[Sat May 19 16:57:34 2012] Detection parameters:
  Position = (308.0, 331.0) = 3 17 45.37 -44 11 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 241.4 +/- 37.0
  Background counts = 580.8
  Rate = 0.004 +/- 0.0005

[Sat May 19 16:57:36 2012] Off-axis axis estimate = 2.46'
[Sat May 19 17:07:10 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Sat May 19 17:07:10 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Sat May 19 17:07:10 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.783
[Sat May 19 17:07:10 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 7.66"
[Sun May 20 00:02:27 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src63.ximg exists
[Sun May 20 00:02:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src63.csv
[Sun May 20 00:02:27 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src63_1.ximg exists
[Sun May 20 00:02:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src63.csv
[Sun May 20 00:02:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 00:02:29 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sun May 20 00:02:29 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sun May 20 00:02:29 2012] Fit fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Sun May 20 06:37:30 2012] Source 67 is offset by -7.027599 and -2.868995 pixels which is larger than
2 X fitted extent = 4.961379 x 4.961379, not incorporating fit results
[Sun May 20 06:37:30 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:30 2012] Assessing source extent using major
[Sun May 20 06:37:30 2012] Source does appear to be extended
[Sun May 20 06:37:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 06:37:30 2012] Source is confused with source 63
[Sun May 20 06:38:06 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Sun May 20 06:38:06 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Sun May 20 06:38:06 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.783
[Sun May 20 06:38:06 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 7.66"
[Sun May 20 11:36:36 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src53.ximg exists
[Sun May 20 11:36:36 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src53_1.ximg exists
[Sun May 20 11:36:36 2012] Fit fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src53 appears to have run properly
[Sun May 20 11:36:38 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Sun May 20 11:36:38 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Sun May 20 11:36:38 2012] Fit fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Sun May 20 14:56:56 2012] Warning, spatial fit 53 centroid is now closest to src. 71
[Sun May 20 14:56:56 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:56:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:56:56 2012] Assessing source extent using major
[Sun May 20 14:56:56 2012] Source does appear to be extended
[Sun May 20 14:56:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 14:57:46 2012] XMMSAS src. selection expression = ellipse(26748.816895, 28748.454865, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 14:57:46 2012] Writing source region out to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src67_src.reg
[Sun May 20 14:57:46 2012] Extracting stamp from image fullrun_pn_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (271, 293) - (346, 368)
[Sun May 20 14:57:46 2012] XMMSAS bgd. selection expression = annulus(26748.816895, 28748.454865, 1087.500000, 2175.000000, X, Y) && !ellipse(24112.612800, 25081.178600, 6041.112174, 6041.112174, 0.000000, X, Y) && !ellipse(23095.572000, 25515.498400, 3720.336107, 3720.336107, 0.000000, X, Y) && !ellipse(27262.812000, 31501.282000, 1450.208042, 1450.208042, 0.000000, X, Y) && !ellipse(24149.787476, 29941.500244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24619.334000, 29233.246000, 1144.784033, 1144.784033, 0.000000, X, Y) && !ellipse(25739.494232, 29673.974182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26263.260000, 29613.604000, 1317.064038, 1317.064038, 0.000000, X, Y) && !ellipse(27498.158000, 27929.924000, 1152.560033, 1152.560033, 0.000000, X, Y) && !ellipse(26430.318000, 27607.014000, 2361.176068, 2361.176068, 0.000000, X, Y) && !ellipse(27729.799774, 26372.145233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28463.312000, 25704.238000, 1169.624034, 1169.624034, 0.000000, X, Y)
[Sun May 20 14:57:46 2012] Writing fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src67.gif
[Sun May 20 17:18:15 2012] Mean detx,y = (-486.42, 4320.58) 
[Sun May 20 17:18:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 17:18:47 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 17:18:48 2012] Setting source spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Sun May 20 17:18:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Mon May 21 13:30:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 13:30:05 2012] rmf not generated due to insufficient counts
[Mon May 21 21:31:10 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:10 2012] Error reading totcts from fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Mon May 21 21:31:14 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:14 2012] Using photon index=1.80, rate=0.00353, arf fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src67.arf
[Mon May 21 21:31:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:14 2012] Updating source flux to 1.1e-14
[Mon May 21 21:35:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting