[Sat May 19 16:57:33 2012] Detection parameters:
  Position = (443.6, 350.2) = 3 16 50.56 -44 9 49.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1117.2 +/- 45.1
  Background counts = 156.2
  Rate = 0.01 +/- 0.0005

[Sat May 19 16:57:36 2012] Off-axis axis estimate = 11.17'
[Sat May 19 17:07:10 2012] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Sat May 19 17:07:10 2012] Initial guess for spatial extent in simple fitting = 12.02"
[Sat May 19 17:07:10 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.987
[Sat May 19 17:07:10 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 12.02"
[Sun May 20 00:02:26 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src21.ximg exists
[Sun May 20 00:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src21.csv
[Sun May 20 00:02:26 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun May 20 00:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src21.csv
[Sun May 20 00:02:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 00:02:28 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun May 20 00:02:28 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun May 20 00:02:28 2012] Fit fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun May 20 06:37:30 2012] Warning, spatial fit 21 centroid is now closest to src. 46
[Sun May 20 06:37:30 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:30 2012] Assessing source extent using major
[Sun May 20 06:37:30 2012] Source does appear to be extended
[Sun May 20 06:37:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 06:38:06 2012] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Sun May 20 06:38:06 2012] Initial guess for spatial extent in simple fitting = 12.02"
[Sun May 20 06:38:06 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.987
[Sun May 20 06:38:06 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 12.02"
[Sun May 20 11:36:35 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src21.ximg exists
[Sun May 20 11:36:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src21.csv
[Sun May 20 11:36:35 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun May 20 11:36:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src21.csv
[Sun May 20 11:36:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 11:36:37 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun May 20 11:36:37 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun May 20 11:36:37 2012] Fit fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun May 20 14:56:56 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 15.336443 pixels away
[Sun May 20 14:56:56 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:56:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:56:56 2012] Assessing source extent using major
[Sun May 20 14:56:56 2012] Source does appear to be extended
[Sun May 20 14:56:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 14:57:44 2012] Counts = 1117.238403, rescaling region sizes by 2.000000
[Sun May 20 14:57:44 2012] XMMSAS src. selection expression = ellipse(38545.698822, 30419.060364, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun May 20 14:57:44 2012] Writing source region out to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src25_src.reg
[Sun May 20 14:57:44 2012] Extracting stamp from image fullrun_pn_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (369, 275) - (519, 425)
[Sun May 20 14:57:45 2012] XMMSAS bgd. selection expression = annulus(38545.698822, 30419.060364, 4350.000000, 8700.000000, X, Y) && !ellipse(24112.612800, 25081.178600, 6041.112174, 6041.112174, 0.000000, X, Y) && !ellipse(31728.654000, 29788.192380, 429.600812, 429.600812, 0.000000, X, Y) && !ellipse(42872.284119, 26659.124695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31449.446560, 24105.520800, 350.216810, 350.216810, 0.000000, X, Y) && !ellipse(36618.654663, 22845.310516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29583.788147, 20894.866257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36486.046200, 27115.196600, 461.422413, 461.422413, 0.000000, X, Y) && !ellipse(31523.255188, 37018.148956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30494.832000, 37668.546000, 1463.904042, 1463.904042, 0.000000, X, Y) && !ellipse(30106.554000, 36775.686000, 1768.280051, 1768.280051, 0.000000, X, Y) && !ellipse(28825.252000, 34346.912000, 1665.856048, 796.261623, 123.667000, X, Y) && !ellipse(28565.352000, 33986.888000, 2462.120071, 992.616029, 122.310000, X, Y) && !ellipse(35621.340698, 32266.137695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31899.868439, 28918.567902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31926.633789, 24553.293518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38037.008484, 24233.843048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40994.174805, 23651.961517, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 14:57:45 2012] Writing fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src25.gif
[Sun May 20 16:20:52 2012] Mean detx,y = (-10295.14, 11162.25) 
[Sun May 20 16:21:01 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 16:23:50 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 16:23:51 2012] Setting source spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun May 20 16:23:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Mon May 21 12:30:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 12:30:49 2012] rmf not generated due to insufficient counts
[Mon May 21 21:31:09 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:10 2012] Error reading totcts from fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon May 21 21:31:12 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:12 2012] Using photon index=1.80, rate=0.0113, arf fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src25.arf
[Mon May 21 21:31:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:12 2012] Updating source flux to 7.4e-14
[Mon May 21 21:35:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting