[Sat May 19 16:57:34 2012] Detection parameters:
  Position = (142.8, 326.3) = 3 18 52.19 -44 11 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 285.2 +/- 27.7
  Background counts = 175.3
  Rate = 0.003 +/- 0.0003

[Sat May 19 16:57:36 2012] Off-axis axis estimate = 11.46'
[Sat May 19 17:07:10 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Sat May 19 17:07:10 2012] Initial guess for spatial extent in simple fitting = 12.16"
[Sat May 19 17:07:10 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.967
[Sat May 19 17:07:10 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 12.16"
[Sun May 20 00:02:27 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src66.ximg exists
[Sun May 20 00:02:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src66.csv
[Sun May 20 00:02:27 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src66_1.ximg exists
[Sun May 20 00:02:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src66.csv
[Sun May 20 00:02:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 00:02:29 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Sun May 20 00:02:29 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Sun May 20 00:02:29 2012] Fit fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src66 appears to have run properly
[Sun May 20 06:37:30 2012] Warning: source 64 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 70 at 12.561108 pixels away
[Sun May 20 06:37:30 2012] Warning, spatial fit 66 centroid is now closest to src. 72
[Sun May 20 06:37:30 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:30 2012] Assessing source extent using major
[Sun May 20 06:37:30 2012] Source does appear to be extended
[Sun May 20 06:37:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 06:38:06 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Sun May 20 06:38:06 2012] Initial guess for spatial extent in simple fitting = 12.16"
[Sun May 20 06:38:06 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.967
[Sun May 20 06:38:06 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 12.16"
[Sun May 20 11:36:36 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src56.ximg exists
[Sun May 20 11:36:36 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src56_1.ximg exists
[Sun May 20 11:36:36 2012] Fit fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src56 appears to have run properly
[Sun May 20 11:36:38 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Sun May 20 11:36:38 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Sun May 20 11:36:38 2012] Fit fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src56 appears to have run properly
[Sun May 20 14:56:56 2012] Source 70 is offset by 0.711817 and 5.412939 pixels which is larger than
2 X fitted extent = 1.450777 x 1.450777, not incorporating fit results
[Sun May 20 14:56:56 2012] Warning, spatial fit 56 centroid is now closest to src. 68
[Sun May 20 14:56:57 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:56:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:56:57 2012] Assessing source extent using major
[Sun May 20 14:56:57 2012] Source does appear to be extended
[Sun May 20 14:56:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 14:57:47 2012] XMMSAS src. selection expression = ellipse(12376.668060, 28340.185699, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 14:57:47 2012] Writing source region out to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src70_src.reg
[Sun May 20 14:57:47 2012] Extracting stamp from image fullrun_pn_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (105, 289) - (180, 364)
[Sun May 20 14:57:47 2012] XMMSAS bgd. selection expression = annulus(12376.668060, 28340.185699, 1087.500000, 2175.000000, X, Y) && !ellipse(13763.985916, 29436.532257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11346.135696, 28858.436798, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 14:57:47 2012] Writing fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src70.gif
[Sun May 20 17:21:58 2012] Mean detx,y = (12125.31, -2443.91) 
[Sun May 20 17:22:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 17:22:26 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 17:22:27 2012] Setting source spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Sun May 20 17:22:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Mon May 21 13:31:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 13:31:15 2012] rmf not generated due to insufficient counts
[Mon May 21 21:31:10 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:10 2012] Error reading totcts from fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Mon May 21 21:31:14 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:14 2012] Using photon index=1.80, rate=0.00289, arf fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src70.arf
[Mon May 21 21:31:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:14 2012] Updating source flux to 1.4e-14
[Mon May 21 21:35:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting