[Tue May  7 01:14:11 2013] Detection parameters:
  Position = (269.4, 231.8) = 3 18 2.19 -44 18 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.5 +/- 21.8
  Background counts = 158.8
  Rate = 0.002 +/- 0.0003

[Tue May  7 01:14:11 2013] Off-axis axis estimate = 5.27'
[Tue May  7 05:51:11 2013] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Tue May  7 05:51:11 2013] Initial guess for spatial extent in simple fitting = 9.06"
[Tue May  7 05:51:11 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.936
[Tue May  7 05:51:11 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 9.06"
[Tue May  7 10:15:50 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_src27.ximg exists
[Tue May  7 10:15:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_src27.csv
[Tue May  7 10:15:50 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue May  7 10:15:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_src27.csv
[Tue May  7 10:15:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 10:15:51 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue May  7 10:15:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src27.csv
[Tue May  7 10:15:51 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue May  7 10:15:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src27.csv
[Tue May  7 10:15:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 10:16:30 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 10.084318 pixels away
[Tue May  7 10:16:30 2013] Vigneting correction estimate = 1.000000
[Tue May  7 10:16:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 10:16:30 2013] Assessing source extent using major
[Tue May  7 10:16:30 2013] Source does appear to be extended
[Tue May  7 10:16:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 16:34:23 2013] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Tue May  7 16:34:23 2013] Initial guess for spatial extent in simple fitting = 9.06"
[Tue May  7 16:34:23 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.936
[Tue May  7 16:34:23 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 9.06"
[Tue May  7 17:37:10 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_src26.ximg exists
[Tue May  7 17:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_src26.csv
[Tue May  7 17:37:10 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue May  7 17:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_src26.csv
[Tue May  7 17:37:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 17:37:10 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue May  7 17:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue May  7 17:37:10 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue May  7 17:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue May  7 17:37:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 17:37:28 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 10.084586 pixels away
[Tue May  7 17:37:28 2013] Vigneting correction estimate = 1.000000
[Tue May  7 17:37:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 17:37:28 2013] Assessing source extent using major
[Tue May  7 17:37:28 2013] Source does appear to be extended
[Tue May  7 17:37:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 06:48:17 2013] XMMSAS src. selection expression = ellipse(23390.921692, 20113.983643, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  8 06:48:17 2013] Writing source region out to fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src50_src.reg
[Wed May  8 06:48:17 2013] Extracting stamp from image fullrun_mos2_xmm0603050201_pi300-10000_cl_sm2.00.img.gz, (232, 194) - (307, 269)
[Wed May  8 06:48:17 2013] XMMSAS bgd. selection expression = annulus(23390.921692, 20113.983643, 1087.500000, 2175.000000, X, Y) && !ellipse(24390.840240, 24577.090546, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23350.767029, 21707.737991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25949.464569, 22657.897308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25578.229400, 19622.563000, 389.936811, 389.936811, 0.000000, X, Y) && !ellipse(25821.473572, 21973.511734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26561.520000, 23294.996000, 1201.032035, 1201.032035, 0.000000, X, Y)
[Wed May  8 06:48:17 2013] Writing fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src50.gif
[Wed May  8 07:07:50 2013] Mean detx,y = (28.24, 4551.31) 
[Wed May  8 07:07:51 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  8 07:08:08 2013] Binned source spectrum to 10 counts/bin
[Wed May  8 07:08:08 2013] Setting source spectrum file to fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Wed May  8 07:08:08 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Wed May  8 08:00:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  8 08:00:09 2013] rmf not generated due to insufficient counts
[Wed May  8 08:20:41 2013] Updating aperture counts using extracted products
[Wed May  8 08:20:41 2013] Total counts from fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src50_src_b10.pi.gz = 1099.00
[Wed May  8 08:20:41 2013] Total counts from fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src50_bgd.pi.gz = 6855.00
[Wed May  8 08:20:42 2013] Got source and background scale factors 1181752.000000, 8188364.000000
[Wed May  8 08:20:42 2013] User source parameters:
  Position = (269.4, 231.8) = 3 18 2.19 -44 18 0.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 109.7 +/- 34.2
  Background aperture counts = 989.3
  Rate = 0.001 +/- 0.0004

[Wed May  8 08:20:42 2013] Updating counts from extracted products
[Wed May  8 08:20:42 2013] Set source signif. to 109.68/31.45 = 3.49
[Wed May  8 08:20:43 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 08:20:43 2013] Using photon index=1.80, rate=0.00136, arf fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src50.arf
[Wed May  8 08:20:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 08:20:43 2013] Updating source flux to 1.9e-14
[Wed May  8 08:20:50 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  8 08:20:58 2013] xmm0603050201/analysis//spectral/fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete