 2013] fullrun_mos1_xmm0603170301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri May 31 02:13:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603170301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri May 31 02:13:48 2013] fullrun_mos1_xmm0603170301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May 31 02:13:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603170301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri May 31 02:13:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603170301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603170301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 02:42:52 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.198916 pixels away
[Fri May 31 02:42:52 2013] Vigneting correction estimate = 1.000000
[Fri May 31 02:42:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 02:42:52 2013] Assessing source extent using major
[Fri May 31 02:42:52 2013] Source does appear to be extended
[Fri May 31 02:42:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 02:42:52 2013] Deleting source due to low Poisson probability 0.9