[Tue May  7 01:14:10 2013] Detection parameters:
  Position = (280.9, 283.1) = 3 17 57.52 -44 14 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43466.9 +/- 250.5
  Background counts = 430.0
  Rate = 0.6 +/- 0.003

[Tue May  7 01:14:11 2013] Off-axis axis estimate = 1.69'
[Tue May  7 05:51:11 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Tue May  7 05:51:11 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Tue May  7 05:51:11 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Tue May  7 05:51:11 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Tue May  7 10:15:50 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_src1.ximg exists
[Tue May  7 10:15:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_src1.csv
[Tue May  7 10:15:50 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May  7 10:15:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_src1.csv
[Tue May  7 10:15:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 10:15:51 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May  7 10:15:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May  7 10:15:51 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May  7 10:15:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May  7 10:15:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 10:16:30 2013] Spatial fit model total counts = 101962.000000, observed total counts = 91531.000000
[Tue May  7 10:16:30 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  7 10:16:30 2013] Vigneting correction estimate = 1.000000
[Tue May  7 10:16:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 10:16:30 2013] Assessing source extent using major
[Tue May  7 10:16:30 2013] Source does appear to be extended
[Tue May  7 10:16:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 16:34:23 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Tue May  7 16:34:23 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Tue May  7 16:34:23 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Tue May  7 16:34:23 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.27"
[Tue May  7 17:37:10 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_src1.ximg exists
[Tue May  7 17:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_src1.csv
[Tue May  7 17:37:10 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May  7 17:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_src1.csv
[Tue May  7 17:37:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 17:37:10 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May  7 17:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May  7 17:37:10 2013] fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May  7 17:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May  7 17:37:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 17:37:28 2013] Spatial fit model total counts = 114441.000000, observed total counts = 91531.000000
[Tue May  7 17:37:28 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  7 17:37:28 2013] Spatial fit model total counts = 47405.900000, observed total counts = 38443.000000
[Tue May  7 17:37:28 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  7 17:37:28 2013] Vigneting correction estimate = 1.000000
[Tue May  7 17:37:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 17:37:28 2013] Assessing source extent using major
[Tue May  7 17:37:28 2013] Source does appear to be extended
[Tue May  7 17:37:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 06:48:15 2013] Counts = 43466.867188, rescaling region sizes by 3.000000
[Wed May  8 06:48:15 2013] XMMSAS src. selection expression = ellipse(24390.840240, 24577.090546, 1957.500000, 1957.500000, 0.000000, X, Y)
[Wed May  8 06:48:15 2013] Writing source region out to fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src1_src.reg
[Wed May  8 06:48:15 2013] Extracting stamp from image fullrun_mos2_xmm0603050201_pi300-10000_cl_sm2.00.img.gz, (168, 171) - (393, 396)
[Wed May  8 06:48:15 2013] XMMSAS bgd. selection expression = annulus(24390.840240, 24577.090546, 9787.500000, 19575.000000, X, Y) && !ellipse(22966.273400, 25178.633000, 329.368809, 290.017608, 8.653510, X, Y) && !ellipse(23574.609894, 24936.000061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31997.886810, 29291.655273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23350.767029, 21707.737991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26132.019073, 23351.478577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22206.814000, 27037.306000, 1322.040038, 1322.040038, 0.000000, X, Y) && !ellipse(25949.464569, 22657.897308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12698.270432, 19799.714462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31733.746000, 23640.748000, 317.157609, 317.157609, 0.000000, X, Y) && !ellipse(28902.967600, 31891.700400, 424.171212, 249.169607, 24.315042, X, Y) && !ellipse(25578.229400, 19622.563000, 389.936811, 389.936811, 0.000000, X, Y) && !ellipse(23467.404800, 34095.914800, 435.280813, 435.280813, 0.000000, X, Y) && !ellipse(25182.859375, 28222.955536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18118.365760, 17789.857800, 694.916020, 471.111214, 40.625771, X, Y) && !ellipse(36875.666809, 22395.333496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25821.473572, 21973.511734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24223.276031, 28214.573608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38717.442047, 29953.920471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17466.158768, 27719.038940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21852.338000, 27267.640000, 1264.328036, 1264.328036, 0.000000, X, Y) && !ellipse(27220.002289, 31290.156891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14596.803558, 28296.675079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27221.122711, 24480.991760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23714.787476, 28549.720612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22553.352000, 28114.760000, 1329.000038, 1329.000038, 0.000000, X, Y) && !ellipse(23390.921692, 20113.983643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22876.103546, 28578.259521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25830.054000, 27126.634000, 1138.888033, 1138.888033, 0.000000, X, Y) && !ellipse(22496.325500, 9170.343834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26653.140259, 22335.860840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26938.509600, 13668.538200, 1000.856029, 344.237610, 10.319583, X, Y) && !ellipse(31816.694336, 16706.886765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26561.520000, 23294.996000, 1201.032035, 1201.032035, 0.000000, X, Y) && !ellipse(36762.817444, 26662.308075, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  8 06:48:15 2013] Writing fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src1.gif
[Wed May  8 06:48:39 2013] Mean detx,y = (-49.90, -47.01) 
[Wed May  8 06:48:43 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  8 06:56:59 2013] Binned source spectrum to 10 counts/bin
[Wed May  8 06:56:59 2013] Setting source spectrum file to fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May  8 06:56:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May  8 07:10:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  8 07:10:54 2013] rmf not generated due to insufficient counts
[Wed May  8 08:20:37 2013] Updating aperture counts using extracted products
[Wed May  8 08:20:37 2013] Total counts from fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 205203.00
[Wed May  8 08:20:37 2013] Total counts from fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 106258.00
[Wed May  8 08:20:37 2013] Got source and background scale factors 11410950.000000, 549120671.000000
[Wed May  8 08:20:37 2013] User source parameters:
  Position = (280.9, 283.1) = 3 17 57.52 -44 14 19.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 202994.9 +/- 454.0
  Background aperture counts = 2208.1
  Rate = 3 +/- 0.006

[Wed May  8 08:20:37 2013] Updating counts from extracted products
[Wed May  8 08:20:37 2013] Set source signif. to 202994.92/46.99 = 4319.94
[Wed May  8 08:20:43 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 08:20:43 2013] Using photon index=1.80, rate=2.52, arf fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src1.arf
[Wed May  8 08:20:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 08:20:43 2013] Updating source flux to 2.2e-11
[Wed May  8 08:20:50 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  8 08:20:58 2013] xmm0603050201/analysis//spectral/fullrun_mos2_xmm0603050201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete