[Sat May 19 16:57:33 2012] Detection parameters:
  Position = (306.2, 275.8) = 3 17 46.10 -44 15 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 750.9 +/- 47.1
  Background counts = 575.5
  Rate = 0.01 +/- 0.0007

[Sat May 19 16:57:36 2012] Off-axis axis estimate = 1.74'
[Sat May 19 17:07:10 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sat May 19 17:07:10 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sat May 19 17:07:10 2012] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.633
[Sat May 19 17:07:10 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 7.30"
[Sun May 20 00:02:26 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src27.ximg exists
[Sun May 20 00:02:26 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src27.csv
[Sun May 20 00:02:26 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun May 20 00:02:26 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src27.csv
[Sun May 20 00:02:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 00:02:28 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun May 20 00:02:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sun May 20 00:02:28 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun May 20 00:02:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sun May 20 00:02:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 06:37:30 2012] Warning, spatial fit 27 centroid is now closest to src. 14
[Sun May 20 06:37:30 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:30 2012] Assessing source extent using major
[Sun May 20 06:37:30 2012] Source does appear to be extended
[Sun May 20 06:37:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 06:37:30 2012] Source is confused with source 14
[Sun May 20 06:38:06 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun May 20 06:38:06 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun May 20 06:38:06 2012] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.633
[Sun May 20 06:38:06 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 7.30"
[Sun May 20 11:36:35 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src27.ximg exists
[Sun May 20 11:36:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src27.csv
[Sun May 20 11:36:35 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun May 20 11:36:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src27.csv
[Sun May 20 11:36:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 11:36:37 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun May 20 11:36:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sun May 20 11:36:37 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun May 20 11:36:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sun May 20 11:36:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 14:56:56 2012] Source 31 is offset by 6.913728 and -3.823901 pixels which is larger than
2 X fitted extent = 6.701288 x 6.701288, not incorporating fit results
[Sun May 20 14:56:56 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:56:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:56:56 2012] Assessing source extent using major
[Sun May 20 14:56:56 2012] Source does appear to be extended
[Sun May 20 14:56:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 14:57:45 2012] XMMSAS src. selection expression = ellipse(26591.222321, 23943.438599, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 14:57:45 2012] Writing source region out to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src31_src.reg
[Sun May 20 14:57:45 2012] Extracting stamp from image fullrun_pn_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (269, 238) - (344, 313)
[Sun May 20 14:57:45 2012] XMMSAS bgd. selection expression = annulus(26591.222321, 23943.438599, 1087.500000, 2175.000000, X, Y) && !ellipse(24112.612800, 25081.178600, 6041.112174, 6041.112174, 0.000000, X, Y) && !ellipse(23781.569427, 23677.115265, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23095.572000, 25515.498400, 3720.336107, 3720.336107, 0.000000, X, Y) && !ellipse(26307.245697, 23507.392517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27193.722809, 22075.509995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26826.659698, 24547.117920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26430.318000, 27607.014000, 2361.176068, 2361.176068, 0.000000, X, Y) && !ellipse(27729.799774, 26372.145233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27249.858093, 25419.706573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28463.312000, 25704.238000, 1169.624034, 1169.624034, 0.000000, X, Y) && !ellipse(28174.445496, 24832.090179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27882.591712, 23806.712717, 1037.182933, 1017.484421, 74.256748, X, Y) && !ellipse(28247.384460, 24099.148102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27793.698364, 23156.464020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26437.143005, 22218.608109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26269.002655, 21863.994431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26012.484344, 21438.899017, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 14:57:45 2012] Writing fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src31.gif
[Sun May 20 16:42:03 2012] Mean detx,y = (-2571.04, -7.93) 
[Sun May 20 16:42:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 16:42:57 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 16:42:58 2012] Setting source spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sun May 20 16:42:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Mon May 21 12:49:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 12:49:59 2012] rmf not generated due to insufficient counts
[Mon May 21 21:31:10 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:10 2012] Error reading totcts from fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon May 21 21:31:12 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:12 2012] Using photon index=1.80, rate=0.0118, arf fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src31.arf
[Mon May 21 21:31:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:12 2012] Updating source flux to 4.3e-14
[Mon May 21 21:35:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting