[Sat May 19 16:57:34 2012] Detection parameters:
  Position = (249.9, 333.9) = 3 18 8.87 -44 10 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 309.4 +/- 40.1
  Background counts = 636.5
  Rate = 0.004 +/- 0.0006

[Sat May 19 16:57:36 2012] Off-axis axis estimate = 4.36'
[Sat May 19 17:07:10 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Sat May 19 17:07:10 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Sat May 19 17:07:10 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.017
[Sat May 19 17:07:10 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 8.61"
[Sun May 20 00:02:27 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src61.ximg exists
[Sun May 20 00:02:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src61.csv
[Sun May 20 00:02:27 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src61_1.ximg exists
[Sun May 20 00:02:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src61.csv
[Sun May 20 00:02:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 00:02:29 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sun May 20 00:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src61.csv
[Sun May 20 00:02:29 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sun May 20 00:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src61.csv
[Sun May 20 00:02:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 06:37:30 2012] Source 65 is offset by 9.381627 and -3.349560 pixels which is larger than
2 X fitted extent = 1.059586 x 1.059586, not incorporating fit results
[Sun May 20 06:37:30 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:30 2012] Assessing source extent using major
[Sun May 20 06:37:30 2012] Source does appear to be extended
[Sun May 20 06:37:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 06:38:06 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Sun May 20 06:38:06 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Sun May 20 06:38:06 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.017
[Sun May 20 06:38:06 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 8.61"
[Sun May 20 11:36:36 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src51.ximg exists
[Sun May 20 11:36:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src51.csv
[Sun May 20 11:36:36 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src51_1.ximg exists
[Sun May 20 11:36:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src51.csv
[Sun May 20 11:36:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 11:36:38 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sun May 20 11:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sun May 20 11:36:38 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sun May 20 11:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sun May 20 11:36:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 14:56:56 2012] Source 65 is offset by 5.667237 and -4.091790 pixels which is larger than
2 X fitted extent = 2.511531 x 2.511531, not incorporating fit results
[Sun May 20 14:56:56 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:56:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:56:56 2012] Assessing source extent using major
[Sun May 20 14:56:56 2012] Source does appear to be extended
[Sun May 20 14:56:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 14:57:46 2012] XMMSAS src. selection expression = ellipse(21693.229584, 29001.686249, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 14:57:46 2012] Writing source region out to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src65_src.reg
[Sun May 20 14:57:46 2012] Extracting stamp from image fullrun_pn_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (212, 296) - (287, 371)
[Sun May 20 14:57:46 2012] XMMSAS bgd. selection expression = annulus(21693.229584, 29001.686249, 1087.500000, 2175.000000, X, Y) && !ellipse(24112.612800, 25081.178600, 6041.112174, 6041.112174, 0.000000, X, Y) && !ellipse(23095.572000, 25515.498400, 3720.336107, 3720.336107, 0.000000, X, Y) && !ellipse(23635.842800, 28294.376520, 343.697610, 343.697610, 0.000000, X, Y) && !ellipse(21483.998672, 27809.601990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21181.369141, 27288.918884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24149.787476, 29941.500244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24619.334000, 29233.246000, 1144.784033, 1144.784033, 0.000000, X, Y) && !ellipse(22304.127930, 29459.909790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21749.360886, 28329.549652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20560.136093, 27598.362549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20835.498474, 26419.765839, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 14:57:46 2012] Writing fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src65.gif
[Sun May 20 17:16:04 2012] Mean detx,y = (4130.73, 2312.57) 
[Sun May 20 17:16:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 17:16:33 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 17:16:33 2012] Setting source spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Sun May 20 17:16:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Mon May 21 13:29:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 13:29:20 2012] rmf not generated due to insufficient counts
[Mon May 21 21:31:10 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:10 2012] Error reading totcts from fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Mon May 21 21:31:13 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:13 2012] Using photon index=1.80, rate=0.0045, arf fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src65.arf
[Mon May 21 21:31:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:14 2012] Updating source flux to 1.4e-14
[Mon May 21 21:35:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting