[Tue May 7 01:13:14 2013] Detection parameters: Position = (237.9, 276.2) = 3 18 14.94 -44 14 35.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 223.0 +/- 25.7 Background counts = 465.8 Rate = 0.003 +/- 0.0003 [Tue May 7 01:13:15 2013] Off-axis axis estimate = 4.68' [Tue May 7 01:19:50 2013] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting [Tue May 7 01:19:50 2013] Initial guess for spatial extent in simple fitting = 8.77" [Tue May 7 01:19:50 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.988 [Tue May 7 01:19:50 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 8.77" [Tue May 7 04:45:56 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src32.ximg exists [Tue May 7 04:45:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src32.csv [Tue May 7 04:45:56 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src32_1.ximg exists [Tue May 7 04:45:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src32.csv [Tue May 7 04:45:56 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src32_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 04:45:58 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src32.ximg exists [Tue May 7 04:45:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src32.csv [Tue May 7 04:45:58 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists [Tue May 7 04:45:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src32.csv [Tue May 7 04:45:58 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src32_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 10:16:11 2013] Source 42 is offset by 6.952293 and 5.575239 pixels which is larger than 2 X fitted extent = 1.007697 x 1.924952, not incorporating fit results [Tue May 7 10:16:12 2013] Vigneting correction estimate = 1.000000 [Tue May 7 10:16:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 10:16:12 2013] Assessing source extent using major [Tue May 7 10:16:12 2013] Source does appear to be extended [Tue May 7 10:16:12 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 10:16:45 2013] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting [Tue May 7 10:16:45 2013] Initial guess for spatial extent in simple fitting = 8.77" [Tue May 7 10:16:45 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.988 [Tue May 7 10:16:45 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 8.77" [Tue May 7 15:57:42 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src30.ximg exists [Tue May 7 15:57:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src30.csv [Tue May 7 15:57:42 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src30_1.ximg exists [Tue May 7 15:57:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src30.csv [Tue May 7 15:57:42 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src30_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 15:57:43 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src30.ximg exists [Tue May 7 15:57:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src30.csv [Tue May 7 15:57:43 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists [Tue May 7 15:57:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src30.csv [Tue May 7 15:57:43 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 17:37:21 2013] Source 42 is offset by 6.971626 and 5.636871 pixels which is larger than 2 X fitted extent = 1.013251 x 2.077117, not incorporating fit results [Tue May 7 17:37:21 2013] Vigneting correction estimate = 1.000000 [Tue May 7 17:37:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 17:37:21 2013] Assessing source extent using major [Tue May 7 17:37:21 2013] Source does appear to be extended [Tue May 7 17:37:21 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 17:37:40 2013] XMMSAS src. selection expression = ellipse(20648.041458, 23979.063782, 652.500000, 652.500000, 0.000000, X, Y) [Tue May 7 17:37:40 2013] Writing source region out to fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src42_src.reg [Tue May 7 17:37:40 2013] Extracting stamp from image fullrun_pn_xmm0603050201_pi300-10000_cl_sm2.00.img.gz, (200, 239) - (275, 314) [Tue May 7 17:37:40 2013] XMMSAS bgd. selection expression = annulus(20648.041458, 23979.063782, 1087.500000, 2175.000000, X, Y) && !ellipse(24389.674200, 24591.940200, 6245.664180, 5393.088155, 66.950600, X, Y) && !ellipse(22914.908000, 22827.596000, 1233.552035, 1233.552035, 0.000000, X, Y) && !ellipse(22979.541000, 25311.679800, 3688.512106, 3688.512106, 0.000000, X, Y) && !ellipse(24563.634000, 28430.704000, 2597.840075, 2597.840075, 0.000000, X, Y) && !ellipse(21151.928848, 26501.628357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20956.218674, 25885.414642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20375.476151, 25262.640350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22260.197815, 22058.815170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19543.520065, 21131.118729, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 7 17:37:40 2013] Writing fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src42.gif [Tue May 7 18:24:30 2013] Mean detx,y = (3775.90, -1594.56) [Tue May 7 18:24:34 2013] Setting backscal keywords in source and bgd. spectrum [Tue May 7 18:24:50 2013] Binned source spectrum to 10 counts/bin [Tue May 7 18:24:50 2013] Setting source spectrum file to fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src42_src_b10.pi.gz [Tue May 7 18:24:50 2013] Setting bgd. spectrum file to fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src42_bgd.pi.gz [Wed May 8 05:34:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 8 05:34:21 2013] rmf not generated due to insufficient counts [Wed May 8 08:20:26 2013] Updating aperture counts using extracted products [Wed May 8 08:20:26 2013] Total counts from fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 2466.00 [Wed May 8 08:20:27 2013] Total counts from fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src42_bgd.pi.gz = 952.00 [Wed May 8 08:20:27 2013] Got source and background scale factors 934173.000000, 705889.000000 [Wed May 8 08:20:27 2013] User source parameters: Position = (237.9, 276.2) = 3 18 14.94 -44 14 35.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 1206.1 +/- 50.7 Background aperture counts = 1259.9 Rate = 0.02 +/- 0.0007 [Wed May 8 08:20:27 2013] Updating counts from extracted products [Wed May 8 08:20:27 2013] Set source signif. to 1206.12/35.49 = 33.98 [Wed May 8 08:20:34 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 08:20:34 2013] Using photon index=1.80, rate=0.0161, arf fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src42.arf [Wed May 8 08:20:34 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 08:20:34 2013] Updating source flux to 5.7e-14 [Wed May 8 08:20:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 08:21:10 2013] xmm0603050201/analysis//spectral/fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete