[Sat May 19 16:57:35 2012] Detection parameters:
  Position = (325.2, 277.6) = 3 17 38.40 -44 15 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 277.6 +/- 27.1
  Background counts = 409.0
  Rate = 0.003 +/- 0.0003

[Sat May 19 16:57:36 2012] Off-axis axis estimate = 2.46'
[Sat May 19 17:07:10 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Sat May 19 17:07:10 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Sat May 19 17:07:10 2012] source mask rpix=1.8, npix_max = 20, mask sum = 11, frac = 0.538
[Sat May 19 17:07:10 2012] Giving source the simple spatial ID 82 for pass 0, mean size = 7.66"
[Sun May 20 00:02:27 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src82.ximg exists
[Sun May 20 00:02:27 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src82_1.ximg exists
[Sun May 20 00:02:27 2012] Fit fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src82 appears to have run properly
[Sun May 20 00:02:29 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Sun May 20 00:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src82.csv
[Sun May 20 00:02:29 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Sun May 20 00:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src82.csv
[Sun May 20 00:02:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 06:37:30 2012] Spatial fit model total counts = -2078.860000, observed total counts = 8030.000000
[Sun May 20 06:37:30 2012] Poor agreement between spatial fit and data for source 88
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 20 06:37:30 2012] Source 88 is offset by -5.631167 and -3.029953 pixels which is larger than
2 X fitted extent = 0.973172 x 0.973172, not incorporating fit results
[Sun May 20 06:37:30 2012] Warning, spatial fit 82 centroid is now closest to src. 86
[Sun May 20 06:37:30 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:30 2012] Assessing source extent using major
[Sun May 20 06:37:30 2012] Source does appear to be extended
[Sun May 20 06:37:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 06:37:30 2012] Source is confused with source 86
[Sun May 20 06:38:06 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Sun May 20 06:38:06 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Sun May 20 06:38:06 2012] source mask rpix=1.8, npix_max = 20, mask sum = 11, frac = 0.538
[Sun May 20 06:38:06 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 7.66"
[Sun May 20 11:36:36 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src67.ximg exists
[Sun May 20 11:36:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src67.csv
[Sun May 20 11:36:36 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src67_1.ximg exists
[Sun May 20 11:36:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src67.csv
[Sun May 20 11:36:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 11:36:38 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Sun May 20 11:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src67.csv
[Sun May 20 11:36:38 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Sun May 20 11:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src67.csv
[Sun May 20 11:36:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 14:56:56 2012] Source 88 is offset by -6.819291 and -1.682816 pixels which is larger than
2 X fitted extent = 2.465532 x 5.642917, not incorporating fit results
[Sun May 20 14:56:56 2012] Spatial fit model total counts = 5620.050000, observed total counts = 4464.000000
[Sun May 20 14:56:56 2012] Poor agreement between spatial fit and data for source 88
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 20 14:56:57 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:56:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:56:57 2012] Assessing source extent using major
[Sun May 20 14:56:57 2012] Source does appear to be extended
[Sun May 20 14:56:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 14:57:47 2012] XMMSAS src. selection expression = ellipse(28247.384460, 24099.148102, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 14:57:47 2012] Writing source region out to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src88_src.reg
[Sun May 20 14:57:47 2012] Extracting stamp from image fullrun_pn_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (288, 240) - (363, 315)
[Sun May 20 14:57:47 2012] XMMSAS bgd. selection expression = annulus(28247.384460, 24099.148102, 1087.500000, 2175.000000, X, Y) && !ellipse(24112.612800, 25081.178600, 6041.112174, 6041.112174, 0.000000, X, Y) && !ellipse(23781.569427, 23677.115265, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23095.572000, 25515.498400, 3720.336107, 3720.336107, 0.000000, X, Y) && !ellipse(26307.245697, 23507.392517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27193.722809, 22075.509995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26826.659698, 24547.117920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26591.222321, 23943.438599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26430.318000, 27607.014000, 2361.176068, 2361.176068, 0.000000, X, Y) && !ellipse(27729.799774, 26372.145233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27249.858093, 25419.706573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28463.312000, 25704.238000, 1169.624034, 1169.624034, 0.000000, X, Y) && !ellipse(28174.445496, 24832.090179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27882.591712, 23806.712717, 1037.182933, 1017.484421, 74.256748, X, Y) && !ellipse(27793.698364, 23156.464020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26437.143005, 22218.608109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26269.002655, 21863.994431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26012.484344, 21438.899017, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 14:57:47 2012] Writing fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src88.gif
[Sun May 20 17:45:23 2012] Mean detx,y = (-3954.13, 884.34) 
[Sun May 20 17:45:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 17:46:02 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 17:46:02 2012] Setting source spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Sun May 20 17:46:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Mon May 21 13:55:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 13:55:23 2012] rmf not generated due to insufficient counts
[Mon May 21 21:31:11 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:11 2012] Error reading totcts from fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Mon May 21 21:31:14 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:14 2012] Using photon index=1.80, rate=0.00281, arf fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src88.arf
[Mon May 21 21:31:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:14 2012] Updating source flux to 1.3e-14
[Mon May 21 21:35:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting