[Sat May 19 16:57:35 2012] Detection parameters:
  Position = (321.9, 292.1) = 3 17 39.74 -44 14 3.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.2 +/- 33.3
  Background counts = 475.3
  Rate = 0.003 +/- 0.0005

[Sat May 19 16:57:36 2012] Off-axis axis estimate = 1.76'
[Sat May 19 17:07:10 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sat May 19 17:07:10 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sat May 19 17:07:10 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Sat May 19 17:07:10 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 7.31"
[Sun May 20 00:02:27 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src75.ximg exists
[Sun May 20 00:02:27 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src75_1.ximg exists
[Sun May 20 00:02:27 2012] Fit fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src75 appears to have run properly
[Sun May 20 00:02:29 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Sun May 20 00:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src75.csv
[Sun May 20 00:02:29 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Sun May 20 00:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src75.csv
[Sun May 20 00:02:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 06:37:30 2012] Spatial fit model total counts = 6725.070000, observed total counts = 6111.000000
[Sun May 20 06:37:30 2012] Poor agreement between spatial fit and data for source 81
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 20 06:37:30 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:30 2012] Assessing source extent using major
[Sun May 20 06:37:30 2012] Source does appear to be extended
[Sun May 20 06:37:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 06:37:30 2012] Source is confused with source 83
[Sun May 20 06:38:06 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sun May 20 06:38:06 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sun May 20 06:38:06 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Sun May 20 06:38:06 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 7.31"
[Sun May 20 11:36:36 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src62.ximg exists
[Sun May 20 11:36:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src62.csv
[Sun May 20 11:36:36 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src62_1.ximg exists
[Sun May 20 11:36:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src62.csv
[Sun May 20 11:36:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 11:36:38 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Sun May 20 11:36:38 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Sun May 20 11:36:38 2012] Fit fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Sun May 20 14:56:56 2012] Spatial fit model total counts = 6722.090000, observed total counts = 6111.000000
[Sun May 20 14:56:56 2012] Offset between fit and detection position for source 81 = 6.974702 pixels
[Sun May 20 14:56:56 2012] 6440.410000 total counts/ 6234.090000 bgd. counts: snr = 2.613093
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 6.974702 pixels
  Position = (327.7, 296.0) = 3 17 37.40 -44 13 47.0
  Extent = 14.6 (14.6-29.2)", rotation angle = 0
  Source counts = 206.3 +/- 80.3
  Background counts = 6234.1
  Rate = 0.002 +/- 0.0008
[Sun May 20 14:56:57 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:56:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:56:57 2012] Assessing source extent using major axis lower bound
[Sun May 20 14:56:57 2012] Source does appear to be extended
[Sun May 20 14:56:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 14:57:47 2012] XMMSAS src. selection expression = ellipse(28463.312000, 25704.238000, 877.218025, 877.218025, 0.000000, X, Y)
[Sun May 20 14:57:47 2012] Writing source region out to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src81_src.reg
[Sun May 20 14:57:47 2012] Extracting stamp from image fullrun_pn_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (277, 246) - (378, 346)
[Sun May 20 14:57:47 2012] XMMSAS bgd. selection expression = annulus(28463.312000, 25704.238000, 1462.030042, 2924.060084, X, Y) && !ellipse(24112.612800, 25081.178600, 6041.112174, 6041.112174, 0.000000, X, Y) && !ellipse(23781.569427, 23677.115265, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23095.572000, 25515.498400, 3720.336107, 3720.336107, 0.000000, X, Y) && !ellipse(31449.446560, 24105.520800, 350.216810, 350.216810, 0.000000, X, Y) && !ellipse(26307.245697, 23507.392517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27193.722809, 22075.509995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26826.659698, 24547.117920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26591.222321, 23943.438599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24619.334000, 29233.246000, 1144.784033, 1144.784033, 0.000000, X, Y) && !ellipse(26263.260000, 29613.604000, 1317.064038, 1317.064038, 0.000000, X, Y) && !ellipse(31899.868439, 28918.567902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26748.816895, 28748.454865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27498.158000, 27929.924000, 1152.560033, 1152.560033, 0.000000, X, Y) && !ellipse(26430.318000, 27607.014000, 2361.176068, 2361.176068, 0.000000, X, Y) && !ellipse(27729.799774, 26372.145233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27249.858093, 25419.706573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28174.445496, 24832.090179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31926.633789, 24553.293518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27882.591712, 23806.712717, 1037.182933, 1017.484421, 74.256748, X, Y) && !ellipse(28247.384460, 24099.148102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27793.698364, 23156.464020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26437.143005, 22218.608109, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 14:57:47 2012] Writing fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src81.gif
[Sun May 20 17:32:57 2012] Mean detx,y = (-3289.01, 2386.84) 
[Sun May 20 17:33:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 17:33:27 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 17:33:28 2012] Setting source spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Sun May 20 17:33:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Mon May 21 21:31:11 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:11 2012] Error reading totcts from fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Mon May 21 21:31:14 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:14 2012] Using photon index=1.80, rate=0.00218, arf fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src81.arf
[Mon May 21 21:31:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:14 2012] Updating source flux to 7.3e-15
[Mon May 21 21:35:48 2012] Flag p found in src. 81 procflags, skipping spectral fitting
[Mon May 21 21:35:48 2012] Flag c found in src. 81 procflags, skipping spectral fitting