[Sat May 19 16:57:32 2012] Detection parameters: Position = (365.5, 343.0) = 3 17 22.15 -44 10 22.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 3524.3 +/- 74.3 Background counts = 215.5 Rate = 0.04 +/- 0.0008 [Sat May 19 16:57:36 2012] Off-axis axis estimate = 5.83' [Sat May 19 17:07:10 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting [Sat May 19 17:07:10 2012] Initial guess for spatial extent in simple fitting = 9.35" [Sat May 19 17:07:10 2012] source mask rpix=2.1, npix_max = 28, mask sum = 30, frac = 1.069 [Sat May 19 17:07:10 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.35" [Sun May 20 00:02:26 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src6.ximg exists [Sun May 20 00:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src6.csv [Sun May 20 00:02:26 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src6_1.ximg exists [Sun May 20 00:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src6.csv [Sun May 20 00:02:26 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 20 00:02:27 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists [Sun May 20 00:02:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src6.csv [Sun May 20 00:02:27 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists [Sun May 20 00:02:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src6.csv [Sun May 20 00:02:27 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 20 06:37:29 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.204462 pixels away [Sun May 20 06:37:30 2012] Spatial fit model total counts = 2899.980000, observed total counts = 2900.000000 [Sun May 20 06:37:30 2012] Offset between fit and detection position for source 7 = 0.964305 pixels [Sun May 20 06:37:30 2012] Warning, changing simple spatial fit ID from 6 to 62 [Sun May 20 06:37:30 2012] 2888.606000 total counts/ 2511.410000 bgd. counts: snr = 7.526763 Spatial fit parameters: Offset between fit and detection position for source 7 = 0.964305 pixels Position = (365.7, 342.0) = 3 17 22.05 -44 10 26.6 Extent = 6.3 (5.4-7.4)", rotation angle = 0 Source counts = 377.2 +/- 53.7 Background counts = 2511.4 Rate = 0.004 +/- 0.0006 [Sun May 20 06:37:30 2012] Vigneting correction estimate = 1.000000 [Sun May 20 06:37:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 20 06:37:30 2012] Assessing source extent using major axis lower bound [Sun May 20 06:37:30 2012] Source does appear to be extended [Sun May 20 06:37:30 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 20 06:38:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sun May 20 06:38:06 2012] Initial guess for spatial extent in simple fitting = 6.27" [Sun May 20 06:38:06 2012] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.062 [Sun May 20 06:38:06 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 6.27" [Sun May 20 11:36:35 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src6.ximg exists [Sun May 20 11:36:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src6.csv [Sun May 20 11:36:35 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src6_1.ximg exists [Sun May 20 11:36:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src6.csv [Sun May 20 11:36:35 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 20 11:36:36 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists [Sun May 20 11:36:36 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists [Sun May 20 11:36:36 2012] Fit fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly [Sun May 20 14:56:56 2012] Spatial fit model total counts = 5237.330000, observed total counts = 5017.000000 [Sun May 20 14:56:56 2012] Offset between fit and detection position for source 7 = 1.009802 pixels [Sun May 20 14:56:56 2012] 5197.990000 total counts/ 2806.560000 bgd. counts: snr = 45.140931 Spatial fit parameters: Offset between fit and detection position for source 7 = 1.009802 pixels Position = (365.3, 343.0) = 3 17 22.23 -44 10 22.7 Extent = 5.4 (5.2-5.6)", rotation angle = 0 Source counts = 2391.4 +/- 72.1 Background counts = 2806.6 Rate = 0.03 +/- 0.0008 [Sun May 20 14:56:56 2012] Vigneting correction estimate = 1.000000 [Sun May 20 14:56:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 20 14:56:56 2012] Assessing source extent using major axis lower bound [Sun May 20 14:56:56 2012] Source does appear to be extended [Sun May 20 14:56:56 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 20 14:57:43 2012] Counts = 2391.430000, rescaling region sizes by 2.000000 [Sun May 20 14:57:43 2012] XMMSAS src. selection expression = ellipse(31728.654000, 29788.192380, 644.401219, 644.401219, 0.000000, X, Y) [Sun May 20 14:57:43 2012] Writing source region out to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src7_src.reg [Sun May 20 14:57:43 2012] Extracting stamp from image fullrun_pn_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (328, 306) - (402, 380) [Sun May 20 14:57:44 2012] XMMSAS bgd. selection expression = annulus(31728.654000, 29788.192380, 2148.004062, 4296.008124, X, Y) && !ellipse(24112.612800, 25081.178600, 6041.112174, 6041.112174, 0.000000, X, Y) && !ellipse(36486.046200, 27115.196600, 461.422413, 461.422413, 0.000000, X, Y) && !ellipse(28825.252000, 34346.912000, 1665.856048, 796.261623, 123.667000, X, Y) && !ellipse(28565.352000, 33986.888000, 2462.120071, 992.616029, 122.310000, X, Y) && !ellipse(35621.340698, 32266.137695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28656.739700, 32334.167000, 397.013611, 397.013611, 0.000000, X, Y) && !ellipse(27262.812000, 31501.282000, 1450.208042, 1450.208042, 0.000000, X, Y) && !ellipse(26263.260000, 29613.604000, 1317.064038, 1317.064038, 0.000000, X, Y) && !ellipse(31899.868439, 28918.567902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26748.816895, 28748.454865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27498.158000, 27929.924000, 1152.560033, 1152.560033, 0.000000, X, Y) && !ellipse(26430.318000, 27607.014000, 2361.176068, 2361.176068, 0.000000, X, Y) && !ellipse(27729.799774, 26372.145233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27249.858093, 25419.706573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28463.312000, 25704.238000, 1169.624034, 1169.624034, 0.000000, X, Y) && !ellipse(28174.445496, 24832.090179, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 20 14:57:44 2012] Writing fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src7.gif [Sun May 20 15:51:31 2012] Mean detx,y = (-4499.15, 7535.20) [Sun May 20 15:51:39 2012] Setting backscal keywords in source and bgd. spectrum [Sun May 20 15:53:25 2012] Binned source spectrum to 10 counts/bin [Sun May 20 15:53:25 2012] Setting source spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src7_src_b10.pi.gz [Sun May 20 15:53:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src7_bgd.pi.gz [Mon May 21 21:31:09 2012] Updating aperture counts using extracted products [Mon May 21 21:31:09 2012] Error reading totcts from fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src7_src_b10.pi.gz [Mon May 21 21:31:11 2012] Calculating source flux in energy range 0.30-8.00 [Mon May 21 21:31:11 2012] Using photon index=1.80, rate=0.0252, arf fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src7.arf [Mon May 21 21:31:11 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 21 21:31:11 2012] Updating source flux to 1.1e-13