[Sat May 19 16:57:33 2012] Detection parameters:
  Position = (206.2, 210.7) = 3 18 26.65 -44 19 58.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1114.2 +/- 44.2
  Background counts = 186.8
  Rate = 0.01 +/- 0.0004

[Sat May 19 16:57:36 2012] Off-axis axis estimate = 9.23'
[Sat May 19 17:07:10 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Sat May 19 17:07:10 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Sat May 19 17:07:10 2012] source mask rpix=2.5, npix_max = 36, mask sum = 32, frac = 0.866
[Sat May 19 17:07:10 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 11.04"
[Sun May 20 00:02:26 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src17.ximg exists
[Sun May 20 00:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src17.csv
[Sun May 20 00:02:26 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun May 20 00:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src17.csv
[Sun May 20 00:02:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 00:02:28 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun May 20 00:02:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun May 20 00:02:28 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun May 20 00:02:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun May 20 00:02:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 06:37:30 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 13.582565 pixels away
[Sun May 20 06:37:30 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:30 2012] Assessing source extent using major
[Sun May 20 06:37:30 2012] Source does appear to be extended
[Sun May 20 06:37:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 06:38:06 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Sun May 20 06:38:06 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Sun May 20 06:38:06 2012] source mask rpix=2.5, npix_max = 36, mask sum = 32, frac = 0.866
[Sun May 20 06:38:06 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 11.04"
[Sun May 20 11:36:35 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src17.ximg exists
[Sun May 20 11:36:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src17.csv
[Sun May 20 11:36:35 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun May 20 11:36:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src17.csv
[Sun May 20 11:36:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 11:36:37 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun May 20 11:36:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun May 20 11:36:37 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun May 20 11:36:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun May 20 11:36:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 14:56:56 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 14.570328 pixels away
[Sun May 20 14:56:56 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:56:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:56:56 2012] Assessing source extent using major
[Sun May 20 14:56:56 2012] Source does appear to be extended
[Sun May 20 14:56:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 14:57:44 2012] Counts = 1114.183472, rescaling region sizes by 2.000000
[Sun May 20 14:57:44 2012] XMMSAS src. selection expression = ellipse(17889.196533, 18278.503479, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun May 20 14:57:44 2012] Writing source region out to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src21_src.reg
[Sun May 20 14:57:44 2012] Extracting stamp from image fullrun_pn_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (131, 136) - (281, 286)
[Sun May 20 14:57:44 2012] XMMSAS bgd. selection expression = annulus(17889.196533, 18278.503479, 4350.000000, 8700.000000, X, Y) && !ellipse(24112.612800, 25081.178600, 6041.112174, 6041.112174, 0.000000, X, Y) && !ellipse(22763.169220, 24205.006775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23781.569427, 23677.115265, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23095.572000, 25515.498400, 3720.336107, 3720.336107, 0.000000, X, Y) && !ellipse(20787.998672, 25336.997101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22247.514740, 9633.584717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26307.245697, 23507.392517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27193.722809, 22075.509995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23121.509000, 22183.988800, 350.184443, 350.184443, 0.000000, X, Y) && !ellipse(12449.149033, 20183.613113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26673.565399, 14110.075623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24412.119120, 14131.204800, 343.248010, 343.248010, 0.000000, X, Y) && !ellipse(21483.998672, 27809.601990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21181.369141, 27288.918884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26826.659698, 24547.117920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26591.222321, 23943.438599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27498.158000, 27929.924000, 1152.560033, 1152.560033, 0.000000, X, Y) && !ellipse(20560.136093, 27598.362549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26430.318000, 27607.014000, 2361.176068, 2361.176068, 0.000000, X, Y) && !ellipse(20835.498474, 26419.765839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27249.858093, 25419.706573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20028.949692, 25095.965576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10818.085548, 22507.590790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26437.143005, 22218.608109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21678.889771, 22501.393951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26269.002655, 21863.994431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19793.553467, 21448.098694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26012.484344, 21438.899017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23147.013200, 20669.916600, 408.416812, 408.416812, 0.000000, X, Y) && !ellipse(13858.190338, 20035.081482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26124.077881, 19565.990906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24924.830000, 17703.660000, 3202.928092, 3202.928092, 0.000000, X, Y) && !ellipse(24612.286000, 16782.396000, 1601.464046, 1601.464046, 0.000000, X, Y) && !ellipse(16208.553696, 14524.278778, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 14:57:44 2012] Writing fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src21.gif
[Sun May 20 16:12:55 2012] Mean detx,y = (2578.31, -8956.09) 
[Sun May 20 16:13:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 16:16:18 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 16:16:19 2012] Setting source spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun May 20 16:16:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon May 21 12:24:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 12:24:51 2012] rmf not generated due to insufficient counts
[Mon May 21 21:31:09 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:09 2012] Error reading totcts from fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon May 21 21:31:12 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:12 2012] Using photon index=1.80, rate=0.0113, arf fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src21.arf
[Mon May 21 21:31:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:12 2012] Updating source flux to 4.6e-14
[Mon May 21 21:35:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting