[Sat May 19 16:57:32 2012] Detection parameters:
  Position = (313.1, 254.3) = 3 17 43.30 -44 16 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 337.4 +/- 34.0
  Background counts = 456.5
  Rate = 0.003 +/- 0.0003

[Sat May 19 16:57:36 2012] Off-axis axis estimate = 3.37'
[Sat May 19 17:07:10 2012] Using EEF radius (= 8.11 ")to estimate initial spatial extent for simple fitting
[Sat May 19 17:07:10 2012] Initial guess for spatial extent in simple fitting = 8.11"
[Sat May 19 17:07:10 2012] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.804
[Sat May 19 17:07:10 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.11"
[Sun May 20 00:02:26 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src13.ximg exists
[Sun May 20 00:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src13.csv
[Sun May 20 00:02:26 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun May 20 00:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src13.csv
[Sun May 20 00:02:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 00:02:28 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun May 20 00:02:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun May 20 00:02:28 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun May 20 00:02:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun May 20 00:02:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 06:37:30 2012] Warning, spatial fit 13 centroid is now closest to src. 93
[Sun May 20 06:37:30 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:30 2012] Assessing source extent using major
[Sun May 20 06:37:30 2012] Source does appear to be extended
[Sun May 20 06:37:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 06:38:06 2012] Using EEF radius (= 8.11 ")to estimate initial spatial extent for simple fitting
[Sun May 20 06:38:06 2012] Initial guess for spatial extent in simple fitting = 8.11"
[Sun May 20 06:38:06 2012] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.804
[Sun May 20 06:38:06 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.11"
[Sun May 20 11:36:35 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src13.ximg exists
[Sun May 20 11:36:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src13.csv
[Sun May 20 11:36:35 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun May 20 11:36:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src13.csv
[Sun May 20 11:36:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 11:36:37 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun May 20 11:36:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun May 20 11:36:37 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun May 20 11:36:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun May 20 11:36:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 14:56:56 2012] Spatial fit model total counts = 5312.830000, observed total counts = 4311.000000
[Sun May 20 14:56:56 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 20 14:56:56 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:56:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:56:56 2012] Assessing source extent using major
[Sun May 20 14:56:56 2012] Source does appear to be extended
[Sun May 20 14:56:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 14:57:44 2012] XMMSAS src. selection expression = ellipse(27193.722809, 22075.509995, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 14:57:44 2012] Writing source region out to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src16_src.reg
[Sun May 20 14:57:44 2012] Extracting stamp from image fullrun_pn_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (276, 217) - (351, 292)
[Sun May 20 14:57:44 2012] XMMSAS bgd. selection expression = annulus(27193.722809, 22075.509995, 1087.500000, 2175.000000, X, Y) && !ellipse(24112.612800, 25081.178600, 6041.112174, 6041.112174, 0.000000, X, Y) && !ellipse(23781.569427, 23677.115265, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23095.572000, 25515.498400, 3720.336107, 3720.336107, 0.000000, X, Y) && !ellipse(26307.245697, 23507.392517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29583.788147, 20894.866257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26826.659698, 24547.117920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26591.222321, 23943.438599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28174.445496, 24832.090179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27882.591712, 23806.712717, 1037.182933, 1017.484421, 74.256748, X, Y) && !ellipse(28247.384460, 24099.148102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27793.698364, 23156.464020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26437.143005, 22218.608109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26269.002655, 21863.994431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26012.484344, 21438.899017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26124.077881, 19565.990906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24924.830000, 17703.660000, 3202.928092, 3202.928092, 0.000000, X, Y)
[Sun May 20 14:57:44 2012] Writing fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src16.gif
[Sun May 20 16:06:56 2012] Mean detx,y = (-3890.87, -1494.99) 
[Sun May 20 16:07:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 16:07:31 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 16:07:32 2012] Setting source spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun May 20 16:07:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Mon May 21 12:19:16 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 12:19:16 2012] rmf not generated due to insufficient counts
[Mon May 21 21:31:09 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:09 2012] Error reading totcts from fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon May 21 21:31:12 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:12 2012] Using photon index=1.80, rate=0.00342, arf fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src16.arf
[Mon May 21 21:31:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:12 2012] Updating source flux to 1.5e-14
[Mon May 21 21:35:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting