[Tue May 7 01:13:13 2013] Detection parameters: Position = (333.1, 366.9) = 3 17 36.41 -44 8 15.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 531.8 +/- 33.1 Background counts = 189.3 Rate = 0.01 +/- 0.0008 [Tue May 7 01:13:15 2013] Off-axis axis estimate = 5.57' [Tue May 7 01:19:50 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting [Tue May 7 01:19:50 2013] Initial guess for spatial extent in simple fitting = 9.21" [Tue May 7 01:19:50 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.095 [Tue May 7 01:19:50 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 9.21" [Tue May 7 04:45:56 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src19.ximg exists [Tue May 7 04:45:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src19.csv [Tue May 7 04:45:56 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src19_1.ximg exists [Tue May 7 04:45:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src19.csv [Tue May 7 04:45:56 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 04:45:58 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists [Tue May 7 04:45:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src19.csv [Tue May 7 04:45:58 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists [Tue May 7 04:45:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src19.csv [Tue May 7 04:45:58 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 10:16:11 2013] Source 25 is offset by 7.487228 and -2.255196 pixels which is larger than 2 X fitted extent = 1.326453 x 1.326453, not incorporating fit results [Tue May 7 10:16:12 2013] Vigneting correction estimate = 1.000000 [Tue May 7 10:16:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 10:16:12 2013] Assessing source extent using major [Tue May 7 10:16:12 2013] Source does appear to be extended [Tue May 7 10:16:12 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 10:16:45 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting [Tue May 7 10:16:45 2013] Initial guess for spatial extent in simple fitting = 9.21" [Tue May 7 10:16:45 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.095 [Tue May 7 10:16:45 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 9.21" [Tue May 7 15:57:42 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src19.ximg exists [Tue May 7 15:57:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src19.csv [Tue May 7 15:57:42 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src19_1.ximg exists [Tue May 7 15:57:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src19.csv [Tue May 7 15:57:42 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 15:57:43 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists [Tue May 7 15:57:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src19.csv [Tue May 7 15:57:43 2013] fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists [Tue May 7 15:57:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src19.csv [Tue May 7 15:57:43 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 17:37:21 2013] Spatial fit model total counts = 2198.110000, observed total counts = 1808.000000 [Tue May 7 17:37:21 2013] Poor agreement between spatial fit and data for source 25 It may help to tweak spatial fit manually Not incorporating fit results [Tue May 7 17:37:21 2013] Vigneting correction estimate = 1.000000 [Tue May 7 17:37:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 17:37:21 2013] Assessing source extent using major [Tue May 7 17:37:21 2013] Source does appear to be extended [Tue May 7 17:37:21 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 17:37:40 2013] XMMSAS src. selection expression = ellipse(28933.868835, 31873.509308, 652.500000, 652.500000, 0.000000, X, Y) [Tue May 7 17:37:40 2013] Writing source region out to fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src25_src.reg [Tue May 7 17:37:40 2013] Extracting stamp from image fullrun_pn_xmm0603050201_pi300-10000_cl_sm2.00.img.gz, (296, 329) - (371, 404) [Tue May 7 17:37:40 2013] XMMSAS bgd. selection expression = annulus(28933.868835, 31873.509308, 1087.500000, 2175.000000, X, Y) && !ellipse(24389.674200, 24591.940200, 6245.664180, 5393.088155, 66.950600, X, Y) && !ellipse(32066.496600, 29023.908000, 1476.704042, 548.322416, 79.737500, X, Y) && !ellipse(27266.037420, 31245.629600, 496.978414, 496.978414, 0.000000, X, Y) && !ellipse(24563.634000, 28430.704000, 2597.840075, 2597.840075, 0.000000, X, Y) && !ellipse(26719.737000, 35514.811400, 1660.768048, 623.376018, 99.432210, X, Y) && !ellipse(26359.360000, 34109.172000, 1366.416039, 1366.416039, 0.000000, X, Y) && !ellipse(26152.209800, 33406.422000, 2732.832079, 973.952028, 283.637100, X, Y) && !ellipse(26023.364000, 32484.412000, 2289.416066, 1138.352033, 98.619200, X, Y) && !ellipse(25707.054000, 30578.252000, 1298.920037, 1298.920037, 0.000000, X, Y) && !ellipse(25603.004000, 30851.682000, 2647.792076, 2647.792076, 0.000000, X, Y) [Tue May 7 17:37:40 2013] Writing fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src25.gif [Tue May 7 18:08:40 2013] Mean detx,y = (-2827.98, 7891.97) [Tue May 7 18:08:42 2013] Setting backscal keywords in source and bgd. spectrum [Tue May 7 18:08:59 2013] Binned source spectrum to 10 counts/bin [Tue May 7 18:08:59 2013] Setting source spectrum file to fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src25_src_b10.pi.gz [Tue May 7 18:08:59 2013] Setting bgd. spectrum file to fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src25_bgd.pi.gz [Wed May 8 05:19:47 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 8 05:19:47 2013] rmf not generated due to insufficient counts [Wed May 8 08:20:24 2013] Updating aperture counts using extracted products [Wed May 8 08:20:24 2013] Total counts from fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 1484.00 [Wed May 8 08:20:24 2013] Total counts from fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src25_bgd.pi.gz = 5723.00 [Wed May 8 08:20:24 2013] Got source and background scale factors 1201108.000000, 7031987.000000 [Wed May 8 08:20:24 2013] User source parameters: Position = (333.1, 366.9) = 3 17 36.41 -44 8 15.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 506.5 +/- 39.5 Background aperture counts = 977.5 Rate = 0.007 +/- 0.0005 [Wed May 8 08:20:24 2013] Updating counts from extracted products [Wed May 8 08:20:24 2013] Set source signif. to 506.48/31.27 = 16.20 [Wed May 8 08:20:33 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 08:20:33 2013] Using photon index=1.80, rate=0.00674, arf fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src25.arf [Wed May 8 08:20:33 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 08:20:34 2013] Updating source flux to 3e-14 [Wed May 8 08:20:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 08:21:10 2013] xmm0603050201/analysis//spectral/fullrun_pn_xmm0603050201_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete