[Tue May 7 01:13:12 2013] Detection parameters: Position = (278.2, 267.5) = 3 17 58.62 -44 15 24.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 8818.3 +/- 120.1 Background counts = 678.0 Rate = 0.2 +/- 0.002 [Tue May 7 01:13:15 2013] Off-axis axis estimate = 2.68' [Tue May 7 01:19:50 2013] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting [Tue May 7 01:19:50 2013] Initial guess for spatial extent in simple fitting = 7.77" [Tue May 7 01:19:50 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.957 [Tue May 7 01:19:50 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.77" [Tue May 7 04:45:56 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src2.ximg exists [Tue May 7 04:45:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src2.csv [Tue May 7 04:45:56 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src2_1.ximg exists [Tue May 7 04:45:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src2.csv [Tue May 7 04:45:56 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 04:45:57 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Tue May 7 04:45:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src2.csv [Tue May 7 04:45:57 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Tue May 7 04:45:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src2.csv [Tue May 7 04:45:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 10:16:11 2013] Spatial fit model total counts = 63682.000000, observed total counts = 39731.000000 [Tue May 7 10:16:11 2013] Poor agreement between spatial fit and data for source 3 It may help to tweak spatial fit manually Not incorporating fit results [Tue May 7 10:16:12 2013] Vigneting correction estimate = 1.000000 [Tue May 7 10:16:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 10:16:12 2013] Assessing source extent using major [Tue May 7 10:16:12 2013] Source does appear to be extended [Tue May 7 10:16:12 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 10:16:45 2013] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting [Tue May 7 10:16:45 2013] Initial guess for spatial extent in simple fitting = 7.77" [Tue May 7 10:16:45 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.957 [Tue May 7 10:16:45 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.77" [Tue May 7 15:57:42 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src2.ximg exists [Tue May 7 15:57:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src2.csv [Tue May 7 15:57:42 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src2_1.ximg exists [Tue May 7 15:57:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src2.csv [Tue May 7 15:57:42 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 15:57:43 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Tue May 7 15:57:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src2.csv [Tue May 7 15:57:43 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Tue May 7 15:57:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src2.csv [Tue May 7 15:57:43 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 17:37:21 2013] Spatial fit model total counts = 61219.800000, observed total counts = 39731.000000 [Tue May 7 17:37:21 2013] Poor agreement between spatial fit and data for source 3 It may help to tweak spatial fit manually Not incorporating fit results [Tue May 7 17:37:21 2013] Spatial fit model total counts = 32280.300000, observed total counts = 25580.000000 [Tue May 7 17:37:21 2013] Poor agreement between spatial fit and data for source 3 It may help to tweak spatial fit manually Not incorporating fit results [Tue May 7 17:37:21 2013] Vigneting correction estimate = 1.000000 [Tue May 7 17:37:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 17:37:21 2013] Assessing source extent using major [Tue May 7 17:37:21 2013] Source does appear to be extended [Tue May 7 17:37:21 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 17:37:21 2013] Source is confused with source 1 [Tue May 7 17:37:39 2013] Counts = 8818.301758, rescaling region sizes by 2.000000 [Tue May 7 17:37:39 2013] XMMSAS src. selection expression = ellipse(24155.357727, 23220.251099, 1305.000000, 1305.000000, 0.000000, X, Y) [Tue May 7 17:37:39 2013] Writing source region out to fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src3_src.reg [Tue May 7 17:37:39 2013] Extracting stamp from image fullrun_pn_xmm0603050201_pi300-10000_cl_sm2.00.img.gz, (203, 192) - (353, 342) [Tue May 7 17:37:39 2013] XMMSAS bgd. selection expression = annulus(24155.357727, 23220.251099, 4350.000000, 8700.000000, X, Y) && !ellipse(24389.674200, 24591.940200, 6245.664180, 5393.088155, 66.950600, X, Y) && !ellipse(28281.918427, 24242.644470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22914.908000, 22827.596000, 1233.552035, 1233.552035, 0.000000, X, Y) && !ellipse(22979.541000, 25311.679800, 3688.512106, 3688.512106, 0.000000, X, Y) && !ellipse(25732.208832, 19708.656250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17339.783356, 27724.917175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32066.496600, 29023.908000, 1476.704042, 548.322416, 79.737500, X, Y) && !ellipse(23893.477800, 27553.190000, 628.340018, 628.340018, 0.000000, X, Y) && !ellipse(18140.453903, 17795.763397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31731.051056, 23625.966125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27226.005310, 22436.749298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29870.717163, 20543.694824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31807.829193, 16642.421326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28933.868835, 31873.509308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27266.037420, 31245.629600, 496.978414, 496.978414, 0.000000, X, Y) && !ellipse(24563.634000, 28430.704000, 2597.840075, 2597.840075, 0.000000, X, Y) && !ellipse(21645.485519, 28464.332214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21447.984528, 27799.048248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21289.511139, 27183.381470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21151.928848, 26501.628357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27409.412079, 26376.281769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20956.218674, 25885.414642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20648.041458, 23979.063782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26881.162140, 23770.102356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23348.223511, 20206.714523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22592.679169, 15953.451843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33135.760681, 14669.884567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26152.209800, 33406.422000, 2732.832079, 973.952028, 283.637100, X, Y) && !ellipse(26023.364000, 32484.412000, 2289.416066, 1138.352033, 98.619200, X, Y) && !ellipse(25707.054000, 30578.252000, 1298.920037, 1298.920037, 0.000000, X, Y) && !ellipse(25603.004000, 30851.682000, 2647.792076, 2647.792076, 0.000000, X, Y) && !ellipse(25469.777771, 29946.119995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23864.478027, 29594.044525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25081.994000, 29739.554000, 1323.896038, 1323.896038, 0.000000, X, Y) && !ellipse(23291.265167, 29255.942474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25842.867798, 29093.566193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26314.026642, 28662.585907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20566.926331, 27692.371826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20375.476151, 25262.640350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27570.556427, 23872.833405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28434.455170, 23508.412048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22260.197815, 22058.815170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19543.520065, 21131.118729, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 7 17:37:39 2013] Writing fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src3.gif [Tue May 7 17:42:54 2013] Mean detx,y = (88.33, -955.11) [Tue May 7 17:42:59 2013] Setting backscal keywords in source and bgd. spectrum [Tue May 7 17:44:10 2013] Binned source spectrum to 10 counts/bin [Tue May 7 17:44:11 2013] Setting source spectrum file to fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Tue May 7 17:44:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src3_bgd.pi.gz [Tue May 7 18:56:57 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Tue May 7 18:56:57 2013] rmf not generated due to insufficient counts [Wed May 8 08:20:19 2013] Updating aperture counts using extracted products [Wed May 8 08:20:19 2013] Total counts from fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 170219.00 [Wed May 8 08:20:19 2013] Total counts from fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 100243.00 [Wed May 8 08:20:19 2013] Got source and background scale factors 4389870.000000, 99188683.000000 [Wed May 8 08:20:19 2013] User source parameters: Position = (278.2, 267.5) = 3 17 58.62 -44 15 24.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 165782.5 +/- 413.6 Background aperture counts = 4436.5 Rate = 2 +/- 0.006 [Wed May 8 08:20:19 2013] Updating counts from extracted products [Wed May 8 08:20:19 2013] Set source signif. to 165782.47/66.61 = 2488.95 [Wed May 8 08:20:33 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 08:20:33 2013] Using photon index=1.80, rate=2.21, arf fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src3.arf [Wed May 8 08:20:33 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 08:20:33 2013] Updating source flux to 5.9e-12 [Wed May 8 08:20:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 08:21:10 2013] xmm0603050201/analysis//spectral/fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete