[Sat May 19 16:57:33 2012] Detection parameters:
  Position = (378.4, 175.0) = 3 17 16.80 -44 22 33.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 375.6 +/- 32.6
  Background counts = 186.6
  Rate = 0.004 +/- 0.0003

[Sat May 19 16:57:36 2012] Off-axis axis estimate = 10.66'
[Sat May 19 17:07:10 2012] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Sat May 19 17:07:10 2012] Initial guess for spatial extent in simple fitting = 11.76"
[Sat May 19 17:07:10 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.023
[Sat May 19 17:07:10 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 11.76"
[Sun May 20 00:02:26 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src28.ximg exists
[Sun May 20 00:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src28.csv
[Sun May 20 00:02:26 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun May 20 00:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src28.csv
[Sun May 20 00:02:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 00:02:28 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun May 20 00:02:28 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun May 20 00:02:28 2012] Fit fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sun May 20 06:37:30 2012] Warning, spatial fit 28 centroid is now closest to src. 107
[Sun May 20 06:37:30 2012] Warning: source 97 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 13.355627 pixels away
[Sun May 20 06:37:30 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:30 2012] Assessing source extent using major
[Sun May 20 06:37:30 2012] Source does appear to be extended
[Sun May 20 06:37:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 06:38:06 2012] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Sun May 20 06:38:06 2012] Initial guess for spatial extent in simple fitting = 11.76"
[Sun May 20 06:38:06 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.023
[Sun May 20 06:38:06 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 11.76"
[Sun May 20 11:36:35 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src28.ximg exists
[Sun May 20 11:36:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src28.csv
[Sun May 20 11:36:35 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src28_1.ximg exists
[Sun May 20 11:36:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src28.csv
[Sun May 20 11:36:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 11:36:37 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sun May 20 11:36:37 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sun May 20 11:36:37 2012] Fit fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sun May 20 14:56:56 2012] Warning, spatial fit 28 centroid is now closest to src. 109
[Sun May 20 14:56:56 2012] Source 32 is offset by -5.680004 and -3.378949 pixels which is larger than
2 X fitted extent = 1.311779 x 1.311779, not incorporating fit results
[Sun May 20 14:56:56 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:56:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:56:56 2012] Assessing source extent using major
[Sun May 20 14:56:56 2012] Source does appear to be extended
[Sun May 20 14:56:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 14:57:45 2012] XMMSAS src. selection expression = ellipse(32873.021637, 15176.323441, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 14:57:45 2012] Writing source region out to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src32_src.reg
[Sun May 20 14:57:45 2012] Extracting stamp from image fullrun_pn_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (341, 137) - (416, 212)
[Sun May 20 14:57:45 2012] XMMSAS bgd. selection expression = annulus(32873.021637, 15176.323441, 1087.500000, 2175.000000, X, Y) && !ellipse(31569.742096, 17094.368378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32558.583862, 16039.688522, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 14:57:45 2012] Writing fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src32.gif
[Sun May 20 16:43:52 2012] Mean detx,y = (-12086.55, -4990.95) 
[Sun May 20 16:44:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 16:44:24 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 16:44:24 2012] Setting source spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sun May 20 16:44:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Mon May 21 12:50:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 12:50:26 2012] rmf not generated due to insufficient counts
[Mon May 21 21:31:10 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:10 2012] Error reading totcts from fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon May 21 21:31:12 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:12 2012] Using photon index=1.80, rate=0.0038, arf fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src32.arf
[Mon May 21 21:31:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:13 2012] Updating source flux to 2.4e-14
[Mon May 21 21:35:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting