[Sat Apr 28 20:59:43 2012] Detection parameters:
  Position = (314.5, 196.0) = 13 23 18.56 -43 13 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.5 +/- 15.4
  Background counts = 36.5
  Rate = 0.004 +/- 0.0005

[Sat Apr 28 20:59:44 2012] Off-axis axis estimate = 7.52'
[Sat Apr 28 22:07:42 2012] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Sat Apr 28 22:07:42 2012] Initial guess for spatial extent in simple fitting = 10.19"
[Sat Apr 28 22:07:42 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.929
[Sat Apr 28 22:07:42 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.19"
[Sat Apr 28 22:54:03 2012] fullrun_mos2_xmm0603150401_pi300-10000_cl_pass0_src6.ximg exists
[Sat Apr 28 22:54:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603150401_pi300-10000_cl_pass0_src6.csv
[Sat Apr 28 22:54:03 2012] fullrun_mos2_xmm0603150401_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Apr 28 22:54:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603150401_pi300-10000_cl_pass0_src6.csv
[Sat Apr 28 22:54:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603150401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603150401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 28 22:54:04 2012] fullrun_mos2_xmm0603150401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Apr 28 22:54:04 2012] fullrun_mos2_xmm0603150401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Apr 28 22:54:04 2012] Fit fullrun_mos2_xmm0603150401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Apr 28 22:54:18 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 14.317145 pixels away
[Sat Apr 28 22:54:18 2012] Vigneting correction estimate = 1.000000
[Sat Apr 28 22:54:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 28 22:54:18 2012] Assessing source extent using major
[Sat Apr 28 22:54:18 2012] Source does appear to be extended
[Sat Apr 28 22:54:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr 28 23:47:43 2012] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Sat Apr 28 23:47:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Apr 28 23:47:43 2012] Initial guess for spatial extent in simple fitting = 10.19"
[Sat Apr 28 23:47:43 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.929
[Sat Apr 28 23:47:43 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 10.19"
[Sun Apr 29 00:28:36 2012] fullrun_mos2_xmm0603150401_pi300-10000_cl_pass1_src6.ximg exists
[Sun Apr 29 00:28:36 2012] fullrun_mos2_xmm0603150401_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Apr 29 00:28:36 2012] Fit fullrun_mos2_xmm0603150401_pi300-10000_cl_pass1_src6 appears to have run properly
[Sun Apr 29 00:28:36 2012] fullrun_mos2_xmm0603150401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Apr 29 00:28:36 2012] fullrun_mos2_xmm0603150401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Apr 29 00:28:36 2012] Fit fullrun_mos2_xmm0603150401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Apr 29 00:28:46 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 12.995994 pixels away
[Sun Apr 29 00:28:46 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 00:28:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 00:28:46 2012] Assessing source extent using major
[Sun Apr 29 00:28:46 2012] Source does appear to be extended
[Sun Apr 29 00:28:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 01:31:14 2012] XMMSAS src. selection expression = ellipse(27317.072815, 17006.708603, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Apr 29 01:31:14 2012] Writing source region out to fullrun_mos2_xmm0603150401_pi300-10000_pass1_cl_src15_src.reg
[Sun Apr 29 01:31:14 2012] Extracting stamp from image fullrun_mos2_xmm0603150401_pi300-10000_cl_sm2.00.img.gz, (277, 159) - (352, 234)
[Sun Apr 29 01:31:14 2012] XMMSAS bgd. selection expression = annulus(27317.072815, 17006.708603, 1087.500000, 2175.000000, X, Y)
[Sun Apr 29 01:31:14 2012] Writing fullrun_mos2_xmm0603150401_pi300-10000_pass1_cl_src15.gif
[Sun Apr 29 01:33:16 2012] Mean detx,y = (2696.66, -10528.40) 
[Sun Apr 29 01:33:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr 29 01:33:25 2012] Binned source spectrum to 10 counts/bin
[Sun Apr 29 01:33:25 2012] Setting source spectrum file to fullrun_mos2_xmm0603150401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Apr 29 01:33:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603150401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun Apr 29 01:46:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Apr 29 01:46:18 2012] rmf not generated due to insufficient counts
[Sun Apr 29 01:52:34 2012] Updating aperture counts using extracted products
[Sun Apr 29 01:52:34 2012] Error reading totcts from fullrun_mos2_xmm0603150401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Apr 29 01:52:34 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr 29 01:52:34 2012] Using photon index=1.80, rate=0.00358, arf fullrun_mos2_xmm0603150401_pi300-10000_pass1_cl_src15.arf
[Sun Apr 29 01:52:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr 29 01:52:34 2012] Updating source flux to 6.3e-14
[Sun Apr 29 01:52:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting