[Tue May  7 01:13:45 2013] Detection parameters:
  Position = (269.2, 250.1) = 3 18 2.29 -44 16 43.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 646.8 +/- 39.0
  Background counts = 256.7
  Rate = 0.009 +/- 0.0005

[Tue May  7 01:13:46 2013] Off-axis axis estimate = 4.10'
[Tue May  7 04:45:59 2013] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Tue May  7 04:45:59 2013] Initial guess for spatial extent in simple fitting = 8.48"
[Tue May  7 04:45:59 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.042
[Tue May  7 04:45:59 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 8.48"
[Tue May  7 05:51:10 2013] fullrun_mos1_xmm0603050201_pi300-10000_cl_pass0_src8.ximg exists
[Tue May  7 05:51:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050201_pi300-10000_cl_pass0_src8.csv
[Tue May  7 05:51:10 2013] fullrun_mos1_xmm0603050201_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue May  7 05:51:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050201_pi300-10000_cl_pass0_src8.csv
[Tue May  7 05:51:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603050201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603050201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 05:51:11 2013] fullrun_mos1_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue May  7 05:51:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue May  7 05:51:11 2013] fullrun_mos1_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue May  7 05:51:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue May  7 05:51:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603050201_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 10:16:20 2013] Source 9 is offset by 5.553728 and 6.491410 pixels which is larger than
2 X fitted extent = 0.976097 x 0.976097, not incorporating fit results
[Tue May  7 10:16:20 2013] Vigneting correction estimate = 1.000000
[Tue May  7 10:16:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 10:16:20 2013] Assessing source extent using major
[Tue May  7 10:16:20 2013] Source does appear to be extended
[Tue May  7 10:16:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 15:57:44 2013] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Tue May  7 15:57:44 2013] Initial guess for spatial extent in simple fitting = 8.48"
[Tue May  7 15:57:44 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.042
[Tue May  7 15:57:44 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 8.48"
[Tue May  7 16:34:22 2013] fullrun_mos1_xmm0603050201_pi300-10000_cl_pass1_src7.ximg exists
[Tue May  7 16:34:22 2013] fullrun_mos1_xmm0603050201_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue May  7 16:34:22 2013] Fit fullrun_mos1_xmm0603050201_pi300-10000_cl_pass1_src7 appears to have run properly
[Tue May  7 16:34:23 2013] fullrun_mos1_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue May  7 16:34:23 2013] fullrun_mos1_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue May  7 16:34:23 2013] Fit fullrun_mos1_xmm0603050201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue May  7 17:37:24 2013] Spatial fit model total counts = 4490.870000, observed total counts = 4464.000000
[Tue May  7 17:37:24 2013] Offset between fit and detection position for source 9 = 0.131074 pixels
[Tue May  7 17:37:24 2013] 4641.919000 total counts/ 4392.750000 bgd. counts: snr = 3.759463
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.131074 pixels
  Position = (269.1, 250.0) = 3 18 2.31 -44 16 44.1
  Extent = 3.6 (2.9-4.2)", rotation angle = 0
  Source counts = 249.2 +/- 68.1
  Background counts = 4392.8
  Rate = 0.003 +/- 0.0008
[Tue May  7 17:37:24 2013] Vigneting correction estimate = 1.000000
[Tue May  7 17:37:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 17:37:24 2013] Assessing source extent using major axis lower bound
[Tue May  7 17:37:24 2013] Source does appear to be extended
[Tue May  7 17:37:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 17:37:24 2013] Source is confused with source 2
[Wed May  8 06:04:26 2013] XMMSAS src. selection expression = ellipse(23364.191300, 21697.479600, 218.752206, 218.752206, 0.000000, X, Y)
[Wed May  8 06:04:26 2013] Writing source region out to fullrun_mos1_xmm0603050201_pi300-10000_pass1_cl_src9_src.reg
[Wed May  8 06:04:26 2013] Extracting stamp from image fullrun_mos1_xmm0603050201_pi300-10000_cl_sm2.00.img.gz, (257, 237) - (282, 263)
[Wed May  8 06:04:26 2013] XMMSAS bgd. selection expression = annulus(23364.191300, 21697.479600, 364.587010, 729.174021, X, Y) && !ellipse(24389.662400, 24595.295800, 4999.656144, 4005.552115, 77.964200, X, Y) && !ellipse(24305.778412, 22539.801605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23966.718000, 22019.552000, 1277.896037, 1277.896037, 0.000000, X, Y)
[Wed May  8 06:04:26 2013] Writing fullrun_mos1_xmm0603050201_pi300-10000_pass1_cl_src9.gif
[Wed May  8 06:12:11 2013] Mean detx,y = (3250.37, 249.18) 
[Wed May  8 06:12:12 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  8 06:12:23 2013] Binned source spectrum to 10 counts/bin
[Wed May  8 06:12:23 2013] Setting source spectrum file to fullrun_mos1_xmm0603050201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed May  8 06:12:23 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0603050201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed May  8 08:20:35 2013] Updating aperture counts using extracted products
[Wed May  8 08:20:35 2013] Total counts from fullrun_mos1_xmm0603050201_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 574.00
[Wed May  8 08:20:35 2013] Total counts from fullrun_mos1_xmm0603050201_pi300-10000_pass1_cl_src9_bgd.pi.gz = 0.00
[Wed May  8 08:20:35 2013] Got source and background scale factors 155200.000000, 0.000000
[Wed May  8 08:20:35 2013] Background scale factor is not positive, halting re-assessment of this source
[Wed May  8 08:20:37 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 08:20:37 2013] Using photon index=1.80, rate=0.0031, arf fullrun_mos1_xmm0603050201_pi300-10000_pass1_cl_src9.arf
[Wed May  8 08:20:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 08:20:37 2013] Updating source flux to 4.6e-14
[Wed May  8 08:20:45 2013] Flag b found in src. 9 procflags, skipping spectral fitting
[Wed May  8 08:20:45 2013] Flag c found in src. 9 procflags, skipping spectral fitting
[Wed May  8 08:20:50 2013] xmm0603050201/analysis//spectral/fullrun_mos1_xmm0603050201_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete