[Tue May 7 01:13:13 2013] Detection parameters: Position = (243.7, 305.2) = 3 18 12.58 -44 12 55.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 297.6 +/- 62.9 Background counts = 487.3 Rate = 0.004 +/- 0.0008 [Tue May 7 01:13:15 2013] Off-axis axis estimate = 4.00' [Tue May 7 01:19:50 2013] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting [Tue May 7 01:19:50 2013] Initial guess for spatial extent in simple fitting = 8.43" [Tue May 7 01:19:50 2013] source mask rpix=1.9, npix_max = 23, mask sum = 14, frac = 0.589 [Tue May 7 01:19:50 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 8.43" [Tue May 7 04:45:56 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src26.ximg exists [Tue May 7 04:45:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src26.csv [Tue May 7 04:45:56 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src26_1.ximg exists [Tue May 7 04:45:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src26.csv [Tue May 7 04:45:56 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src26_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 04:45:58 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists [Tue May 7 04:45:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src26.csv [Tue May 7 04:45:58 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists [Tue May 7 04:45:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src26.csv [Tue May 7 04:45:58 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 10:16:11 2013] Source 35 is offset by 2.932118 and -0.116934 pixels which is larger than 2 X fitted extent = 0.968777 x 4.673196, not incorporating fit results [Tue May 7 10:16:12 2013] Vigneting correction estimate = 1.000000 [Tue May 7 10:16:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 10:16:12 2013] Assessing source extent using major [Tue May 7 10:16:12 2013] Source does appear to be extended [Tue May 7 10:16:12 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 10:16:12 2013] Source is confused with source 39 [Tue May 7 10:16:45 2013] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting [Tue May 7 10:16:45 2013] Initial guess for spatial extent in simple fitting = 8.43" [Tue May 7 10:16:45 2013] source mask rpix=1.9, npix_max = 23, mask sum = 14, frac = 0.589 [Tue May 7 10:16:45 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 8.43" [Tue May 7 15:57:42 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src26.ximg exists [Tue May 7 15:57:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src26.csv [Tue May 7 15:57:42 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src26_1.ximg exists [Tue May 7 15:57:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src26.csv [Tue May 7 15:57:42 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src26_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 15:57:43 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists [Tue May 7 15:57:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src26.csv [Tue May 7 15:57:43 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists [Tue May 7 15:57:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src26.csv [Tue May 7 15:57:43 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 17:37:21 2013] Warning, spatial fit 26 centroid is now closest to src. 39 [Tue May 7 17:37:21 2013] Vigneting correction estimate = 1.000000 [Tue May 7 17:37:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 17:37:21 2013] Assessing source extent using major [Tue May 7 17:37:21 2013] Source does appear to be extended [Tue May 7 17:37:21 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 17:37:40 2013] XMMSAS src. selection expression = ellipse(21151.928848, 26501.628357, 652.500000, 652.500000, 0.000000, X, Y) [Tue May 7 17:37:40 2013] Writing source region out to fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src35_src.reg [Tue May 7 17:37:40 2013] Extracting stamp from image fullrun_pn_xmm0603050201_pi300-10000_cl_sm2.00.img.gz, (206, 268) - (281, 343) [Tue May 7 17:37:40 2013] XMMSAS bgd. selection expression = annulus(21151.928848, 26501.628357, 1087.500000, 2175.000000, X, Y) && !ellipse(24389.674200, 24591.940200, 6245.664180, 5393.088155, 66.950600, X, Y) && !ellipse(22979.541000, 25311.679800, 3688.512106, 3688.512106, 0.000000, X, Y) && !ellipse(23893.477800, 27553.190000, 628.340018, 628.340018, 0.000000, X, Y) && !ellipse(24563.634000, 28430.704000, 2597.840075, 2597.840075, 0.000000, X, Y) && !ellipse(21645.485519, 28464.332214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21447.984528, 27799.048248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21289.511139, 27183.381470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20956.218674, 25885.414642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20648.041458, 23979.063782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25603.004000, 30851.682000, 2647.792076, 2647.792076, 0.000000, X, Y) && !ellipse(23291.265167, 29255.942474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20566.926331, 27692.371826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20375.476151, 25262.640350, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 7 17:37:40 2013] Writing fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src35.gif [Tue May 7 18:21:50 2013] Mean detx,y = (3864.65, 1066.94) [Tue May 7 18:21:51 2013] Setting backscal keywords in source and bgd. spectrum [Tue May 7 18:22:03 2013] Binned source spectrum to 10 counts/bin [Tue May 7 18:22:03 2013] Setting source spectrum file to fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src35_src_b10.pi.gz [Tue May 7 18:22:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src35_bgd.pi.gz [Wed May 8 05:30:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 8 05:30:22 2013] rmf not generated due to insufficient counts [Wed May 8 08:20:25 2013] Updating aperture counts using extracted products [Wed May 8 08:20:25 2013] Total counts from fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 3198.00 [Wed May 8 08:20:25 2013] Total counts from fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src35_bgd.pi.gz = 1455.00 [Wed May 8 08:20:26 2013] Got source and background scale factors 926151.000000, 849600.000000 [Wed May 8 08:20:26 2013] User source parameters: Position = (243.7, 305.2) = 3 18 12.58 -44 12 55.0 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 1611.9 +/- 57.6 Background aperture counts = 1586.1 Rate = 0.02 +/- 0.0008 [Wed May 8 08:20:26 2013] Updating counts from extracted products [Wed May 8 08:20:26 2013] Set source signif. to 1611.90/39.83 = 40.47 [Wed May 8 08:20:34 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 08:20:34 2013] Using photon index=1.80, rate=0.0215, arf fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src35.arf [Wed May 8 08:20:34 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 08:20:34 2013] Updating source flux to 7.8e-14 [Wed May 8 08:20:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 08:21:10 2013] xmm0603050201/analysis//spectral/fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete