[Sat May 19 16:57:34 2012] Detection parameters:
  Position = (272.5, 341.9) = 3 17 59.74 -44 10 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 324.1 +/- 41.1
  Background counts = 727.7
  Rate = 0.005 +/- 0.0006

[Sat May 19 16:57:36 2012] Off-axis axis estimate = 3.67'
[Sat May 19 17:07:10 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Sat May 19 17:07:10 2012] Initial guess for spatial extent in simple fitting = 8.26"
[Sat May 19 17:07:10 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.086
[Sat May 19 17:07:10 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 8.26"
[Sun May 20 00:02:27 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src57.ximg exists
[Sun May 20 00:02:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src57.csv
[Sun May 20 00:02:27 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src57_1.ximg exists
[Sun May 20 00:02:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src57.csv
[Sun May 20 00:02:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 00:02:28 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Sun May 20 00:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src57.csv
[Sun May 20 00:02:29 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Sun May 20 00:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src57.csv
[Sun May 20 00:02:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 06:37:30 2012] Spatial fit model total counts = 8200.040000, observed total counts = 7862.000000
[Sun May 20 06:37:30 2012] Offset between fit and detection position for source 61 = 0.295095 pixels
[Sun May 20 06:37:30 2012] Warning, changing simple spatial fit ID from 57 to 53
[Sun May 20 06:37:30 2012] 8021.886900 total counts/ 7992.260000 bgd. counts: snr = 0.331399
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 0.295095 pixels
  Position = (272.5, 341.6) = 3 17 59.73 -44 10 28.9
  Extent = 2.3 (2.1-16.5)", rotation angle = 0
  Source counts = 29.6 +/- 89.6
  Background counts = 7992.3
  Rate = 0.0003 +/- 0.0009
  Deleting source due to low Poisson probability