[Sat May 19 16:57:35 2012] Detection parameters:
  Position = (437.8, 279.1) = 3 16 52.84 -44 14 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.9 +/- 24.3
  Background counts = 161.4
  Rate = 0.002 +/- 0.0002

[Sat May 19 16:57:36 2012] Off-axis axis estimate = 10.20'
[Sat May 19 17:07:10 2012] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Sat May 19 17:07:10 2012] Initial guess for spatial extent in simple fitting = 11.53"
[Sat May 19 17:07:10 2012] source mask rpix=2.7, npix_max = 39, mask sum = 32, frac = 0.806
[Sat May 19 17:07:10 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 11.53"
[Sun May 20 00:02:27 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src81.ximg exists
[Sun May 20 00:02:27 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src81_1.ximg exists
[Sun May 20 00:02:27 2012] Fit fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src81 appears to have run properly
[Sun May 20 00:02:29 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Sun May 20 00:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src81.csv
[Sun May 20 00:02:29 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Sun May 20 00:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src81.csv
[Sun May 20 00:02:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 06:37:30 2012] Source 87 is offset by 6.972741 and 4.935828 pixels which is larger than
2 X fitted extent = 1.546391 x 1.546391, not incorporating fit results
[Sun May 20 06:37:30 2012] Warning: source 81 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 87 at 11.371723 pixels away
[Sun May 20 06:37:30 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:30 2012] Assessing source extent using major
[Sun May 20 06:37:30 2012] Source does appear to be extended
[Sun May 20 06:37:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 06:38:06 2012] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Sun May 20 06:38:06 2012] Initial guess for spatial extent in simple fitting = 11.53"
[Sun May 20 06:38:06 2012] source mask rpix=2.7, npix_max = 39, mask sum = 32, frac = 0.806
[Sun May 20 06:38:06 2012] Giving source the simple spatial ID 66 for pass 1, mean size = 11.53"
[Sun May 20 11:36:36 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src66.ximg exists
[Sun May 20 11:36:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src66.csv
[Sun May 20 11:36:36 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src66_1.ximg exists
[Sun May 20 11:36:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src66.csv
[Sun May 20 11:36:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 11:36:38 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Sun May 20 11:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src66.csv
[Sun May 20 11:36:38 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Sun May 20 11:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src66.csv
[Sun May 20 11:36:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 14:56:56 2012] Source 87 is offset by 6.764419 and 6.239713 pixels which is larger than
2 X fitted extent = 1.272193 x 1.272193, not incorporating fit results
[Sun May 20 14:56:56 2012] Warning: source 66 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 87 at 16.162744 pixels away
[Sun May 20 14:56:57 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:56:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:56:57 2012] Assessing source extent using major
[Sun May 20 14:56:57 2012] Source does appear to be extended
[Sun May 20 14:56:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 14:57:47 2012] XMMSAS src. selection expression = ellipse(38037.008484, 24233.843048, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 14:57:47 2012] Writing source region out to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src87_src.reg
[Sun May 20 14:57:47 2012] Extracting stamp from image fullrun_pn_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (400, 242) - (475, 317)
[Sun May 20 14:57:47 2012] XMMSAS bgd. selection expression = annulus(38037.008484, 24233.843048, 1087.500000, 2175.000000, X, Y) && !ellipse(36618.654663, 22845.310516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40994.174805, 23651.961517, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 14:57:47 2012] Writing fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src87.gif
[Sun May 20 17:44:00 2012] Mean detx,y = (-12530.89, 5419.31) 
[Sun May 20 17:44:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 17:44:47 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 17:44:47 2012] Setting source spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Sun May 20 17:44:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Mon May 21 13:54:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 13:54:36 2012] rmf not generated due to insufficient counts
[Mon May 21 21:31:11 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:11 2012] Error reading totcts from fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Mon May 21 21:31:14 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:14 2012] Using photon index=1.80, rate=0.00203, arf fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src87.arf
[Mon May 21 21:31:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:14 2012] Updating source flux to 1.5e-14
[Mon May 21 21:35:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting