[Sat May 19 16:57:32 2012] Detection parameters: Position = (302.9, 270.8) = 3 17 47.43 -44 15 34.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1012.4 +/- 48.1 Background counts = 581.4 Rate = 0.02 +/- 0.0008 [Sat May 19 16:57:36 2012] Off-axis axis estimate = 2.03' [Sat May 19 17:07:10 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting [Sat May 19 17:07:10 2012] Initial guess for spatial extent in simple fitting = 7.45" [Sat May 19 17:07:10 2012] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.511 [Sat May 19 17:07:10 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.45" [Sun May 20 00:02:26 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src11.ximg exists [Sun May 20 00:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src11.csv [Sun May 20 00:02:26 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src11_1.ximg exists [Sun May 20 00:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src11.csv [Sun May 20 00:02:26 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src11_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 20 00:02:28 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists [Sun May 20 00:02:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src11.csv [Sun May 20 00:02:28 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists [Sun May 20 00:02:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src11.csv [Sun May 20 00:02:28 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 20 06:37:30 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 10.151314 pixels away [Sun May 20 06:37:30 2012] Spatial fit model total counts = -1871.080000, observed total counts = 10984.000000 [Sun May 20 06:37:30 2012] Poor agreement between spatial fit and data for source 14 It may help to tweak spatial fit manually Not incorporating fit results [Sun May 20 06:37:30 2012] Vigneting correction estimate = 1.000000 [Sun May 20 06:37:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 20 06:37:30 2012] Assessing source extent using major [Sun May 20 06:37:30 2012] Source does appear to be extended [Sun May 20 06:37:30 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 20 06:37:30 2012] Source is confused with source 31 [Sun May 20 06:38:06 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting [Sun May 20 06:38:06 2012] Initial guess for spatial extent in simple fitting = 7.45" [Sun May 20 06:38:06 2012] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.511 [Sun May 20 06:38:06 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.45" [Sun May 20 11:36:35 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src11.ximg exists [Sun May 20 11:36:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src11.csv [Sun May 20 11:36:35 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src11_1.ximg exists [Sun May 20 11:36:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src11.csv [Sun May 20 11:36:35 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src11_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 20 11:36:37 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists [Sun May 20 11:36:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src11.csv [Sun May 20 11:36:37 2012] fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists [Sun May 20 11:36:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src11.csv [Sun May 20 11:36:37 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 20 14:56:56 2012] Spatial fit model total counts = 16591.500000, observed total counts = 10657.000000 [Sun May 20 14:56:56 2012] Poor agreement between spatial fit and data for source 14 It may help to tweak spatial fit manually Not incorporating fit results [Sun May 20 14:56:56 2012] Vigneting correction estimate = 1.000000 [Sun May 20 14:56:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 20 14:56:56 2012] Assessing source extent using major [Sun May 20 14:56:56 2012] Source does appear to be extended [Sun May 20 14:56:56 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 20 14:57:44 2012] Counts = 1012.379578, rescaling region sizes by 2.000000 [Sun May 20 14:57:44 2012] XMMSAS src. selection expression = ellipse(26307.245697, 23507.392517, 1305.000000, 1305.000000, 0.000000, X, Y) [Sun May 20 14:57:44 2012] Writing source region out to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src14_src.reg [Sun May 20 14:57:44 2012] Extracting stamp from image fullrun_pn_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (228, 196) - (378, 346) [Sun May 20 14:57:44 2012] XMMSAS bgd. selection expression = annulus(26307.245697, 23507.392517, 4350.000000, 8700.000000, X, Y) && !ellipse(24112.612800, 25081.178600, 6041.112174, 6041.112174, 0.000000, X, Y) && !ellipse(22763.169220, 24205.006775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23781.569427, 23677.115265, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23095.572000, 25515.498400, 3720.336107, 3720.336107, 0.000000, X, Y) && !ellipse(17304.204636, 28330.306335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31728.654000, 29788.192380, 429.600812, 429.600812, 0.000000, X, Y) && !ellipse(20787.998672, 25336.997101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23635.842800, 28294.376520, 343.697610, 343.697610, 0.000000, X, Y) && !ellipse(31449.446560, 24105.520800, 350.216810, 350.216810, 0.000000, X, Y) && !ellipse(27193.722809, 22075.509995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23121.509000, 22183.988800, 350.184443, 350.184443, 0.000000, X, Y) && !ellipse(29583.788147, 20894.866257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17889.196533, 18278.503479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31569.742096, 17094.368378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26673.565399, 14110.075623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22773.026000, 34580.339475, 2462.032071, 2462.032071, 0.000000, X, Y) && !ellipse(21483.998672, 27809.601990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21181.369141, 27288.918884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26826.659698, 24547.117920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26591.222321, 23943.438599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32873.021637, 15176.323441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28565.352000, 33986.888000, 2462.120071, 992.616029, 122.310000, X, Y) && !ellipse(35621.340698, 32266.137695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28656.739700, 32334.167000, 397.013611, 397.013611, 0.000000, X, Y) && !ellipse(27262.812000, 31501.282000, 1450.208042, 1450.208042, 0.000000, X, Y) && !ellipse(26999.130240, 31739.837000, 404.887212, 404.887212, 0.000000, X, Y) && !ellipse(24149.787476, 29941.500244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24619.334000, 29233.246000, 1144.784033, 1144.784033, 0.000000, X, Y) && !ellipse(25739.494232, 29673.974182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26263.260000, 29613.604000, 1317.064038, 1317.064038, 0.000000, X, Y) && !ellipse(22304.127930, 29459.909790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21693.229584, 29001.686249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31899.868439, 28918.567902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26748.816895, 28748.454865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21749.360886, 28329.549652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27498.158000, 27929.924000, 1152.560033, 1152.560033, 0.000000, X, Y) && !ellipse(20560.136093, 27598.362549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26430.318000, 27607.014000, 2361.176068, 2361.176068, 0.000000, X, Y) && !ellipse(27729.799774, 26372.145233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20835.498474, 26419.765839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27249.858093, 25419.706573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28463.312000, 25704.238000, 1169.624034, 1169.624034, 0.000000, X, Y) && !ellipse(28174.445496, 24832.090179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20028.949692, 25095.965576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31926.633789, 24553.293518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27882.591712, 23806.712717, 1037.182933, 1017.484421, 74.256748, X, Y) && !ellipse(28247.384460, 24099.148102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27793.698364, 23156.464020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26437.143005, 22218.608109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21678.889771, 22501.393951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26269.002655, 21863.994431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19793.553467, 21448.098694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26012.484344, 21438.899017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35635.051270, 20527.553574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23147.013200, 20669.916600, 408.416812, 408.416812, 0.000000, X, Y) && !ellipse(26124.077881, 19565.990906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24924.830000, 17703.660000, 3202.928092, 3202.928092, 0.000000, X, Y) && !ellipse(24612.286000, 16782.396000, 1601.464046, 1601.464046, 0.000000, X, Y) && !ellipse(32558.583862, 16039.688522, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 20 14:57:44 2012] Writing fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src14.gif [Sun May 20 16:02:10 2012] Mean detx,y = (-2071.50, -378.35) [Sun May 20 16:02:26 2012] Setting backscal keywords in source and bgd. spectrum [Sun May 20 16:04:58 2012] Binned source spectrum to 10 counts/bin [Sun May 20 16:04:59 2012] Setting source spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src14_src_b10.pi.gz [Sun May 20 16:04:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src14_bgd.pi.gz [Mon May 21 12:17:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 21 12:17:56 2012] rmf not generated due to insufficient counts [Mon May 21 21:31:09 2012] Updating aperture counts using extracted products [Mon May 21 21:31:09 2012] Error reading totcts from fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src14_src_b10.pi.gz [Mon May 21 21:31:12 2012] Calculating source flux in energy range 0.30-8.00 [Mon May 21 21:31:12 2012] Using photon index=1.80, rate=0.0172, arf fullrun_pn_xmm0603050101_pi300-10000_pass1_cl_src14.arf [Mon May 21 21:31:12 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 21 21:31:12 2012] Updating source flux to 6.9e-14 [Mon May 21 21:35:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting