[Tue May  7 01:14:10 2013] Detection parameters:
  Position = (290.0, 325.0) = 3 17 53.83 -44 11 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 284.9 +/- 31.8
  Background counts = 289.3
  Rate = 0.004 +/- 0.0004

[Tue May  7 01:14:11 2013] Off-axis axis estimate = 2.02'
[Tue May  7 05:51:11 2013] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Tue May  7 05:51:11 2013] Initial guess for spatial extent in simple fitting = 7.44"
[Tue May  7 05:51:11 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.819
[Tue May  7 05:51:11 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 7.44"
[Tue May  7 10:15:50 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_src14.ximg exists
[Tue May  7 10:15:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_src14.csv
[Tue May  7 10:15:50 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_src14_1.ximg exists
[Tue May  7 10:15:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_src14.csv
[Tue May  7 10:15:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 10:15:51 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Tue May  7 10:15:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src14.csv
[Tue May  7 10:15:51 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Tue May  7 10:15:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src14.csv
[Tue May  7 10:15:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 10:16:30 2013] Spatial fit model total counts = 4625.080000, observed total counts = 4080.000000
[Tue May  7 10:16:30 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  7 10:16:30 2013] Vigneting correction estimate = 1.000000
[Tue May  7 10:16:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 10:16:30 2013] Assessing source extent using major
[Tue May  7 10:16:30 2013] Source does appear to be extended
[Tue May  7 10:16:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 16:34:23 2013] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Tue May  7 16:34:23 2013] Initial guess for spatial extent in simple fitting = 7.44"
[Tue May  7 16:34:23 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.819
[Tue May  7 16:34:23 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 7.44"
[Tue May  7 17:37:10 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_src13.ximg exists
[Tue May  7 17:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_src13.csv
[Tue May  7 17:37:10 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue May  7 17:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_src13.csv
[Tue May  7 17:37:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 17:37:10 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue May  7 17:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue May  7 17:37:10 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue May  7 17:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue May  7 17:37:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 17:37:28 2013] Spatial fit model total counts = 4613.540000, observed total counts = 4080.000000
[Tue May  7 17:37:28 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  7 17:37:28 2013] Vigneting correction estimate = 1.000000
[Tue May  7 17:37:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 17:37:28 2013] Assessing source extent using major
[Tue May  7 17:37:28 2013] Source does appear to be extended
[Tue May  7 17:37:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 06:48:17 2013] XMMSAS src. selection expression = ellipse(25182.859375, 28222.955536, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  8 06:48:17 2013] Writing source region out to fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src27_src.reg
[Wed May  8 06:48:17 2013] Extracting stamp from image fullrun_mos2_xmm0603050201_pi300-10000_cl_sm2.00.img.gz, (253, 287) - (328, 362)
[Wed May  8 06:48:17 2013] XMMSAS bgd. selection expression = annulus(25182.859375, 28222.955536, 1087.500000, 2175.000000, X, Y) && !ellipse(24390.840240, 24577.090546, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22206.814000, 27037.306000, 1322.040038, 1322.040038, 0.000000, X, Y) && !ellipse(24223.276031, 28214.573608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21852.338000, 27267.640000, 1264.328036, 1264.328036, 0.000000, X, Y) && !ellipse(23714.787476, 28549.720612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22553.352000, 28114.760000, 1329.000038, 1329.000038, 0.000000, X, Y) && !ellipse(22876.103546, 28578.259521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25830.054000, 27126.634000, 1138.888033, 1138.888033, 0.000000, X, Y)
[Wed May  8 06:48:17 2013] Writing fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src27.gif
[Wed May  8 07:03:25 2013] Mean detx,y = (-1.09, -3664.60) 
[Wed May  8 07:03:26 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  8 07:03:36 2013] Binned source spectrum to 10 counts/bin
[Wed May  8 07:03:36 2013] Setting source spectrum file to fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed May  8 07:03:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Wed May  8 07:38:55 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  8 07:38:55 2013] rmf not generated due to insufficient counts
[Wed May  8 08:20:39 2013] Updating aperture counts using extracted products
[Wed May  8 08:20:39 2013] Total counts from fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 3000.00
[Wed May  8 08:20:39 2013] Total counts from fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src27_bgd.pi.gz = 6470.00
[Wed May  8 08:20:39 2013] Got source and background scale factors 1250776.000000, 4969004.000000
[Wed May  8 08:20:39 2013] User source parameters:
  Position = (290.0, 325.0) = 3 17 53.83 -44 11 18.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1371.4 +/- 55.8
  Background aperture counts = 1628.6
  Rate = 0.02 +/- 0.0007

[Wed May  8 08:20:39 2013] Updating counts from extracted products
[Wed May  8 08:20:39 2013] Set source signif. to 1371.40/40.36 = 33.98
[Wed May  8 08:20:43 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 08:20:43 2013] Using photon index=1.80, rate=0.017, arf fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src27.arf
[Wed May  8 08:20:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 08:20:43 2013] Updating source flux to 1.7e-13
[Wed May  8 08:20:50 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  8 08:20:58 2013] xmm0603050201/analysis//spectral/fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete